kernel/linux.git/drivers/mmc, branch v4.14.286

mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()

2022-05-25T06:41:19+00:00

commit 533a6cfe08f96a7b5c65e06d20916d552c11b256 upstream All callers of __mmc_switch() should now be specifying a valid timeout for the CMD6 command. However, just to be sure, let's print a warning and default to use the generic_cmd6_time in case the provided timeout_ms argument is zero. In this context, let's also simplify some of the corresponding code and clarify some related comments. Signed-off-by: Ulf Hansson Link: https://lore.kernel.org/r/20200122142747.5690-4-ulf.hansson@linaro.org Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman

mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD

2022-05-25T06:41:19+00:00

commit ad91619aa9d78ab1c6d4a969c3db68bc331ae76c upstream The INAND_CMD38_ARG_EXT_CSD is a vendor specific EXT_CSD register, which is used to prepare an erase/trim operation. However, it doesn't make sense to use a timeout of 10 minutes while updating the register, which becomes the case when the timeout_ms argument for mmc_switch() is set to zero. Instead, let's use the generic_cmd6_time, as that seems like a reasonable timeout to use for these cases. Signed-off-by: Ulf Hansson Link: https://lore.kernel.org/r/20200122142747.5690-3-ulf.hansson@linaro.org Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman

mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC

2022-05-25T06:41:19+00:00

commit 24ed3bd01d6a844fd5e8a75f48d0a3d10ed71bf9 upstream The timeout values used while waiting for a CMD6 for BKOPS or a CACHE_FLUSH to complete, are not defined by the eMMC spec. However, a timeout of 10 minutes as is currently being used, is just silly for both of these cases. Instead, let's specify more reasonable timeouts, 120s for BKOPS and 30s for CACHE_FLUSH. Signed-off-by: Ulf Hansson Link: https://lore.kernel.org/r/20200122142747.5690-2-ulf.hansson@linaro.org Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman

mmc: rtsx: add 74 Clocks in power on flow

2022-05-15T17:40:26+00:00

commit 1f311c94aabdb419c28e3147bcc8ab89269f1a7e upstream. SD spec definition: "Host provides at least 74 Clocks before issuing first command" After 1ms for the voltage stable then start issuing the Clock signals if POWER STATE is MMC_POWER_OFF to MMC_POWER_UP to issue Clock signal to card MMC_POWER_UP to MMC_POWER_ON to stop issuing signal to card Signed-off-by: Ricky Wu Link: https://lore.kernel.org/r/1badf10aba764191a1a752edcbf90389@realtek.com Signed-off-by: Ulf Hansson Signed-off-by: Ricky Wu Signed-off-by: Ulf Hansson Signed-off-by: Christian Loehle Signed-off-by: Greg Kroah-Hartman

Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"

2022-04-20T07:08:29+00:00

commit 7e2646ed47542123168d43916b84b954532e5386 upstream. This reverts commit bb32e1987bc55ce1db400faf47d85891da3c9b9f. Commit 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization") contains proper fix for the issue described in commit bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning"). Fixes: 8d876bf472db ("mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable") Cc: stable@vger.kernel.org # 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization") Signed-off-by: Pali Rohár Reviewed-by: Marek Behún Reviewed-by: Marcin Wojtas Link: https://lore.kernel.org/r/20220318141441.32329-1-pali@kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: host: Return an error when ->enable_sdio_irq() ops is missing

2022-04-20T07:08:23+00:00

[ Upstream commit d6c9219ca1139b74541b2a98cee47a3426d754a9 ] Even if the current WARN() notifies the user that something is severely wrong, we can still end up in a PANIC() when trying to invoke the missing ->enable_sdio_irq() ops. Therefore, let's also return an error code and prevent the host from being added. While at it, move the code into a separate function to prepare for subsequent changes and for further host caps validations. Signed-off-by: Ulf Hansson Link: https://lore.kernel.org/r/20220303165142.129745-1-ulf.hansson@linaro.org Signed-off-by: Sasha Levin

mmc: sdhci-of-esdhc: Check for error num after setting mask

2022-02-16T11:44:49+00:00

commit 40c67c291a93f8846c4a972c9ef1b7ba4544c8d0 upstream. Because of the possible failure of the dma_supported(), the dma_set_mask_and_coherent() may return error num. Therefore, it should be better to check it and return the error if fails. And since the sdhci_setup_host() has already checked the return value of the enable_dma, we need not check it in sdhci_resume_host() again. Fixes: 5552d7ad596c ("mmc: sdhci-of-esdhc: set proper dma mask for ls104x chips") Signed-off-by: Jiasheng Jiang Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220112083156.1124782-1-jiasheng@iscas.ac.cn Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

moxart: fix potential use-after-free on remove path

2022-02-11T07:43:36+00:00

commit bd2db32e7c3e35bd4d9b8bbff689434a50893546 upstream. It was reported that the mmc host structure could be accessed after it was freed in moxart_remove(), so fix this by saving the base register of the device and using it instead of the pointer dereference. Cc: Ulf Hansson Cc: Xiyu Yang Cc: Xin Xiong Cc: Xin Tan Cc: Tony Lindgren Cc: Yang Li Cc: linux-mmc@vger.kernel.org Cc: stable Reported-by: whitehat002 Signed-off-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20220127071638.4057899-1-gregkh@linuxfoundation.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO

2022-01-27T08:00:55+00:00

[ Upstream commit 8c3e5b74b9e2146f564905e50ca716591c76d4f1 ] The mmc core takes a specific path to support initializing of a non-standard SDIO card. This is triggered by looking for the card-quirk, MMC_QUIRK_NONSTD_SDIO. In mmc_sdio_init_card() this gets rather messy, as it causes the code to bail out earlier, compared to the usual path. This leads to that the OCR doesn't get saved properly in card->ocr. Fortunately, only omap_hsmmc has been using the MMC_QUIRK_NONSTD_SDIO and is dealing with the issue, by assigning a hardcoded value (0x80) to card->ocr from an ->init_card() ops. To make the behaviour consistent, let's instead rely on the core to save the OCR in card->ocr during initialization. Reported-by: H. Nikolaus Schaller Signed-off-by: Ulf Hansson Signed-off-by: H. Nikolaus Schaller Link: https://lore.kernel.org/r/e7936cff7fc24d187ef2680d3b4edb0ade58f293.1636564631.git.hns@goldelico.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: mxs-mmc: disable regulator on error and in the remove function

2021-11-26T10:40:31+00:00

[ Upstream commit ce5f6c2c9b0fcb4094f8e162cfd37fb4294204f7 ] The 'reg_vmmc' regulator is enabled in the probe. It is never disabled. Neither in the error handling path of the probe nor in the remove function. Register a devm_action to disable it when needed. Fixes: 4dc5a79f1350 ("mmc: mxs-mmc: enable regulator for mmc slot") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/4aadb3c97835f7b80f00819c3d549e6130384e67.1634365151.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin