kernel/linux.git/drivers/mmc, branch v6.1.176

mmc: sdhci: add signal voltage switch in sdhci_resume_host

2026-06-19T11:37:16+00:00

commit f595e8e77a51eee35e331f69321766593a845ef2 upstream. I met one suspend/resume issue with sdr104 capable sdio wifi card (with "keep-power-in-suspend" set in DT property): After resuming from suspend to ram, the sdio wifi card stops working. Further debug shows that although ios shows the sdio card is at sdr104 mode, the voltage is still at 3V3. This is due to missing the calling of ->start_signal_voltage_switch() in sdhci_resume_host(). Fix this issue by adding ->start_signal_voltage_switch() in sdhci_resume_host(). This also matches what we do for sdhci_runtime_resume_host(). Then the question is: why this issue hasn't reported and fixed for so long time. IMHO, several reasons: Some host controllers just kick off the runtime resume for system resume, so they benefit from the well supported runtime pm code; Some platforms just use the old sdio wifi card which doesn't need signal voltage switch at all, the default voltage is 3v3 after resuming. Fixes: 6308d2905bd3 ("mmc: sdhci: add quirk for keeping card power during suspend") Signed-off-by: Jisheng Zhang Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: renesas_sdhi: Add OF entry for RZ/G2H SoC

2026-06-19T11:37:16+00:00

commit f48ee49726ee4ab545fd2dc644f169c0809b19b3 upstream. The RZ/G2H (R8A774E1) SoC was previously handled via the generic "renesas,rcar-gen3-sdhi" fallback compatible string. However, because the SDHI IP on RZ/G2H is identical with the R-Car H3-N (R8A77951), it requires the specific quirks and configuration defined in `of_r8a7795_compatible` rather than the generic Gen3 data. Add the explicit "renesas,sdhi-r8a774e1" match entry to map it correctly. Note that the DT binding file renesas,sdhi.yaml does not need an update as the entry for this SoC is already present. Fixes: 31941342888d ("arm64: dts: renesas: r8a774e1: Add SDHI nodes") Cc: stable@vger.kernel.org Signed-off-by: Lad Prabhakar Reviewed-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: litex_mmc: Set mandatory idle clocks before CMD0

2026-06-19T11:37:16+00:00

commit 99982b743e5ba72bd1f5de0e03e3b96ae70b1e51 upstream. The litex_mmc driver assumes the card is already probed in the BIOS and skip the phy initialization. This will cause the command fail like the following when the old card is unplugged and then insert a new card: [ 62.923593] litex-mmc f0004000.mmc: Command (cmd 8) error, status -110 [ 62.949717] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110 [ 62.976606] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110 [ 63.002516] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110 [ 63.028442] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110 Add required clock settings and initialization for the CMD 0, so it can probe the new card. Fixes: 92e099104729 ("mmc: Add driver for LiteX's LiteSDCard interface") Signed-off-by: Inochi Amaoto Reviewed-by: Gabriel Somlo Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: core: Fix host controller programming for fixed driver type

2026-06-19T11:37:16+00:00

commit 5a52c5701a67d5176eb1afbf1bdaf7d6dfeec597 upstream. When using the fixed-emmc-driver-type device tree property, the MMC core correctly selects the driver strength for the card but fails to program the host controller accordingly. This causes a mismatch where the card uses the specified driver type while the host controller defaults to Type B (since ios->drv_type remains zero). Split the driver type programming logic to handle both fixed and dynamic driver type selection paths. For fixed driver types, program the host controller with the selected drive_strength value. For dynamic selection, use the existing drv_type as before. This ensures both the eMMC device and host controller use matching driver strengths, preventing potential signal integrity issues. Fixes: 6186d06c519e ("mmc: parse new binding for eMMC fixed driver type") Signed-off-by: Kamal Dasu Reviewed-by: Shawn Lin Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: litex_mmc: Use DIV_ROUND_UP for more accurate clock calculation

2026-06-19T11:37:13+00:00

commit b837e38c255dd9f8b53511d52e87f1fda32b3dfe upstream. The previous clock uses roundup_pow_of_two() to calculate the core clock frequency. It does not meet the actual hardware meaning. The actual frequency is calculated by "ref_clk / ((div >> 1) << 1)". Fix the clock divider calculation. Fixes: 92e099104729 ("mmc: Add driver for LiteX's LiteSDCard interface") Signed-off-by: Inochi Amaoto Reviewed-by: Gabriel Somlo Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-of-dwcmshc: Disable clock before DLL configuration

2026-06-01T15:38:48+00:00

commit 6546a49bbe656981d99a389195560999058c89c4 upstream. According to the ASIC design recommendations, the clock must be disabled before operating the DLL to prevent glitches that could affect the internal digital logic. In extreme cases, failing to do so may cause the controller to malfunction completely. Adds a step to disable the clock before DLL configuration and re-enables it at the end. Fixes: 08f3dff799d4 ("mmc: sdhci-of-dwcmshc: add rockchip platform support") Cc: stable@vger.kernel.org Signed-off-by: Shawn Lin Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: block: use single block write in retry

2026-06-01T15:38:48+00:00

commit c7c6d4f5103864f73ee3a78bfd6da241f84197dd upstream. Due to errata i2493[0], multi-block write would still fail in retries. With i2493, the MMC interface has the potential of write failures when issuing multi-block writes operating in HS200 mode with excessive IO supply noise. While the errata provides guidance in hardware design and layout to minimize the IO supply noise, in theory the write failure cannot be resolved in hardware. The software solution to ensure the data integrity is to add minimum 5us delay between block writes. Single-block write is the practical way to introduce the delay. This patch reuses recovery_mode flag, and switches to single-block write in retry when multi-block write fails. It covers both CQE and non-CQE cases. [0] https://www.ti.com/lit/pdf/sprz582 Cc: stable@vger.kernel.org Suggested-by: Jens Axboe Signed-off-by: Bin Liu Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: vub300: fix NULL-deref on disconnect

2026-04-18T08:35:58+00:00

commit dff34ef879c5e73298443956a8b391311ba78d57 upstream. Make sure to deregister the controller before dropping the reference to the driver data on disconnect to avoid NULL-pointer dereferences or use-after-free. Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Johan Hovold Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: fix timing selection for 1-bit bus width

2026-03-25T10:03:12+00:00

commit 5e3486e64094c28a526543f1e8aa0d5964b7f02d upstream. When 1-bit bus width is used with HS200/HS400 capabilities set, mmc_select_hs200() returns 0 without actually switching. This causes mmc_select_timing() to skip mmc_select_hs(), leaving eMMC in legacy mode (26MHz) instead of High Speed SDR (52MHz). Per JEDEC eMMC spec section 5.3.2, 1-bit mode supports High Speed SDR. Drop incompatible HS200/HS400/UHS/DDR caps early so timing selection falls through to mmc_select_hs() correctly. Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure") Signed-off-by: Luke Wang Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-pci-gli: fix GL9750 DMA write corruption

2026-03-25T10:03:12+00:00

commit 2b76e0cc7803e5ab561c875edaba7f6bbd87fbb0 upstream. The GL9750 SD host controller has intermittent data corruption during DMA write operations. The GM_BURST register's R_OSRC_Lmt field (bits 17:16), which limits outstanding DMA read requests from system memory, is not being cleared during initialization. The Windows driver sets R_OSRC_Lmt to zero, limiting requests to the smallest unit. Clear R_OSRC_Lmt to match the Windows driver behavior. This eliminates write corruption verified with f3write/f3read tests while maintaining DMA performance. Cc: stable@vger.kernel.org Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support") Closes: https://lore.kernel.org/linux-mmc/33d12807-5c72-41ce-8679-57aa11831fad@linux.dev/ Acked-by: Adrian Hunter Signed-off-by: Matthew Schwartz Reviewed-by: Ben Chuang Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman