kernel/linux.git/drivers/mtd/chips, branch v4.19.77

mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword()

2019-10-01T06:26:02+00:00

commit 37c673ade35c707d50583b5b25091ff8ebdeafd7 upstream. As reported by the OpenWRT team, write requests sometimes fail on some platforms. Currently to check the state chip_ready() is used correctly as described by the flash memory S29GL256P11TFI01 datasheet. Also chip_good() is used to check if the write is succeeded and it was implemented by the commit fb4a90bfcd6d8 ("[MTD] CFI-0002 - Improve error checking"). But actually the write failure is caused on some platforms and also it can be fixed by using chip_good() to check the state and retry instead. Also it seems that it is caused after repeated about 1,000 times to retry the write one word with the reset command. By using chip_good() to check the state to be done it can be reduced the retry with reset. It is depended on the actual flash chip behavior so the root cause is unknown. Cc: Chris Packham Cc: Joakim Tjernlund Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Reported-by: Fabio Bettoni Signed-off-by: Felix Fietkau Signed-off-by: Hauke Mehrtens Signed-off-by: Tokunori Ikegami [vigneshr@ti.com: Fix a checkpatch warning] Signed-off-by: Vignesh Raghavendra Signed-off-by: Greg Kroah-Hartman

Merge tag 'nand/for-4.19' of git://git.infradead.org/linux-mtd into mtd/next

2018-08-11T10:15:19+00:00

Pull NAND updates from Miquel Raynal: " NAND core changes: - Add the SPI-NAND framework. - Create a helper to find the best ECC configuration. - Create NAND controller operations. - Allocate dynamically ONFI parameters structure. - Add defines for ONFI version bits. - Add manufacturer fixup for ONFI parameter page. - Add an option to specify NAND chip as a boot device. - Add Reed-Solomon error correction algorithm. - Better name for the controller structure. - Remove unused caller_is_module() definition. - Make subop helpers return unsigned values. - Expose _notsupp() helpers for raw page accessors. - Add default values for dynamic timings. - Kill the chip->scan_bbt() hook. - Rename nand_default_bbt() into nand_create_bbt(). - Start to clean the nand_chip structure. - Remove stale prototype from rawnand.h. Raw NAND controllers drivers changes: - Qcom: structuring cleanup. - Denali: use core helper to find the best ECC configuration. - Possible build of almost all drivers by adding a dependency on COMPILE_TEST for almost all of them in Kconfig, implies various fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even changes in sparc64 and ia64 architectures. - Clean the ->probe() functions error path of a lot of drivers. - Migrate all drivers to use nand_scan() instead of nand_scan_ident()/nand_scan_tail() pair. - Use mtd_device_register() where applicable to simplify the code. - Marvell: * Handle on-die ECC. * Better clocks handling. * Remove bogus comment. * Add suspend and resume support. - Tegra: add NAND controller driver. - Atmel: * Add module param to avoid using dma. * Drop Wenyou Yang from MAINTAINERS. - Denali: optimize timings handling. - FSMC: Stop using chip->read_buf(). - FSL: * Switch to SPDX license tag identifiers. * Fix qualifiers in MXC init functions. Raw NAND chip drivers changes: - Micron: * Add fixup for ONFI revision. * Update ecc_stats.corrected. * Make ECC activation stateful. * Avoid enabling/disabling ECC when it can't be disabled. * Get the actual number of bitflips. * Allow forced on-die ECC. * Support 8/512 on-die ECC. * Fix on-die ECC detection logic. - Hynix: * Fix decoding the OOB size on H27UCG8T2BTR. * Use ->exec_op() in hynix_nand_reg_write_op(). "

mtd: Make Kconfig formatting consistent

2018-07-19T21:12:06+00:00

Fix indentation and replace '---help---' by 'help' to make things consistent. Signed-off-by: Boris Brezillon Reviewed-by: Miquel Raynal

mtd: cfi: cmdset_0002: remove redundant variable timeo

2018-07-07T08:53:51+00:00

Variable is_local is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'timeo' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King Signed-off-by: Boris Brezillon

mtd: Use kasprintf() instead of fixed buffer formatting

2018-07-07T08:53:45+00:00

Using "%4.4X" in the calculation of the buffer size is misleading, as the format string literal has no relation to the actual size needed. Hence this is fragile w.r.t. future modification. As this is not a hot path, fix this by replacing the formatting in a fixed buffer by kasprintf(). Signed-off-by: Geert Uytterhoeven Signed-off-by: Boris Brezillon

mtd: replace VMLINUX_SYMBOL_STR() with string literal

2018-06-24T20:13:34+00:00

With the special case handling for Blackfin and Metag was removed by commit 94e58e0ac312 ("export.h: remove code for prefixing symbols with underscore"), VMLINUX_SYMBOL_STR() can be replaced with string literal. Signed-off-by: Masahiro Yamada Signed-off-by: Boris Brezillon

mtd: cfi_cmdset_0002: Avoid walking all chips when unlocking.

2018-06-22T08:29:16+00:00

cfi_ppb_unlock() walks all flash chips when unlocking sectors, avoid walking chips unaffected by the unlock operation. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund Signed-off-by: Boris Brezillon

mtd: cfi_cmdset_0002: Fix unlocking requests crossing a chip boudary

2018-06-21T22:55:16+00:00

The "sector is in requested range" test used to determine whether sectors should be re-locked or not is done on a variable that is reset everytime we cross a chip boundary, which can lead to some blocks being re-locked while the caller expect them to be unlocked. Fix the check to make sure this cannot happen. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund Signed-off-by: Boris Brezillon

mtd: cfi_cmdset_0002: fix SEGV unlocking multiple chips

2018-06-21T22:35:31+00:00

cfi_ppb_unlock() tries to relock all sectors that were locked before unlocking the whole chip. This locking used the chip start address + the FULL offset from the first flash chip, thereby forming an illegal address. Fix that by using the chip offset(adr). Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund Signed-off-by: Boris Brezillon

mtd: cfi_cmdset_0002: Use right chip in do_ppb_xxlock()

2018-06-21T22:35:11+00:00

do_ppb_xxlock() fails to add chip->start when querying for lock status (and chip_ready test), which caused false status reports. Fix that by adding adr += chip->start and adjust call sites accordingly. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund Signed-off-by: Boris Brezillon