kernel/linux.git/drivers/mmc/host, branch v7.1.12

mmc: loongson2: Fix sg iteration in data reorder functions

2026-08-23T12:29:23+00:00

commit 00179ed9fbe07799676e2cb63c4e7f0e7cd80a5c upstream. In ls2k0500_mmc_reorder_cmd_data() and ls2k2000_mmc_reorder_cmd_data(), the for_each_sg() macro already iterates over the scatterlist entries, with 'sg' pointing to the current entry. However, the code incorrectly uses '&sg[i]' and 'sg_dma_len(&sg[i])' inside the loop, which treats 'sg' as an array base and indexes it again, leading to access of wrong sg entries (or out-of-bounds if the list is not an array). Cc: stable@vger.kernel.org Fixes: d0f8e961deae ("mmc: loongson2: Add Loongson-2K2000 SD/SDIO/eMMC controller driver") Fixes: 2115772014bd ("mmc: loongson2: Add Loongson-2K SD/SDIO controller driver") Signed-off-by: Binbin Zhou Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: atmel-mci: Fix use-after-free in atmci_remove due to race condition

2026-08-23T12:29:23+00:00

commit c125ee35a49a0518521b52b27631eef061b8719a upstream. In atmci_probe, &host->bh_work is bound with atmci_work_func, and atmci_interrupt, atmci_timeout_timer and atmci_dma_complete can all queue this work on system_bh_wq. If we remove the module, atmci_remove makes cleanup and the memory allocated for host with devm_kzalloc() is released after the remove callback returns, while the work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | atmci_interrupt | queue_work(system_bh_wq, | &host->bh_work) atmci_remove | atmci_cleanup_slot(...) | atmci_writel(host, ATMCI_IDR, ~0UL) | timer_delete_sync(&host->timer) | dma_release_channel(host->dma.chan) | free_irq(platform_get_irq(pdev, 0), host) | | atmci_work_func | // use host // devm resources released after | // remove returns, host is freed | | // use host (use-after-free) Fix it by canceling the work after all the sources that can schedule it (IRQ handler, timeout timer and DMA completion callback) have been stopped, and before proceeding with the remaining cleanup in atmci_remove. Fixes: 7d2be0749a59 ("atmel-mci: Driver for Atmel on-chip MMC controllers") Assisted-by: Codex:deepseek-v4-flash Signed-off-by: Pei Xiao Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: make tuning_err a signed int

2026-08-23T12:29:23+00:00

commit ae31bcc92bb42502bb7c9029e6dc7a824cf6cd14 upstream. Coverity report INTEGER_OVERFLOW for host->tuning_err. The tuning_err field in struct sdhci_host is used to store an error code for re-tuning, but it was declared as unsigned int. Several call sites store negative error codes into it and later compare against negative values: - sdhci.c, sdhci-of-dwcmshc.c and sdhci-pci-gli.c assign it the return value of __sdhci_execute_tuning()/__sdhci_execute_tuning_9750(), both of which return a signed int (possibly a negative errno); - sdhci-of-esdhc.c assigns host->tuning_err = -EAGAIN and later does "ret = host->tuning_err; if (ret == -EAGAIN ...)"; - sdhci-of-dwcmshc.c prints it with the %d (signed) conversion. Storing a negative errno in an unsigned int and reading it back as a signed int only happens to work because of two's-complement, same-width integer conversions. It is misleading and triggers sign-conversion warnings. All users treat the value either as a signed error code or as a boolean (zero / non-zero), so changing the type to a signed int is safe and makes the intent explicit. Fixes: 7d8bb1f46e13 ("mmc: sdhci: add tuning error codes") Assisted-by: Cline:claude-sonnet [read_file, search_files, git] Signed-off-by: Haibo Chen Reviewed-by: Frank Li Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: unmap the bounce buffer before device release

2026-08-23T12:29:23+00:00

commit 9e9f561269dff35e6f84ed21776ec37fd6360b03 upstream. sdhci_allocate_bounce_buffer() allocates its buffer with devm_kmalloc() but maps it with dma_map_single(). The buffer is therefore released by devres without the streaming DMA mapping being unmapped. Register a managed action after dma_map_single() succeeds so the mapping is removed before devres releases the buffer. The action is registered only for buffers allocated and mapped by the SDHCI core, leaving buffers provided by host drivers under their existing ownership. Fixes: bd9b902798ab ("mmc: sdhci: Implement an SDHCI-specific bounce buffer") Cc: stable@vger.kernel.org Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Reviewed-by: Linus Walleij Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: omap_hsmmc: fix busy_timeout overflow in ns conversion on 32-bit

2026-08-23T12:29:23+00:00

commit f64ea900e4bda3055ef24a2c906f8d049cf1c3bd upstream. omap_hsmmc_prepare_data() converts the command busy timeout to nanoseconds with: timeout = req->cmd->busy_timeout * NSEC_PER_MSEC; busy_timeout is an unsigned int (milliseconds) and timeout is a u64, but NSEC_PER_MSEC is 1000000L. On 32-bit builds the multiplication is performed in 32-bit arithmetic and wraps for busy_timeout values above ~4294 ms, before the result is assigned to the u64. The driver does not set mmc->max_busy_timeout, so the core does not cap the busy timeout, and commands such as erase or SANITIZE (MMC_SANITIZE_TIMEOUT_MS is 240000 ms) can pass a busy_timeout far larger than 4294 ms. The wrapped, much smaller ns value is then programmed via set_data_timeout(), so the data timeout is set too short and the operation can time out prematurely. Cast busy_timeout to u64 before the multiplication so the conversion is done in 64-bit arithmetic. Fixes: 8cc9a3e73de1 ("mmc: host: omap_hsmmc: use generic_cmd6_time to program timeout value for CMD6") Cc: stable@vger.kernel.org Signed-off-by: Zhan Xusheng Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-esdhc-imx: fix resume error handling

2026-07-24T14:21:24+00:00

commit e27c946b589c53520409a0956b33d52ef7a0898f upstream. Check pm_runtime_force_resume() return value in resume. If it fails (clock enable failure), return immediately since accessing hardware registers on an unclocked device would cause a kernel panic. The early return intentionally skips enable_irq() and sdhci_disable_irq_wakeups() because the IRQ handler reads SDHCI_INT_STATUS, which would also fault without clocks. The PM runtime usage counter leak only affects this already-broken device instance and is an acceptable tradeoff to preserve system stability. Remove the return value check for mmc_gpio_set_cd_wake(host->mmc, false) since disable_irq_wake() called internally always returns 0. Also return 0 explicitly on the success path instead of propagating stale return values. Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic") Acked-by: Adrian Hunter Reviewed-by: Frank Li Signed-off-by: Luke Wang Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-esdhc-imx: make non-fatal errors non-blocking in suspend

2026-07-24T14:21:24+00:00

commit 6aa00a43bbd3d994558a55586351757cebbff236 upstream. Make pinctrl_pm_select_sleep_state() and mmc_gpio_set_cd_wake() failures non-fatal in the suspend path. These failures only mean slightly higher power consumption or missing CD wakeup capability, but should not block system suspend. Also change the function to always return 0 on the success path instead of propagating non-fatal warning return values. Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic") Acked-by: Adrian Hunter Signed-off-by: Luke Wang Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend

2026-07-24T14:21:24+00:00

commit 8da5930144712412d85e7f868693d96ec5c2018c upstream. Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to simplify error handling. pm_runtime_resume_and_get() automatically drops the usage counter on failure, avoiding the need for a separate pm_runtime_put_noidle() call. If it fails, the device is unclocked and accessing hardware registers would cause a kernel panic, so return the error immediately. Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic") Acked-by: Adrian Hunter Signed-off-by: Luke Wang Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt

2026-07-24T14:21:24+00:00

commit 9d87eaf985cef9581b6ed99b461b38e8cd666480 upstream. When using WIFI out-of-band wakeup, an "irq xxx: nobody cared" warning occurs. This happens because the usdhc interrupt is not disabled during system suspend when device_may_wakeup() returns false. The sequence of events leading to this issue: 1. System enters suspend without disabling usdhc interrupt (because device_may_wakeup() returns false for usdhc device) 2. WIFI out-of-band wakeup triggers system resume via GPIO interrupt 3. WIFI sends a Card interrupt before usdhc has fully resumed 4. usdhc is still in runtime suspend state and cannot handle the interrupt properly 5. The unhandled interrupt triggers "nobody cared" warning Fix this by unconditionally disabling the usdhc interrupt during suspend and re-enabling it during resume, regardless of the wakeup capability. This ensures no interrupts are processed during the suspend/resume transition. Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic") Acked-by: Adrian Hunter Reviewed-by: Haibo Chen Signed-off-by: Luke Wang Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore

2026-07-24T14:21:24+00:00

commit 5adc14cd4b905629d5b9163b3a416dcab24c7ce2 upstream. esdhc_change_pinstate() checks for pins_100mhz and pins_200mhz at the top of the function and returns -EINVAL if either is not defined. This prevents the default case from ever being reached, which means devices with a sleep pinctrl state but without high-speed pin states (100mhz/ 200mhz) can never restore their default pin configuration. Move the IS_ERR checks for pins_100mhz and pins_200mhz into their respective switch cases. Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic") Acked-by: Adrian Hunter Reviewed-by: Frank Li Signed-off-by: Luke Wang Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman