kernel/linux.git/drivers/mtd/maps/Kconfig, branch v6.19.11

mtd: Remove support for Carillo Ranch driver

2024-02-26T10:29:36+00:00

As far as anybody can tell, this product never shipped. If it did, it shipped in 2007 and nobody has access to one any more. Remove the mtd NOR driver. Signed-off-by: Matthew Wilcox (Oracle) Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20231208224703.1603264-2-willy@infradead.org

mtd: maps: ixp4xx: Drop driver

2022-04-25T08:37:49+00:00

This custom maps driver was never used with the device tree enabled IXP4xx systems, which use the physmap add-on from commit 2aba2f2a704d ("mtd: physmap_of: add a hook for Intel IXP4xx flash probing") Since kernel v5.18-rc1 IXP4xx is only booting from the device tree so drop this old driver. Signed-off-by: Linus Walleij Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220407210844.2489682-1-linus.walleij@linaro.org

MIPS: TXX9: Remove rbtx4939 board support

2022-01-02T13:10:40+00:00

No active MIPS user own this board, so let's remove it. Signed-off-by: Thomas Bogendoerfer Reviewed-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven

mtd: fixup CFI on ixp4xx

2021-10-15T10:27:10+00:00

drivers/mtd/maps/ixp4xx.c requires MTD_CFI_BE_BYTE_SWAP to be set in order to compile. drivers/mtd/maps/ixp4xx.c:57:4: error: #error CONFIG_MTD_CFI_BE_BYTE_SWAP required This patch avoids the #error output by enforcing the policy in Kconfig. Not sure if this is the right approach, but it helps doing randconfig builds. Signed-off-by: Arnd Bergmann Acked-by: Linus Walleij Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20210927141045.1597593-1-arnd@kernel.org

mtd: maps: remove dead MTD map driver for PMC-Sierra MSP boards

2021-08-17T16:43:28+00:00

Commit 1b00767fd8e1 ("MIPS: Remove PMC MSP71xx platform") removes the config PMC_MSP in ./arch/mips/Kconfig. Hence, since then, the corresponding MTD map driver for PMC-Sierra MSP boards is dead code. Remove this dead driver. Signed-off-by: Lukas Bulwahn Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20210817104531.12675-1-lukas.bulwahn@gmail.com

mtd: physmap: Add Baikal-T1 physically mapped ROM support

2020-10-02T07:08:22+00:00

Baikal-T1 Boot Controller provides an access to a RO storages, which are physically mapped into the SoC MMIO space. In particularly there are Internal ROM embedded into the SoC with a pre-installed firmware, externally attached SPI flash (also accessed in the read-only mode) and a memory region, which mirrors one of them in accordance with the currently enabled system boot mode (also called Boot ROM). This commit adds the Internal ROM support to the physmap driver of the MTD kernel subsystem. The driver will create the Internal ROM MTD as long as it is defined in the system dts file. The physically mapped SPI flash region will be used to implement the SPI-mem interface. The mirroring memory region won't be accessible directly since it's redundant due to both bootable regions being exposed anyway. Note we had to create a dedicated code for the ROMs since read from the corresponding memory regions must be done via the dword-aligned addresses. Signed-off-by: Serge Semin Cc: Alexey Malahov Cc: Pavel Parkhomenko Cc: Lee Jones Cc: linux-mips@vger.kernel.org Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20200920111445.21816-1-Sergey.Semin@baikalelectronics.ru

mtd: Replace HTTP links with HTTPS ones

2020-08-02T20:17:19+00:00

Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Acked-by: Rob Herring Signed-off-by: Richard Weinberger

mtd: physmap_of: add a hook for Intel IXP4xx flash probing

2019-10-29T13:24:53+00:00

In order to support device tree probing of IXP4xx NOR flash chips, a certain big-endian or mixed-endian memory access pattern need to be used. I have opted to use the pattern set by previous plug-ins to physmap for Gemini and Versatile, just override some functions and reuse most of the physmap core code as it is to minimize maintenance. Parts of drivers/mtd/ixp4xx.c are copied into this file. After we have IXP4xx converted fully to device tree, the drivers/mtd/ixp4xx.c file will be deleted and this will be the only access pattern to the IXP4xx flash. I did not keep the quirk in the flash write function after probe, where the old code for a while checks for access to odd addresses, fails and assigns a "faster" write function once it has convinced probe to only use 2-byte accesses. As we mandate that this device should be using bank-width = <2> this should not be a problem unless misconfigured. Signed-off-by: Linus Walleij Signed-off-by: Miquel Raynal

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

mtd: maps: Allow MTD_PHYSMAP with MTD_RAM

2019-05-06T19:47:01+00:00

When the physmap_of_core.c code was merged into physmap-core.c the ability to use MTD_PHYSMAP_OF with only MTD_RAM selected was lost. Restore this by adding MTD_RAM to the dependencies of MTD_PHYSMAP. Fixes: commit 642b1e8dbed7 ("mtd: maps: Merge physmap_of.c into physmap-core.c") Cc: Signed-off-by: Chris Packham Reviewed-by: Hamish Martin Signed-off-by: Richard Weinberger