kernel/linux.git/drivers/mmc/host, branch v7.0.13

mmc: sdhci: add signal voltage switch in sdhci_resume_host

2026-06-19T11:48:07+00:00

commit f595e8e77a51eee35e331f69321766593a845ef2 upstream. I met one suspend/resume issue with sdr104 capable sdio wifi card (with "keep-power-in-suspend" set in DT property): After resuming from suspend to ram, the sdio wifi card stops working. Further debug shows that although ios shows the sdio card is at sdr104 mode, the voltage is still at 3V3. This is due to missing the calling of ->start_signal_voltage_switch() in sdhci_resume_host(). Fix this issue by adding ->start_signal_voltage_switch() in sdhci_resume_host(). This also matches what we do for sdhci_runtime_resume_host(). Then the question is: why this issue hasn't reported and fixed for so long time. IMHO, several reasons: Some host controllers just kick off the runtime resume for system resume, so they benefit from the well supported runtime pm code; Some platforms just use the old sdio wifi card which doesn't need signal voltage switch at all, the default voltage is 3v3 after resuming. Fixes: 6308d2905bd3 ("mmc: sdhci: add quirk for keeping card power during suspend") Signed-off-by: Jisheng Zhang Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-of-dwcmshc: Fix reset, clk, and SDIO support for Eswin EIC7700

2026-06-19T11:48:07+00:00

commit 8d4ae34e997062076a9098602eaca43353665bd9 upstream. The EIC7700 code in sdhci-of-dwcmshc uses host->mmc->caps2 to select different configuration paths for different card types. The current logic distinguishes eMMC and SD, but does not handle SDIO separately. Update the EIC7700 card-type checks so that eMMC, SD and SDIO are distinguished explicitly. Switch the reset path to dwcmshc_reset() so that pending interrupt state is cleared consistently, and use sdhci_enable_clk() so the clock enable sequence follows the standard SDHCI flow. Fixes: 32b2633219d3 ("mmc: sdhci-of-dwcmshc: Add support for Eswin EIC7700") Signed-off-by: Huan He Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: renesas_sdhi: Add OF entry for RZ/G2H SoC

2026-06-19T11:48:07+00:00

commit f48ee49726ee4ab545fd2dc644f169c0809b19b3 upstream. The RZ/G2H (R8A774E1) SoC was previously handled via the generic "renesas,rcar-gen3-sdhi" fallback compatible string. However, because the SDHI IP on RZ/G2H is identical with the R-Car H3-N (R8A77951), it requires the specific quirks and configuration defined in `of_r8a7795_compatible` rather than the generic Gen3 data. Add the explicit "renesas,sdhi-r8a774e1" match entry to map it correctly. Note that the DT binding file renesas,sdhi.yaml does not need an update as the entry for this SoC is already present. Fixes: 31941342888d ("arm64: dts: renesas: r8a774e1: Add SDHI nodes") Cc: stable@vger.kernel.org Signed-off-by: Lad Prabhakar Reviewed-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: litex_mmc: Set mandatory idle clocks before CMD0

2026-06-19T11:48:07+00:00

commit 99982b743e5ba72bd1f5de0e03e3b96ae70b1e51 upstream. The litex_mmc driver assumes the card is already probed in the BIOS and skip the phy initialization. This will cause the command fail like the following when the old card is unplugged and then insert a new card: [ 62.923593] litex-mmc f0004000.mmc: Command (cmd 8) error, status -110 [ 62.949717] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110 [ 62.976606] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110 [ 63.002516] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110 [ 63.028442] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110 Add required clock settings and initialization for the CMD 0, so it can probe the new card. Fixes: 92e099104729 ("mmc: Add driver for LiteX's LiteSDCard interface") Signed-off-by: Inochi Amaoto Reviewed-by: Gabriel Somlo Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: dw_mmc-rockchip: Add missing private data for very old controllers

2026-06-19T11:48:07+00:00

commit 1e9a4850afa0ceb63984fb1a9f3e86d0fc4fd18f upstream. The really old controllers (rk2928, rk3066, rk3188) do not support UHS speeds at all, and thus never handled phase data. For that reason it never had a parse_dt callback and no driver private data at all. Commit ff6f0286c896 ("mmc: dw_mmc-rockchip: Add memory clock auto-gating support") makes the private data sort of mandatory, because the init function checks whether phases are configured internally or through the clock controller. This results in the old SoCs then experiencing NULL-pointer dereferences when they try to access that private-data struct. While we could have if (priv) conditionals in all places, it's way less cluttery to just give the old types their private-data struct. Fixes: ff6f0286c896 ("mmc: dw_mmc-rockchip: Add memory clock auto-gating support") Cc: stable@vger.kernel.org Signed-off-by: Heiko Stuebner Acked-by: Shawn Lin Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: litex_mmc: Use DIV_ROUND_UP for more accurate clock calculation

2026-06-19T11:47:57+00:00

commit b837e38c255dd9f8b53511d52e87f1fda32b3dfe upstream. The previous clock uses roundup_pow_of_two() to calculate the core clock frequency. It does not meet the actual hardware meaning. The actual frequency is calculated by "ref_clk / ((div >> 1) << 1)". Fix the clock divider calculation. Fixes: 92e099104729 ("mmc: Add driver for LiteX's LiteSDCard interface") Signed-off-by: Inochi Amaoto Reviewed-by: Gabriel Somlo Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-of-dwcmshc: Disable clock before DLL configuration

2026-05-07T04:14:01+00:00

commit 6546a49bbe656981d99a389195560999058c89c4 upstream. According to the ASIC design recommendations, the clock must be disabled before operating the DLL to prevent glitches that could affect the internal digital logic. In extreme cases, failing to do so may cause the controller to malfunction completely. Adds a step to disable the clock before DLL configuration and re-enables it at the end. Fixes: 08f3dff799d4 ("mmc: sdhci-of-dwcmshc: add rockchip platform support") Cc: stable@vger.kernel.org Signed-off-by: Shawn Lin Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: vub300: fix use-after-free on disconnect

2026-03-31T11:11:20+00:00

The vub300 driver maintains an explicit reference count for the controller and its driver data and the last reference can in theory be dropped after the driver has been unbound. This specifically means that the controller allocation must not be device managed as that can lead to use-after-free. Note that the lifetime is currently also incorrectly tied the parent USB device rather than interface, which can lead to memory leaks if the driver is unbound without its device being physically disconnected (e.g. on probe deferral). Fix both issues by reverting to non-managed allocation of the controller. Fixes: dcfdd698dc52 ("mmc: vub300: Use devm_mmc_alloc_host() helper") Cc: stable@vger.kernel.org # 6.17+ Cc: Binbin Zhou Signed-off-by: Johan Hovold Signed-off-by: Ulf Hansson

mmc: vub300: fix NULL-deref on disconnect

2026-03-31T11:11:10+00:00

Make sure to deregister the controller before dropping the reference to the driver data on disconnect to avoid NULL-pointer dereferences or use-after-free. Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Johan Hovold Signed-off-by: Ulf Hansson

mmc: sdhci: fix timing selection for 1-bit bus width

2026-03-16T15:08:54+00:00

When 1-bit bus width is used with HS200/HS400 capabilities set, mmc_select_hs200() returns 0 without actually switching. This causes mmc_select_timing() to skip mmc_select_hs(), leaving eMMC in legacy mode (26MHz) instead of High Speed SDR (52MHz). Per JEDEC eMMC spec section 5.3.2, 1-bit mode supports High Speed SDR. Drop incompatible HS200/HS400/UHS/DDR caps early so timing selection falls through to mmc_select_hs() correctly. Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure") Signed-off-by: Luke Wang Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson