kernel/linux.git/drivers/mmc, branch v5.4.50

mmc: sdhci-esdhc-imx: fix the mask for tuning start point

2020-06-22T07:31:10+00:00

[ Upstream commit 1194be8c949b8190b2882ad8335a5d98aa50c735 ] According the RM, the bit[6~0] of register ESDHC_TUNING_CTRL is TUNING_START_TAP, bit[7] of this register is to disable the command CRC check for standard tuning. So fix it here. Fixes: d87fc9663688 ("mmc: sdhci-esdhc-imx: support setting tuning start point") Signed-off-by: Haibo Chen Link: https://lore.kernel.org/r/1590488522-9292-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: via-sdmmc: Respect the cmd->busy_timeout from the mmc core

2020-06-22T07:31:09+00:00

[ Upstream commit 966244ccd2919e28f25555a77f204cd1c109cad8 ] Using a fixed 1s timeout for all commands (and data transfers) is a bit problematic. For some commands it means waiting longer than needed for the timer to expire, which may not a big issue, but still. For other commands, like for an erase (CMD38) that uses a R1B response, may require longer timeouts than 1s. In these cases, we may end up treating the command as it failed, while it just needed some more time to complete successfully. Fix the problem by respecting the cmd->busy_timeout, which is provided by the mmc core. Cc: Bruce Chang Cc: Harald Welte Signed-off-by: Ulf Hansson Link: https://lore.kernel.org/r/20200414161413.3036-17-ulf.hansson@linaro.org Signed-off-by: Sasha Levin

mmc: sdhci-msm: Set SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 quirk

2020-06-22T07:31:09+00:00

[ Upstream commit d863cb03fb2aac07f017b2a1d923cdbc35021280 ] sdhci-msm can support auto cmd12. So enable SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 quirk. Signed-off-by: Veerabhadrarao Badiganti Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/1587363626-20413-3-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: meson-mx-sdio: trigger a soft reset after a timeout or CRC error

2020-06-22T07:30:56+00:00

[ Upstream commit 91995b904ec2e44b5c159ac6a5d3f154345a4de7 ] The vendor driver (from the 3.10 kernel) triggers a soft reset every time before starting a new command. While this fixes a problem where SDIO cards are not detected at all (because all commands simply timed out) this hurts SD card read performance a bit (in my tests between 10% to 20%). Trigger a soft reset after we got a CRC error or if the previous command timed out (just like the vendor driver from the same 3.10 kernel for the newer SDHC controller IP does). This fixes detection of SDIO cards and doesn't hurt SD card read performance at the same time. With this patch the initialization of an RTL8723BS SDIO card looks like this: req done (CMD52): -110: 00000000 00000000 00000000 00000000 clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 1 timing 0 starting CMD0 arg 00000000 flags 000000c0 req done (CMD0): 0: 00000000 00000000 00000000 00000000 clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 0 starting CMD8 arg 000001aa flags 000002f5 req done (CMD8): -110: 00000000 00000000 00000000 00000000 starting CMD5 arg 00000000 flags 000002e1 req done (CMD5): 0: 90ff0000 00000000 00000000 00000000 starting CMD5 arg 00200000 flags 000002e1 req done (CMD5): 0: 90ff0000 00000000 00000000 00000000 starting CMD3 arg 00000000 flags 00000075 req done (CMD3): 0: 00010000 00000000 00000000 00000000 starting CMD7 arg 00010000 flags 00000015 req done (CMD7): 0: 00001e00 00000000 00000000 00000000 starting CMD52 arg 00000000 flags 00000195 req done (CMD52): 0: 00001032 00000000 00000000 00000000 [... more CMD52 omitted ...] clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2 clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2 starting CMD52 arg 00000e00 flags 00000195 req done (CMD52): 0: 00001000 00000000 00000000 00000000 starting CMD52 arg 80000e02 flags 00000195 req done (CMD52): 0: 00001002 00000000 00000000 00000000 clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 4 timing 2 starting CMD52 arg 00020000 flags 00000195 req done (CMD52): 0: 00001007 00000000 00000000 00000000 [... more CMD52 omitted ...] new high speed SDIO card at address 0001 Fixes: ed80a13bb4c4c9 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs") Signed-off-by: Martin Blumenstingl Link: https://lore.kernel.org/r/20200503222805.2668941-1-martin.blumenstingl@googlemail.com Tested-by: Tobias Baumann <017623705678@o2online.de> Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdio: Fix several potential memory leaks in mmc_sdio_init_card()

2020-06-17T14:40:38+00:00

commit a94a59f43749b4f8cd81b8be87c95f9ef898d19d upstream. Over the years, the code in mmc_sdio_init_card() has grown to become quite messy. Unfortunate this has also lead to that several paths are leaking memory in form of an allocated struct mmc_card, which includes additional data, such as initialized struct device for example. Unfortunate, it's a too complex task find each offending commit. Therefore, this change fixes all memory leaks at once. Cc: Signed-off-by: Ulf Hansson Link: https://lore.kernel.org/r/20200430091640.455-3-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman

mmc: sdio: Fix potential NULL pointer error in mmc_sdio_init_card()

2020-06-17T14:40:37+00:00

commit f04086c225da11ad16d7f9a2fbca6483ab16dded upstream. During some scenarios mmc_sdio_init_card() runs a retry path for the UHS-I specific initialization, which leads to removal of the previously allocated card. A new card is then re-allocated while retrying. However, in one of the corresponding error paths we may end up to remove an already removed card, which likely leads to a NULL pointer exception. So, let's fix this. Fixes: 5fc3d80ef496 ("mmc: sdio: don't use rocr to check if the card could support UHS mode") Cc: Signed-off-by: Ulf Hansson Link: https://lore.kernel.org/r/20200430091640.455-2-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman

mmc: uniphier-sd: call devm_request_irq() after tmio_mmc_host_probe()

2020-06-17T14:40:37+00:00

commit 5d1f42e14b135773c0cc1d82e904c5b223783a9d upstream. Currently, tmio_mmc_irq() handler is registered before the host is fully initialized by tmio_mmc_host_probe(). I did not previously notice this problem. The boot ROM of a new Socionext SoC unmasks interrupts (CTL_IRQ_MASK) somehow. The handler is invoked before tmio_mmc_host_probe(), then emits noisy call trace. Move devm_request_irq() below tmio_mmc_host_probe(). Fixes: 3fd784f745dd ("mmc: uniphier-sd: add UniPhier SD/eMMC controller driver") Signed-off-by: Masahiro Yamada Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200511062158.1790924-1-yamada.masahiro@socionext.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: tmio: Further fixup runtime PM management at remove

2020-06-17T14:40:37+00:00

commit 4bd784411aca022622e484eb262f5a0540ae732c upstream. Before calling tmio_mmc_host_probe(), the caller is required to enable clocks for its device, as to make it accessible when reading/writing registers during probe. Therefore, the responsibility to disable these clocks, in the error path of ->probe() and during ->remove(), is better managed outside tmio_mmc_host_remove(). As a matter of fact, callers of tmio_mmc_host_remove() already expects this to be the behaviour. However, there's a problem with tmio_mmc_host_remove() when the Kconfig option, CONFIG_PM, is set. More precisely, tmio_mmc_host_remove() may then disable the clock via runtime PM, which leads to clock enable/disable imbalance problems, when the caller of tmio_mmc_host_remove() also tries to disable the same clocks. To solve the problem, let's make sure tmio_mmc_host_remove() leaves the device with clocks enabled, but also make sure to disable the IRQs, as we normally do at ->runtime_suspend(). Reported-by: Geert Uytterhoeven Reviewed-by: Wolfram Sang Tested-by: Wolfram Sang Signed-off-by: Ulf Hansson Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200519152434.6867-1-ulf.hansson@linaro.org Tested-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman

mmc: mmci_sdmmc: fix DMA API warning overlapping mappings

2020-06-17T14:40:37+00:00

commit fe8d33bd33d527dee3155d2bccd714a655f37334 upstream. Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning: WARNING: CPU: 1 PID: 20 at kernel/dma/debug.c:500 add_dma_entry+0x16c/0x17c DMA-API: exceeded 7 overlapping mappings of cacheline 0x031d2645 Modules linked in: CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted 5.5.0-rc2-00021-gdeda30999c2b-dirty #49 Hardware name: STM32 (Device Tree Support) Workqueue: events_freezable mmc_rescan [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0xc0/0xd4) [] (dump_stack) from [] (__warn+0xd0/0xf8) [] (__warn) from [] (warn_slowpath_fmt+0x94/0xb8) [] (warn_slowpath_fmt) from [] (add_dma_entry+0x16c/0x17c) [] (add_dma_entry) from [] (debug_dma_map_sg+0xe4/0x3d4) [] (debug_dma_map_sg) from [] (sdmmc_idma_prep_data+0x94/0xf8) [] (sdmmc_idma_prep_data) from [] (mmci_prep_data+0x2c/0xb0) [] (mmci_prep_data) from [] (mmci_start_data+0x134/0x2f0) [] (mmci_start_data) from [] (mmci_request+0xe8/0x154) [] (mmci_request) from [] (mmc_start_request+0x94/0xbc) DMA api debug brings to light leaking dma-mappings, dma_map_sg and dma_unmap_sg are not correctly balanced. If a request is prepared, the dma_map/unmap are done in asynchronous call pre_req (prep_data) and post_req (unprep_data). In this case the dma-mapping is right balanced. But if the request was not prepared, the data->host_cookie is define to zero and the dma_map/unmap must be done in the request. The dma_map is called by mmci_dma_start (prep_data), but there is no dma_unmap in this case. This patch adds dma_unmap_sg when the dma is finalized and the data cookie is zero (request not prepared). Signed-off-by: Ludovic Barre Link: https://lore.kernel.org/r/20200526155103.12514-2-ludovic.barre@st.com Fixes: 46b723dd867d ("mmc: mmci: add stm32 sdmmc variant") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-msm: Clear tuning done flag while hs400 tuning

2020-06-17T14:40:37+00:00

commit 9253d71011c349d5f5cc0cebdf68b4a80811b92d upstream. Clear tuning_done flag while executing tuning to ensure vendor specific HS400 settings are applied properly when the controller is re-initialized in HS400 mode. Without this, re-initialization of the qcom SDHC in HS400 mode fails while resuming the driver from runtime-suspend or system-suspend. Fixes: ff06ce417828 ("mmc: sdhci-msm: Add HS400 platform support") Cc: stable@vger.kernel.org Signed-off-by: Veerabhadrarao Badiganti Link: https://lore.kernel.org/r/1590678838-18099-1-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman