kernel/linux.git/drivers/mmc, branch v5.15.7

mmc: sdhci: Fix ADMA for PAGE_SIZE >= 64KiB

2021-12-01T08:04:43+00:00

commit 3d7c194b7c9ad414264935ad4f943a6ce285ebb1 upstream. The block layer forces a minimum segment size of PAGE_SIZE, so a segment can be too big for the ADMA table, if PAGE_SIZE >= 64KiB. Fix by writing multiple descriptors, noting that the ADMA table is sized for 4KiB chunks anyway, so it will be big enough. Reported-and-tested-by: Bough Chen Signed-off-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211115082345.802238-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-esdhc-imx: disable CMDQ support

2021-12-01T08:04:43+00:00

commit adab993c25191b839b415781bdc7173a77315240 upstream. On IMX SoC's which support CMDQ the following can occur during high a high cpu load: mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000 mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 mmc2: cqhci: TDL base: 0x8003f000 | TDL up32: 0x00000000 mmc2: cqhci: Doorbell: 0xbf01dfff | TCN: 0x00000000 mmc2: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x08000000 mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000800 mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 mmc2: cqhci: Resp idx: 0x0000000d | Resp arg: 0x00000000 mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== mmc2: sdhci: Sys addr: 0x7c722000 | Version: 0x00000002 mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000020 mmc2: sdhci: Argument: 0x00018000 | Trn mode: 0x00000023 mmc2: sdhci: Present: 0x01f88008 | Host ctl: 0x00000030 mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000502 mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 mmc2: sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0xffc003ff mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d07f01 mmc2: sdhci: Host ctl2: 0x00000088 mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0xfe179020 mmc2: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS DUMP ==== mmc2: sdhci-esdhc-imx: cmd debug status: 0x2120 mmc2: sdhci-esdhc-imx: data debug status: 0x2200 mmc2: sdhci-esdhc-imx: trans debug status: 0x2300 mmc2: sdhci-esdhc-imx: dma debug status: 0x2400 mmc2: sdhci-esdhc-imx: adma debug status: 0x2510 mmc2: sdhci-esdhc-imx: fifo debug status: 0x2680 mmc2: sdhci-esdhc-imx: async fifo debug status: 0x2750 mmc2: sdhci: ============================================ For now, disable CMDQ support on the imx8qm/imx8qxp/imx8mm until the issue is found and resolved. Fixes: bb6e358169bf6 ("mmc: sdhci-esdhc-imx: add CMDQ support") Fixes: cde5e8e9ff146 ("mmc: sdhci-esdhc-imx: Add an new esdhc_soc_data for i.MX8MM") Cc: stable@vger.kernel.org Signed-off-by: Tim Harvey Reviewed-by: Haibo Chen Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20211103165415.2016-1-tharvey@gateworks.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: moxart: Fix null pointer dereference on pointer host

2021-11-18T18:17:20+00:00

commit 0eab756f8821d255016c63bb55804c429ff4bdb1 upstream. There are several error return paths that dereference the null pointer host because the pointer has not yet been set to a valid value. Fix this by adding a new out_mmc label and exiting via this label to avoid the host clean up and hence the null pointer dereference. Addresses-Coverity: ("Explicit null dereference") Fixes: 8105c2abbf36 ("mmc: moxart: Fix reference count leaks in moxart_probe") Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20211013100052.125461-1-colin.king@canonical.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: mxs-mmc: disable regulator on error and in the remove function

2021-11-18T18:16:34+00:00

[ Upstream commit ce5f6c2c9b0fcb4094f8e162cfd37fb4294204f7 ] The 'reg_vmmc' regulator is enabled in the probe. It is never disabled. Neither in the error handling path of the probe nor in the remove function. Register a devm_action to disable it when needed. Fixes: 4dc5a79f1350 ("mmc: mxs-mmc: enable regulator for mmc slot") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/4aadb3c97835f7b80f00819c3d549e6130384e67.1634365151.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci-omap: Fix context restore

2021-11-18T18:16:31+00:00

[ Upstream commit d806e334d0390502cd2a820ad33d65d7f9bba618 ] We need to restore context in a specified order with HCTL set in two phases. This is similar to what omap_hsmmc_context_restore() is doing. Otherwise SDIO can stop working on resume. And for PM runtime and SDIO cards, we need to also save SYSCTL, IE and ISE. This should not be a problem currently, and these patches can be applied whenever suitable. Fixes: ee0f309263a6 ("mmc: sdhci-omap: Add Support for Suspend/Resume") Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20210921110029.21944-3-tony@atomide.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci-omap: Fix NULL pointer exception if regulator is not configured

2021-11-18T18:16:31+00:00

[ Upstream commit 8e0e7bd38b1ec7f9e5d18725ad41828be4e09859 ] If sdhci-omap is configured for an unused device instance and the device is not set as disabled, we can get a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 00000045 ... (regulator_set_voltage) from [] (mmc_regulator_set_ocr+0x44/0xd0) (mmc_regulator_set_ocr) from [] (sdhci_set_ios+0xa4/0x490) (sdhci_set_ios) from [] (sdhci_omap_set_ios+0x124/0x160) (sdhci_omap_set_ios) from [] (mmc_power_up.part.0+0x3c/0x154) (mmc_power_up.part.0) from [] (mmc_start_host+0x88/0x9c) (mmc_start_host) from [] (mmc_add_host+0x58/0x7c) (mmc_add_host) from [] (__sdhci_add_host+0xf0/0x22c) (__sdhci_add_host) from [] (sdhci_omap_probe+0x318/0x72c) (sdhci_omap_probe) from [] (platform_probe+0x58/0xb8) AFAIK we are not seeing this with the devices configured in the mainline kernel but this can cause issues for folks bringing up their boards. Fixes: 7d326930d352 ("mmc: sdhci-omap: Add OMAP SDHCI driver") Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20210921110029.21944-2-tony@atomide.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: moxart: Fix reference count leaks in moxart_probe

2021-11-18T18:16:15+00:00

[ Upstream commit 8105c2abbf36296bf38ca44f55ee45d160db476a ] The issue happens in several error handling paths on two refcounted object related to the object "host" (dma_chan_rx, dma_chan_tx). In these paths, the function forgets to decrement one or both objects' reference count increased earlier by dma_request_chan(), causing reference count leaks. Fix it by balancing the refcounts of both objects in some error handling paths. In correspondence with the changes in moxart_probe(), IS_ERR() is replaced with IS_ERR_OR_NULL() in moxart_remove() as well. Signed-off-by: Xin Xiong Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Link: https://lore.kernel.org/r/20211009041918.28419-1-xiongx18@fudan.edu.cn Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: dw_mmc: Dont wait for DRTO on Write RSP error

2021-11-18T18:15:52+00:00

commit 43592c8736e84025d7a45e61a46c3fa40536a364 upstream. Only wait for DRTO on reads, otherwise the driver hangs. The driver prevents sending CMD12 on response errors like CRCs. According to the comment this is because some cards have problems with this during the UHS tuning sequence. Unfortunately this workaround currently also applies for any command with data. On reads this will set the drto timer, which then triggers after a while. On writes this will not set any timer and the tasklet will not be scheduled again. I cannot test for the UHS workarounds need, but even if so, it should at most apply to reads. I have observed many hangs when CMD25 response contained a CRC error. This patch fixes this without touching the actual UHS tuning workaround. Signed-off-by: Christian Loehle Reviewed-by: Jaehoon Chung Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/af8f8b8674ba4fcc9a781019e4aeb72c@hyperstone.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: mtk-sd: Add wait dma stop done flow

2021-11-18T18:15:52+00:00

commit 43e5fee317f4b0a48992b8b07935b1a3ac20ce84 upstream. We found this issue on a 5G platform, during CMDQ error handling, if DMA status is active when it call msdc_reset_hw(), it means mmc host hw reset and DMA transfer will be parallel, mmc host may access sram region unexpectedly. According to the programming guide of mtk-sd host, it needs to wait for dma stop done after set dma stop. This change should be applied to all SoCs. Signed-off-by: Derong Liu Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210827071537.1034-1-derong.liu@mediatek.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: tmio: reenable card irqs after the reset callback

2021-10-28T21:19:32+00:00

The reset callback may clear the internal card detect interrupts, so make sure to reenable them if needed. Fixes: b4d86f37eacb ("mmc: renesas_sdhi: do hard reset if possible") Reported-by: Biju Das Signed-off-by: Wolfram Sang Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211028195149.8003-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson