kernel/linux.git/drivers/mtd/devices, branch v4.14.85

mtd: docg3: don't set conflicting BCH_CONST_PARAMS option

2018-11-21T08:24:09+00:00

commit be2e1c9dcf76886a83fb1c433a316e26d4ca2550 upstream. I noticed during the creation of another bugfix that the BCH_CONST_PARAMS option that is set by DOCG3 breaks setting variable parameters for any other users of the BCH library code. The only other user we have today is the MTD_NAND software BCH implementation (most flash controllers use hardware BCH these days and are not affected). I considered removing BCH_CONST_PARAMS entirely because of the inherent conflict, but according to the description in lib/bch.c there is a significant performance benefit in keeping it. To avoid the immediate problem of the conflict between MTD_NAND_BCH and DOCG3, this only sets the constant parameters if MTD_NAND_BCH is disabled, which should fix the problem for all cases that are affected. This should also work for all stable kernels. Note that there is only one machine that actually seems to use the DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have the driver disabled, but it almost certainly shows up if we wanted to test random kernels on machines that use software BCH in MTD. Fixes: d13d19ece39f ("mtd: docg3: add ECC correction code") Cc: stable@vger.kernel.org Cc: Robert Jarzmik Signed-off-by: Arnd Bergmann Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman

mtd: dataflash: Use ULL suffix for 64-bit constants

2018-08-24T11:09:04+00:00

[ Upstream commit cbdceb9b3e1928554fffd0d889adf2d0d8edee4d ] With gcc 4.1.2 when compiling for 32-bit: drivers/mtd/devices/mtd_dataflash.c:736: warning: integer constant is too large for ‘long’ type drivers/mtd/devices/mtd_dataflash.c:737: warning: integer constant is too large for ‘long’ type Add the missing "ULL" suffixes to fix this. Fixes: 67e4145ebf2c161d ("mtd: dataflash: Add flash_info for AT45DB641E") Signed-off-by: Geert Uytterhoeven Acked-by: Andrey Smirnov Signed-off-by: Boris Brezillon Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mtd: Avoid probe failures when mtd->dbg.dfs_dir is invalid

2017-11-30T08:40:51+00:00

commit 1530578abdac4edce9244c7a1962ded3ffdb58ce upstream. Commit e8e3edb95ce6 ("mtd: create per-device and module-scope debugfs entries") tried to make MTD related debugfs stuff consistent across the MTD framework by creating a root /mtd/ directory containing one directory per MTD device. The problem is that, by default, the MTD layer only registers the master device if no partitions are defined for this master. This behavior breaks all drivers that expect mtd->dbg.dfs_dir to be filled correctly after calling mtd_device_register() in order to add their own debugfs entries. The only way we can force all MTD masters to be registered no matter if they expose partitions or not is by enabling the CONFIG_MTD_PARTITIONED_MASTER option. In such situations, there's no other solution but to accept skipping debugfs initialization when dbg.dfs_dir is invalid, and when this happens, inform the user that he should consider enabling CONFIG_MTD_PARTITIONED_MASTER. Fixes: e8e3edb95ce6 ("mtd: create per-device and module-scope debugfs entries") Cc: Mario J. Rugiero Signed-off-by: Boris Brezillon Reported-by: Richard Weinberger Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'nand/for-4.14' of git://git.infradead.org/l2-mtd into mtd/next

2017-09-01T13:34:30+00:00

From Boris: " This pull request contains the following core changes: * Fix memory leaks in the core * Remove unused NAND locking support * Rename nand.h into rawnand.h (preparing support for spi NANDs) * Use NAND_MAX_ID_LEN where appropriate * Fix support for 20nm Hynix chips * Fix support for Samsung and Hynix SLC NANDs and the following driver changes: * Various cleanup, improvements and fixes in the qcom driver * Fixes for bugs detected by various static code analysis tools * Fix mxc ooblayout definition * Add a new part_parsers to tmio and sharpsl platform data in order to define a custom list of partition parsers * Request the reset line in exclusive mode in the sunxi driver * Fix a build error in the orion-nand driver when compiled for ARMv4 * Allow 64-bit mvebu platforms to select the PXA3XX driver "

mtd: st_spi_fsm: Handle clk_prepare_enable/clk_disable_unprepare.

2017-08-23T14:49:20+00:00

- clk_prepare_enable() can fail here and we must check its return value. - stfsm_probe() can fail here and we must disable clock. Signed-off-by: Arvind Yadav Signed-off-by: Boris Brezillon

mtd: spear_smi: add NULL check on devm_kzalloc() return value

2017-08-15T12:00:42+00:00

Check return value from call to devm_kzalloc() in order to prevent a NULL pointer dereference. This issue was detected using Coccinelle and the following semantic patch: @@ expression x; identifier fld; @@ * x = devm_kzalloc(...); ... when != x == NULL x->fld Signed-off-by: Gustavo A. R. Silva Signed-off-by: Boris Brezillon

mtd: create per-device and module-scope debugfs entries

2017-07-21T20:25:29+00:00

Several MTD devices are using debugfs entries created in the root. This commit provides the means for a standardized subtree, creating one "mtd" entry at root, and one entry per device inside it, named after the device. The tree is registered in add_mtd_device, and released in del_mtd_device. Devices docg3, mtdswap and nandsim were updated to use this subtree instead of custom ones, and their entries were prefixed with the drivers' names. Signed-off-by: Mario J. Rugiero Acked-by: Boris Brezillon Signed-off-by: Brian Norris

Merge tag 'spi-nor/for-4.13' into MTD

2017-07-08T01:00:06+00:00

From Cyrille: """ This pull request contains the following notable changes: - introduce support to the SPI 1-2-2 and 1-4-4 protocols. - introduce support to the Double Data Rate (DDR) mode. - introduce support to the Octo SPI protocols. - add support to new memory parts for Spansion, Macronix and Winbond. - add fixes for the Aspeed, STM32 and Cadence QSPI controler drivers. - clean up the st_spi_fsm driver. """

mtd: st_spi_fsm: remove SPINOR_OP_RDSR2 and use SPINOR_OP_RDCR instead

2017-06-27T19:50:17+00:00

The 35h instruction op code has two aliases/macro definitions: - SPINOR_OP_RDCR from include/linux/mtd/spi-nor.h - SPINOR_OP_RDSR2 from drivers/mtd/devices/serial_flash_cmds.h Actually, some manufacturers name the associated internal register Status Register 2 whereas other manufacturers name it Configuration Register hence the two different macros for the very same instruction op code. Since the spi-nor.h file is the reference file for all SPI NOR instruction op codes, this patch removes the definition of the SPINOR_OP_RDSR2 macro. Also the SPINOR_OP_RDSR2 macro will be associated to another instruction op code in a further patch so we need to avoid a conflict defining this macro twice. Indeed the JESD216 rev B specification, defining the SFDP tables, also refers to the 3Eh and 3Fh instruction op codes to write/read the Status Register 2 on some SPI NOR flash memories, the 35h op code still being used to read the Configuration Register/Status Register 2 on other memories. Signed-off-by: Cyrille Pitchen Acked-by: Marek Vasut