kernel/linux.git/drivers/mmc, branch v4.14.85

mmc: sdhci-pci: Try "cd" for card-detect lookup before using NULL

2018-12-01T08:42:50+00:00

commit cdcefe6bd9df754f528ffc339d3cc143cea4ddf6 upstream. Problem: The card detect IRQ does not work with modern BIOS (that want to use _DSD to provide the card detect GPIO to the driver). Details: The mmc core provides the mmc_gpiod_request_cd() API to let host drivers request the gpio descriptor for the "card detect" pin. This pin is specified in the ACPI for the SDHC device: * Either as a resource using _CRS. This is a method used by legacy BIOS. (The driver needs to tell which resource index). * Or as a named property ("cd-gpios"/"cd-gpio") in _DSD (which internally points to an entry in _CRS). This way, the driver can lookup using a string. This is what modern BIOS prefer to use. This API finally results in a call to the following code: struct gpio_desc *acpi_find_gpio(..., const char *con_id,...) { ... /* Lookup gpio (using "-gpio") in the _DSD */ ... if (!acpi_can_fallback_to_crs(adev, con_id)) return ERR_PTR(-ENOENT); ... /* Falling back to _CRS is allowed, Lookup gpio in the _CRS */ ... } Note that this means that if the ACPI has _DSD properties, the kernel will never use _CRS for the lookup (Because acpi_can_fallback_to_crs() will always be false for any device hat has _DSD entries). The SDHCI driver is thus currently broken on a modern BIOS, even if BIOS provides both _CRS (for index based lookup) and _DSD entries (for string based lookup). Ironically, none of these will be used for the lookup currently because: * Since the con_id is NULL, acpi_find_gpio() does not find a matching entry in DSDT. (The _DSDT entry has the property name = "cd-gpios") * Because ACPI contains DSDT entries, thus acpi_can_fallback_to_crs() returns false (because device properties have been populated from _DSD), thus the _CRS is never used for the lookup. Fix: Try "cd" for lookup in the _DSD before falling back to using NULL so as to try looking up in the _CRS. I've tested this patch successfully with both Legacy BIOS (that provide only _CRS method) as well as modern BIOS (that provide both _CRS and _DSD). Also the use of "cd" appears to be fairly consistent across other users of this API (other MMC host controller drivers). Link: https://lkml.org/lkml/2018/9/25/1113 Signed-off-by: Rajat Jain Acked-by: Adrian Hunter Fixes: f10e4bf6632b ("gpio: acpi: Even more tighten up ACPI GPIO lookups") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01

2018-11-13T19:14:53+00:00

[ Upstream commit 5169894982bb67486d93cc1e10151712bb86bcb6 ] This device reports SDHCI_CLOCK_INT_STABLE even though it's not ready to take SDHCI_CLOCK_CARD_EN. The symptom is that reading SDHCI_CLOCK_CONTROL after enabling the clock shows absence of the bit from the register (e.g. expecting 0x0000fa07 = 0x0000fa03 | SDHCI_CLOCK_CARD_EN but only observed the first operand). mmc1: Timeout waiting for hardware cmd interrupt. mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00000603 mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000001 mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa03 mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 mmc1: sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083 mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 mmc1: sdhci: Caps: 0x25fcc8bf | Caps_1: 0x00002077 mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x005800c8 mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 mmc1: sdhci: Host ctl2: 0x00000008 mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 mmc1: sdhci: ============================================ The problem happens during wakeup from S3. Adding a delay quirk after power up reliably fixes the problem. Signed-off-by: Yu Zhao Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mmc: dw_mmc-rockchip: correct property names in debug

2018-11-04T13:52:44+00:00

[ Upstream commit e988867fd774d00aeaf5d3c332032bf5b97a4147 ] Following up the device tree fixed in commits e78c637127ee ("ARM: dts: rockchip: Fix DWMMC clocks") and ca9eee95a2de ("arm64: dts: rockchip: Fix DWMMC clocks", 2018-02-15), avoid confusion by using the correct property name in the debug output if clocks are not found. Signed-off-by: John Keeping Reviewed-by: Robin Murphy Reviewed-by: Shawn Lin Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: block: avoid multiblock reads for the last sector in SPI mode

2018-10-18T07:16:24+00:00

commit 41591b38f5f8f78344954b68582b5f00e56ffe61 upstream. On some SD cards over SPI, reading with the multiblock read command the last sector will leave the card in a bad state. Remove last sectors from the multiblock reading cmd. Signed-off-by: Chris Boot Signed-off-by: Clément Péron Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: do not try to use 3.3V signaling if not supported

2018-09-26T06:38:11+00:00

[ Upstream commit 1b5190c2e74c47ebe4bcecf7a072358ad9f1feaa ] For eMMC devices it is valid to only support 1.8V signaling. When vqmmc is set to a fixed 1.8V regulator the stack tries to set 3.3V initially and prints the following warning: mmc1: Switching to 3.3V signalling voltage failed Clear the MMC_SIGNAL_VOLTAGE_330 flag in case 3.3V is signaling is not available. This prevents the stack from even trying to use 3.3V signaling and avoids the above warning. Signed-off-by: Stefan Agner Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mmc: tegra: prevent HS200 on Tegra 3

2018-09-26T06:38:11+00:00

[ Upstream commit 127407e36f4fe3a1d5e8b9998b479956ce83a7dc ] The stack assumes that SDHC controller which support SD3.0 (SDR104) do support HS200. This is not the case for Tegra 3, which does support SD 3.0 but only supports eMMC spec 4.41. Use SDHCI_QUIRK2_BROKEN_HS200 to indicate that the controller does not support HS200. Note that commit 156e14b126ff ("mmc: sdhci: fix caps2 for HS200") added the tie between SD3.0 (SDR104) and HS200. I don't think that this is necessarly true. It is fully legitimate to support SD3.0 and not support HS200. The quirk naming suggests something is broken in the controller, but this is not the case: The controller simply does not support HS200. Fixes: 7ad2ed1dfcbe ("mmc: tegra: enable UHS-I modes") Signed-off-by: Stefan Agner Tested-by: Marcel Ziswiler Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-of-esdhc: set proper dma mask for ls104x chips

2018-09-26T06:38:11+00:00

[ Upstream commit 5552d7ad596c3fea953f40fef74170ce0760c04d ] SDHCI controller in ls1043a and ls1046a generate 40-bit wide addresses when doing DMA. Make sure that the corresponding dma mask is correctly configured. Context: when enabling smmu on these chips the following problem is encountered: the smmu input address size is 48 bits so the dma mappings for sdhci end up 48-bit wide. However, on these chips sdhci only use 40-bits of that address size when doing dma. So you end up with a 48-bit address translation in smmu but the device generates transactions with clipped 40-bit addresses, thus smmu context faults are triggered. Setting up the correct dma mask fixes this situation. Signed-off-by: Laurentiu Tudor Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mmc: omap_hsmmc: fix wakeirq handling on removal

2018-09-26T06:38:06+00:00

commit 3c398f3c3bef21961eaaeb93227fa66d440dc83d upstream. after unbinding mmc I get things like this: [ 185.294067] mmc1: card 0001 removed [ 185.305206] omap_hsmmc 480b4000.mmc: wake IRQ with no resume: -13 The wakeirq stays in /proc-interrupts rebinding shows this: [ 289.795959] genirq: Flags mismatch irq 112. 0000200a (480b4000.mmc:wakeup) vs. 0000200a (480b4000.mmc:wakeup) [ 289.808959] omap_hsmmc 480b4000.mmc: Unable to request wake IRQ [ 289.815338] omap_hsmmc 480b4000.mmc: no SDIO IRQ support, falling back to polling That bug seems to be introduced by switching from devm_request_irq() to generic wakeirq handling. So let us cleanup at removal. Signed-off-by: Andreas Kemnade Fixes: 5b83b2234be6 ("mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: renesas_sdhi_internal_dmac: fix #define RST_RESERVED_BITS

2018-09-09T17:55:53+00:00

commit 9faf870e559a710c44e747ba20383ea82d8ac5d2 upstream. The DM_CM_RST register actually has bits 0-31 defaulting to 1s and bits 32-63 defaulting to 0s -- fix off-by-one in #define RST_RESERVED_BITS. Signed-off-by: Sergei Shtylyov Reviewed-by: Wolfram Sang Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: pwrseq: Use kmalloc_array instead of stack VLA

2018-08-03T05:50:37+00:00

[ Upstream commit 486e6661367b40f927aadbed73237693396cbf94 ] The use of stack Variable Length Arrays needs to be avoided, as they can be a vector for stack exhaustion, which can be both a runtime bug (kernel Oops) or a security flaw (overwriting memory beyond the stack). Also, in general, as code evolves it is easy to lose track of how big a VLA can get. Thus, we can end up having runtime failures that are hard to debug. As part of the directive[1] to remove all VLAs from the kernel, and build with -Wvla. Currently driver is using a VLA declared using the number of descriptors. This array is used to store integer values and is later used as an argument to `gpiod_set_array_value_cansleep()` This can be avoided by using `kmalloc_array()` to allocate memory for the array of integer values. Memory is free'd before return from function. >From the code it appears that it is safe to sleep so we can use GFP_KERNEL (based _cansleep() suffix of function `gpiod_set_array_value_cansleep()`. It can be expected that this patch will result in a small increase in overhead due to the use of `kmalloc_array()` [1] https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Tobin C. Harding Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman