kernel/linux.git/drivers/mmc, branch v4.14.217

mmc: via-sdmmc: Fix data race bug

2020-11-05T10:06:55+00:00

[ Upstream commit 87d7ad089b318b4f319bf57f1daa64eb6d1d10ad ] via_save_pcictrlreg() should be called with host->lock held as it writes to pm_pcictrl_reg, otherwise there can be a race condition between via_sd_suspend() and via_sdc_card_detect(). The same pattern is used in the function via_reset_pcictrl() as well, where via_save_pcictrlreg() is called with host->lock held. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Madhuparna Bhowmik Link: https://lore.kernel.org/r/20200822061528.7035-1-madhuparnabhowmik10@gmail.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdio: Check for CISTPL_VERS_1 buffer size

2020-10-29T08:07:15+00:00

[ Upstream commit 8ebe2607965d3e2dc02029e8c7dd35fbe508ffd0 ] Before parsing CISTPL_VERS_1 structure check that its size is at least two bytes to prevent buffer overflow. Signed-off-by: Pali Rohár Link: https://lore.kernel.org/r/20200727133837.19086-2-pali@kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: don't set limits.discard_granularity as 0

2020-10-14T07:51:14+00:00

[ Upstream commit 4243219141b67d7c2fdb2d8073c17c539b9263eb ] In mmc_queue_setup_discard() the mmc driver queue's discard_granularity might be set as 0 (when card->pref_erase > max_discard) while the mmc device still declares to support discard operation. This is buggy and triggered the following kernel warning message, WARNING: CPU: 0 PID: 135 at __blkdev_issue_discard+0x200/0x294 CPU: 0 PID: 135 Comm: f2fs_discard-17 Not tainted 5.9.0-rc6 #1 Hardware name: Google Kevin (DT) pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) pc : __blkdev_issue_discard+0x200/0x294 lr : __blkdev_issue_discard+0x54/0x294 sp : ffff800011dd3b10 x29: ffff800011dd3b10 x28: 0000000000000000 x27: ffff800011dd3cc4 x26: ffff800011dd3e18 x25: 000000000004e69b x24: 0000000000000c40 x23: ffff0000f1deaaf0 x22: ffff0000f2849200 x21: 00000000002734d8 x20: 0000000000000008 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000394 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 00000000000008b0 x9 : ffff800011dd3cb0 x8 : 000000000004e69b x7 : 0000000000000000 x6 : ffff0000f1926400 x5 : ffff0000f1940800 x4 : 0000000000000000 x3 : 0000000000000c40 x2 : 0000000000000008 x1 : 00000000002734d8 x0 : 0000000000000000 Call trace: __blkdev_issue_discard+0x200/0x294 __submit_discard_cmd+0x128/0x374 __issue_discard_cmd_orderly+0x188/0x244 __issue_discard_cmd+0x2e8/0x33c issue_discard_thread+0xe8/0x2f0 kthread+0x11c/0x120 ret_from_fork+0x10/0x1c ---[ end trace e4c8023d33dfe77a ]--- This patch fixes the issue by setting discard_granularity as SECTOR_SIZE instead of 0 when (card->pref_erase > max_discard) is true. Now no more complain from __blkdev_issue_discard() for the improper value of discard granularity. This issue is exposed after commit b35fd7422c2f ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()"), a "Fixes:" tag is also added for the commit to make sure people won't miss this patch after applying the change of __blkdev_issue_discard(). Fixes: e056a1b5b67b ("mmc: queue: let host controllers specify maximum discard timeout") Fixes: b35fd7422c2f ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()"). Reported-and-tested-by: Vicente Bergas Signed-off-by: Coly Li Acked-by: Adrian Hunter Cc: Ulf Hansson Link: https://lore.kernel.org/r/20201002013852.51968-1-colyli@suse.de Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: Fix size overflow for mmc partitions

2020-10-01T11:12:29+00:00

[ Upstream commit f3d7c2292d104519195fdb11192daec13229c219 ] With large eMMC cards, it is possible to create general purpose partitions that are bigger than 4GB. The size member of the mmc_part struct is only an unsigned int which overflows for gp partitions larger than 4GB. Change this to a u64 to handle the overflow. Signed-off-by: Bradley Bolen Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci-msm: Add retries when all tuning phases are found valid

2020-09-23T08:46:26+00:00

[ Upstream commit 9d5dcefb7b114d610aeb2371f6a6f119af316e43 ] As the comments in this patch say, if we tune and find all phases are valid it's _almost_ as bad as no phases being found valid. Probably all phases are not really reliable but we didn't detect where the unreliable place is. That means we'll essentially be guessing and hoping we get a good phase. This is not just a problem in theory. It was causing real problems on a real board. On that board, most often phase 10 is found as the only invalid phase, though sometimes 10 and 11 are invalid and sometimes just 11. Some percentage of the time, however, all phases are found to be valid. When this happens, the current logic will decide to use phase 11. Since phase 11 is sometimes found to be invalid, this is a bad choice. Sure enough, when phase 11 is picked we often get mmc errors later in boot. I have seen cases where all phases were found to be valid 3 times in a row, so increase the retry count to 10 just to be extra sure. Fixes: 415b5a75da43 ("mmc: sdhci-msm: Add platform_execute_tuning implementation") Signed-off-by: Douglas Anderson Reviewed-by: Veerabhadrarao Badiganti Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20200827075809.1.If179abf5ecb67c963494db79c3bc4247d987419b@changeid Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci: do not enable card detect interrupt for gpio cd type

2020-07-22T07:22:23+00:00

[ Upstream commit e65bb38824711559844ba932132f417bc5a355e2 ] Except SDHCI_QUIRK_BROKEN_CARD_DETECTION and MMC_CAP_NONREMOVABLE, we also do not need to handle controller native card detect interrupt for gpio cd type. If we wrong enabled the card detect interrupt for gpio case, it will cause a lot of unexpected card detect interrupts during data transfer which should not happen. Signed-off-by: Haibo Chen Acked-by: Adrian Hunter Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/1582100563-20555-2-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci-esdhc-imx: fix the mask for tuning start point

2020-06-20T08:25:14+00:00

[ Upstream commit 1194be8c949b8190b2882ad8335a5d98aa50c735 ] According the RM, the bit[6~0] of register ESDHC_TUNING_CTRL is TUNING_START_TAP, bit[7] of this register is to disable the command CRC check for standard tuning. So fix it here. Fixes: d87fc9663688 ("mmc: sdhci-esdhc-imx: support setting tuning start point") Signed-off-by: Haibo Chen Link: https://lore.kernel.org/r/1590488522-9292-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: via-sdmmc: Respect the cmd->busy_timeout from the mmc core

2020-06-20T08:25:14+00:00

[ Upstream commit 966244ccd2919e28f25555a77f204cd1c109cad8 ] Using a fixed 1s timeout for all commands (and data transfers) is a bit problematic. For some commands it means waiting longer than needed for the timer to expire, which may not a big issue, but still. For other commands, like for an erase (CMD38) that uses a R1B response, may require longer timeouts than 1s. In these cases, we may end up treating the command as it failed, while it just needed some more time to complete successfully. Fix the problem by respecting the cmd->busy_timeout, which is provided by the mmc core. Cc: Bruce Chang Cc: Harald Welte Signed-off-by: Ulf Hansson Link: https://lore.kernel.org/r/20200414161413.3036-17-ulf.hansson@linaro.org Signed-off-by: Sasha Levin

mmc: sdhci-msm: Set SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 quirk

2020-06-20T08:25:14+00:00

[ Upstream commit d863cb03fb2aac07f017b2a1d923cdbc35021280 ] sdhci-msm can support auto cmd12. So enable SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 quirk. Signed-off-by: Veerabhadrarao Badiganti Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/1587363626-20413-3-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdio: Fix potential NULL pointer error in mmc_sdio_init_card()

2020-06-20T08:25:06+00:00

commit f04086c225da11ad16d7f9a2fbca6483ab16dded upstream. During some scenarios mmc_sdio_init_card() runs a retry path for the UHS-I specific initialization, which leads to removal of the previously allocated card. A new card is then re-allocated while retrying. However, in one of the corresponding error paths we may end up to remove an already removed card, which likely leads to a NULL pointer exception. So, let's fix this. Fixes: 5fc3d80ef496 ("mmc: sdio: don't use rocr to check if the card could support UHS mode") Cc: Signed-off-by: Ulf Hansson Link: https://lore.kernel.org/r/20200430091640.455-2-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman