kernel/linux.git/drivers/mmc, branch v4.17.1

mmc: sdhci-iproc: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for cygnus

2018-05-21T11:27:22+00:00

The SDHCI_QUIRK2_HOST_OFF_CARD_ON is needed for the driver to properly reset the host controller (reset all) on initialization after exiting deep sleep. Signed-off-by: Corneliu Doban Signed-off-by: Scott Branden Reviewed-by: Ray Jui Reviewed-by: Srinath Mannam Fixes: c833e92bbb60 ("mmc: sdhci-iproc: support standard byte register accesses") Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Ulf Hansson

mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register

2018-05-21T11:19:48+00:00

When the host controller accepts only 32bit writes, the value of the 16bit TRANSFER_MODE register, that has the same 32bit address as the 16bit COMMAND register, needs to be saved and it will be written in a 32bit write together with the command as this will trigger the host to send the command on the SD interface. When sending the tuning command, TRANSFER_MODE is written and then sdhci_set_transfer_mode reads it back to clear AUTO_CMD12 bit and write it again resulting in wrong value to be written because the initial write value was saved in a shadow and the read-back returned a wrong value, from the register. Fix sdhci_iproc_readw to return the saved value of TRANSFER_MODE when a saved value exist. Same fix for read of BLOCK_SIZE and BLOCK_COUNT registers, that are saved for a different reason, although a scenario that will cause the mentioned problem on this registers is not probable. Fixes: b580c52d58d9 ("mmc: sdhci-iproc: add IPROC SDHCI driver") Signed-off-by: Corneliu Doban Signed-off-by: Scott Branden Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Ulf Hansson

mmc: sdhci-iproc: remove hard coded mmc cap 1.8v

2018-05-21T11:15:49+00:00

Remove hard coded mmc cap 1.8v from platform data as it is board specific. The 1.8v DDR mmc caps can be enabled using DTS property for those boards that support it. Fixes: b17b4ab8ce38 ("mmc: sdhci-iproc: define MMC caps in platform data") Signed-off-by: Srinath Mannam Signed-off-by: Scott Branden Reviewed-by: Ray Jui Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ulf Hansson

mmc: block: propagate correct returned value in mmc_rpmb_ioctl

2018-05-21T08:57:59+00:00

In commit 97548575bef3 ("mmc: block: Convert RPMB to a character device") a new function `mmc_rpmb_ioctl` was added. The final return is simply returning a value of `0` instead of propagating the correct return code. Discovered during a compilation with W=1, silence the following gcc warning drivers/mmc/core/block.c:2470:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Signed-off-by: Mathieu Malaterre Reviewed-by: Shawn Lin Fixes: 97548575bef3 ("mmc: block: Convert RPMB to a character device") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Ulf Hansson

Merge tag 'mmc-v4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2018-04-20T17:41:31+00:00

Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes: - sdhci-pci: Fixup tuning for AMD for eMMC HS200 mode - renesas_sdhi_internal_dmac: Avoid data corruption by limiting DMA RX" * tag 'mmc-v4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs mmc: sdhci-pci: Only do AMD tuning for HS200

mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs

2018-04-19T12:57:17+00:00

Early revisions of certain SoCs cannot do multiple DMA RX streams in parallel. To avoid data corruption, only allow one DMA RX channel and fall back to PIO, if needed. Signed-off-by: Wolfram Sang Reviewed-by: Yoshihiro Shimoda Tested-by: Nguyen Viet Dung Reviewed-by: Simon Horman Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson

Merge tag 'mmc-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2018-04-12T17:59:03+00:00

Pull MMC fixes from Ulf Hansson: "MMC core: - Prevent bus reference leak in mmc_blk_init() MMC host: - tmio: Fix error handling when issuing CMD23 - jz4740: Fix race condition in IRQ mask update" * tag 'mmc-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: tmio: Fix error handling when issuing CMD23 mmc: core: Prevent bus reference leak in mmc_blk_init() mmc: jz4740: Fix race condition in IRQ mask update

mmc: sdhci-pci: Only do AMD tuning for HS200

2018-04-11T13:01:39+00:00

Commit c31165d7400b ("mmc: sdhci-pci: Add support for HS200 tuning mode on AMD, eMMC-4.5.1") added a HS200 tuning method for use with AMD SDHCI controllers. As described in the commit subject, this tuning is specific for HS200. However, as implemented, this method is used for all host timings, because platform_execute_tuning, if it exists, is called unconditionally by sdhci_execute_tuning(). This breaks tuning when using the AMD controller with, for example, a DDR50 SD card. Instead, we can implement an amd execute_tuning wrapper callback, and then conditionally do the HS200 specific tuning for HS200, and otherwise call back to the standard sdhci_execute_tuning(). Signed-off-by: Daniel Kurtz Acked-by: Shyam Sundar S K Acked-by: Adrian Hunter Fixes: c31165d7400b ("mmc: sdhci-pci: Add support for HS200 tuning mode on AMD, eMMC-4.5.1") Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Ulf Hansson

Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block

2018-04-05T21:27:02+00:00

Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ...

mmc: tmio: Fix error handling when issuing CMD23

2018-04-04T10:21:27+00:00

If an error was detected when CMD23 was issued, command sequence should be terminated with errors and CMD23 should be issued after retuning. Fixes: 8b22c3c18be5 ("mmc: tmio: add CMD23 support") Signed-off-by: Masaharu Hayakawa Signed-off-by: Wolfram Sang Cc: # 4.13+ Signed-off-by: Ulf Hansson