kernel/linux.git/drivers/mtd/devices, branch v4.19.39

mtd: docg3: don't set conflicting BCH_CONST_PARAMS option

2018-11-21T08:19:19+00:00

commit be2e1c9dcf76886a83fb1c433a316e26d4ca2550 upstream. I noticed during the creation of another bugfix that the BCH_CONST_PARAMS option that is set by DOCG3 breaks setting variable parameters for any other users of the BCH library code. The only other user we have today is the MTD_NAND software BCH implementation (most flash controllers use hardware BCH these days and are not affected). I considered removing BCH_CONST_PARAMS entirely because of the inherent conflict, but according to the description in lib/bch.c there is a significant performance benefit in keeping it. To avoid the immediate problem of the conflict between MTD_NAND_BCH and DOCG3, this only sets the constant parameters if MTD_NAND_BCH is disabled, which should fix the problem for all cases that are affected. This should also work for all stable kernels. Note that there is only one machine that actually seems to use the DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have the driver disabled, but it almost certainly shows up if we wanted to test random kernels on machines that use software BCH in MTD. Fixes: d13d19ece39f ("mtd: docg3: add ECC correction code") Cc: stable@vger.kernel.org Cc: Robert Jarzmik Signed-off-by: Arnd Bergmann Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman

mtd: devices: m25p80: Make sure the buffer passed in op is DMA-able

2018-09-18T08:17:48+00:00

As documented in spi-mem.h, spi_mem_op->data.buf.{in,out} must be DMA-able, and commit 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API") failed to follow this rule as buffers passed to ->{read,write}_reg() are usually placed on the stack. Fix that by allocating a scratch buffer and copying the data around. Fixes: 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API") Reported-by: Jarkko Nikula Cc: Signed-off-by: Boris Brezillon Tested-by: Jarkko Nikula Reviewed-by: Jarkko Nikula

Merge tag 'spi-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2018-08-14T19:01:08+00:00

Pull spi updates from Mark Brown: "Quite an active release for the SPI subsystem, lots of small updates and fixes scattered about with highlights including: - 3-wire support in the GPIO driver. - support for setting a custom memory name in the memory mapped flash drivers. - support for extended mode in the Freescale DSPI controller. - support for the non-standard integration with the Microsemi Ocelot platform in the DesignWare driver. - new driver for the SocioNext UniPhier" * tag 'spi-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits) spi: davinci: fix a NULL pointer dereference spi: spi-mem: Constify spi_mem->name mtd: m25p80: Call spi_mem_get_name() to let controller set a custom name spi: spi-mem: Extend the SPI mem interface to set a custom memory name spi: spi-mem: Fix a typo in the documentation of struct spi_mem spi: uniphier: remove unnecessary include headers spi: spi-gpio: add SPI_3WIRE support spi: add flags parameter to txrx_word function pointers spi: add SPI controller driver for UniPhier SoC spi: add DT bindings for UniPhier SPI controller spi: dw: document Microsemi integration spi: img-spfi: Set device select bits for SPFI port state spi: omap2-mcspi: remove several redundant variables spi: dw-mmio: add MSCC Ocelot support spi: dw: export dw_spi_set_cs spi: spi-fsl-espi: Log fifo counters on error spi: imx: Use the longuest possible burst size when in dynamic_burst spi: imx: remove unnecessary check in spi_imx_can_dma spi: imx: Use correct number of bytes per words spi: imx: Use dynamic bursts only when bits_per_word is 8, 16 or 32 ...

Merge tag 'spi-nor/for-4.19' of git://git.infradead.org/linux-mtd into mtd/next

2018-08-11T10:19:35+00:00

Pull SPI NOR updates from Boris Brezillon: " Core changes: - Apply reset hacks only when reset is explicitly marked as broken in the DT Driver changes: - Minor cleanup/fixes in the m25p80 driver - Release flash_np in the nxp-spifi driver - Add suspend/resume hooks to the atmel-quadspi driver - Include gpio/consumer.h instead of gpio.h in the atmel-quadspi driver - Use %pK instead of %p in the stm32-quadspi driver - Improve timeout handling in the cadence-quadspi driver - Use mtd_device_register() instead of mtd_device_parse_register() in the intel-spi driver "

Merge tag 'nand/for-4.19' of git://git.infradead.org/linux-mtd into mtd/next

2018-08-11T10:15:19+00:00

Pull NAND updates from Miquel Raynal: " NAND core changes: - Add the SPI-NAND framework. - Create a helper to find the best ECC configuration. - Create NAND controller operations. - Allocate dynamically ONFI parameters structure. - Add defines for ONFI version bits. - Add manufacturer fixup for ONFI parameter page. - Add an option to specify NAND chip as a boot device. - Add Reed-Solomon error correction algorithm. - Better name for the controller structure. - Remove unused caller_is_module() definition. - Make subop helpers return unsigned values. - Expose _notsupp() helpers for raw page accessors. - Add default values for dynamic timings. - Kill the chip->scan_bbt() hook. - Rename nand_default_bbt() into nand_create_bbt(). - Start to clean the nand_chip structure. - Remove stale prototype from rawnand.h. Raw NAND controllers drivers changes: - Qcom: structuring cleanup. - Denali: use core helper to find the best ECC configuration. - Possible build of almost all drivers by adding a dependency on COMPILE_TEST for almost all of them in Kconfig, implies various fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even changes in sparc64 and ia64 architectures. - Clean the ->probe() functions error path of a lot of drivers. - Migrate all drivers to use nand_scan() instead of nand_scan_ident()/nand_scan_tail() pair. - Use mtd_device_register() where applicable to simplify the code. - Marvell: * Handle on-die ECC. * Better clocks handling. * Remove bogus comment. * Add suspend and resume support. - Tegra: add NAND controller driver. - Atmel: * Add module param to avoid using dma. * Drop Wenyou Yang from MAINTAINERS. - Denali: optimize timings handling. - FSMC: Stop using chip->read_buf(). - FSL: * Switch to SPDX license tag identifiers. * Fix qualifiers in MXC init functions. Raw NAND chip drivers changes: - Micron: * Add fixup for ONFI revision. * Update ecc_stats.corrected. * Make ECC activation stateful. * Avoid enabling/disabling ECC when it can't be disabled. * Get the actual number of bitflips. * Allow forced on-die ECC. * Support 8/512 on-die ECC. * Fix on-die ECC detection logic. - Hynix: * Fix decoding the OOB size on H27UCG8T2BTR. * Use ->exec_op() in hynix_nand_reg_write_op(). "

Merge branch 'spi-4.19' into spi-next

2018-08-10T16:51:52+00:00

mtd: m25p80: Call spi_mem_get_name() to let controller set a custom name

2018-08-02T14:35:42+00:00

By calling spi_mem_get_name(), the driver of the (Q)SPI controller can set a custom name for the memory device if necessary. This is useful to keep mtdparts compatible when controller drivers are ported from the MTD to the SPI layer. Suggested-by: Boris Brezillon Signed-off-by: Frieder Schrempf Acked-by: Boris Brezillon Signed-off-by: Mark Brown

mtd: Make Kconfig formatting consistent

2018-07-19T21:12:06+00:00

Fix indentation and replace '---help---' by 'help' to make things consistent. Signed-off-by: Boris Brezillon Reviewed-by: Miquel Raynal

mtd: sst25l: use mtd_device_register()

2018-07-18T14:32:38+00:00

This driver doesn't specify parsers so it can use that little helper. Signed-off-by: Rafał Miłecki Signed-off-by: Boris Brezillon

mtd: powernv_flash: set of_node in mtd's dev

2018-07-18T14:31:24+00:00

This enables some features implemented in mtd subsystem like reading label and partitioning info from DT. Reported-by: Timothy Pearson Signed-off-by: Rafał Miłecki Signed-off-by: Boris Brezillon