kernel/linux.git/drivers/mtd/devices/mtd_dataflash.c, branch v4.19.112

mtd: dataflash: Use ULL suffix for 64-bit constants

2018-06-22T08:32:28+00:00

With gcc 4.1.2 when compiling for 32-bit: drivers/mtd/devices/mtd_dataflash.c:736: warning: integer constant is too large for ‘long’ type drivers/mtd/devices/mtd_dataflash.c:737: warning: integer constant is too large for ‘long’ type Add the missing "ULL" suffixes to fix this. Fixes: 67e4145ebf2c161d ("mtd: dataflash: Add flash_info for AT45DB641E") Signed-off-by: Geert Uytterhoeven Acked-by: Andrey Smirnov Signed-off-by: Boris Brezillon

mtd: dataflash: replace msleep with usleep_range

2018-04-22T18:02:17+00:00

Since msleep is based on jiffies, this 3 ms sleep becomes actually 20 ms. Worst of all, since this sleep is used in a loop when writing, a single page write (256 to 1024 bytes) causes 17 ms extra time. When writing large files (for example u-boot is usually 512 KB) this delay adds up to minutes. See Documentation/timers/timers-howto.txt "Why not msleep for (1ms - 20ms)". Signed-off-by: Luca Ellero Signed-off-by: Boris Brezillon

mtd: Stop updating erase_info->state and calling mtd_erase_callback()

2018-03-21T08:50:56+00:00

MTD users are no longer checking erase_info->state to determine if the erase operation failed or succeeded. Moreover, mtd_erase_callback() is now a NOP. We can safely get rid of all mtd_erase_callback() calls and all erase_info->state assignments. While at it, get rid of the erase_info->state field, all MTD_ERASE_XXX definitions and the mtd_erase_callback() function. Signed-off-by: Boris Brezillon Reviewed-by: Richard Weinberger Reviewed-by: Miquel Raynal Acked-by: Bert Kenward --- Changes in v2: - Address a few coding style issues (reported by Miquel) - Remove comments that are no longer valid (reported by Miquel)

mtd: dataflash: Add flash_info for AT45DB641E

2017-05-11T17:04:52+00:00

Cc: cphealy@gmail.com Cc: David Woodhouse Cc: Brian Norris Cc: Boris Brezillon Cc: Marek Vasut Cc: Richard Weinberger Cc: Cyrille Pitchen Cc: linux-kernel@vger.kernel.org Acked-by: Marek Vasut Tested-by: Chris Healy Signed-off-by: Andrey Smirnov Signed-off-by: Brian Norris

mtd: dataflash: Make use of "extened device information"

2017-05-11T17:04:45+00:00

In anticipation of supporting chips that need it, extend the size of struct flash_info's 'jedec_id' field to make room 2 byte of extended device information as well as add code to fetch this data during jedec_probe(). Cc: cphealy@gmail.com Cc: David Woodhouse Cc: Brian Norris Cc: Boris Brezillon Cc: Marek Vasut Cc: Richard Weinberger Cc: Cyrille Pitchen Cc: linux-kernel@vger.kernel.org Acked-by: Marek Vasut Tested-by: Chris Healy Signed-off-by: Andrey Smirnov Signed-off-by: Brian Norris

mtd: dataflash: Get rid of loop counter in jedec_probe()

2017-05-11T17:04:39+00:00

"For" loop in jedec_probe can be simplified to not need counter 'i'. Convert the code and get rid of the variable. Cc: cphealy@gmail.com Cc: David Woodhouse Cc: Brian Norris Cc: Boris Brezillon Cc: Marek Vasut Cc: Richard Weinberger Cc: Cyrille Pitchen Cc: linux-kernel@vger.kernel.org Reviewed-by: Marek Vasut Tested-by: Chris Healy Signed-off-by: Andrey Smirnov Signed-off-by: Brian Norris

mtd: dataflash: Replace pr_debug, printk with dev_* functions

2017-05-11T17:04:32+00:00

Lion's share of calls to pr_debug in this driver follow the pattern of pr_debug("%s ", dev_name(), ), which should be semantically identical to dev_dbg(, "", ), so replace such occurencies to simplify the code. Convert the small minority of pr_debug that do not follow pattern from above to use dev_dbg as well, for the sake of consistency. Convert similar patter of printk(KERN_ERR, "%s: ...", dev_name(...), ...) to use dev_err instead. No functional change intended. Cc: cphealy@gmail.com Cc: David Woodhouse Cc: Brian Norris Cc: Boris Brezillon Cc: Marek Vasut Cc: Richard Weinberger Cc: Cyrille Pitchen Cc: linux-kernel@vger.kernel.org Reviewed-by: Marek Vasut Tested-by: Chris Healy Signed-off-by: Andrey Smirnov Signed-off-by: Brian Norris

mtd: dataflash: Improve coding style in jedec_probe()

2017-05-11T17:04:19+00:00

Change the following: - Replace indentation between type and name of local variable from tabs to spaces - Replace magic number 0x1F with CFI_MFR_ATMEL macro - Replace variable 'tmp' with 'ret' and 'i' where appropriate - Reformat multi-line comments and add newlines where appropriate No functional change intended. Cc: cphealy@gmail.com Cc: David Woodhouse Cc: Brian Norris Cc: Boris Brezillon Cc: Richard Weinberger Cc: Cyrille Pitchen Cc: Marek Vasut Cc: linux-kernel@vger.kernel.org Acked-by: Marek Vasut Tested-by: Chris Healy Signed-off-by: Andrey Smirnov Signed-off-by: Brian Norris

mtd: dataflash: Replace C99 types with their kernel counterparts

2017-05-11T17:04:14+00:00

No functional change intended. Cc: cphealy@gmail.com Cc: David Woodhouse Cc: Brian Norris Cc: Boris Brezillon Cc: Marek Vasut Cc: Richard Weinberger Cc: Cyrille Pitchen Cc: linux-kernel@vger.kernel.org Acked-by: Marek Vasut Signed-off-by: Andrey Smirnov Tested-by: Chris Healy Signed-off-by: Brian Norris

Merge v4.4-rc1 into MTD development

2015-11-16T04:31:29+00:00

Sync up with the upstream development. Signed-off-by: Brian Norris