kernel/linux.git/drivers/mmc/host, branch v6.6.155

mmc: sdhci: make tuning_err a signed int

2026-08-23T12:19:59+00:00

commit ae31bcc92bb42502bb7c9029e6dc7a824cf6cd14 upstream. Coverity report INTEGER_OVERFLOW for host->tuning_err. The tuning_err field in struct sdhci_host is used to store an error code for re-tuning, but it was declared as unsigned int. Several call sites store negative error codes into it and later compare against negative values: - sdhci.c, sdhci-of-dwcmshc.c and sdhci-pci-gli.c assign it the return value of __sdhci_execute_tuning()/__sdhci_execute_tuning_9750(), both of which return a signed int (possibly a negative errno); - sdhci-of-esdhc.c assigns host->tuning_err = -EAGAIN and later does "ret = host->tuning_err; if (ret == -EAGAIN ...)"; - sdhci-of-dwcmshc.c prints it with the %d (signed) conversion. Storing a negative errno in an unsigned int and reading it back as a signed int only happens to work because of two's-complement, same-width integer conversions. It is misleading and triggers sign-conversion warnings. All users treat the value either as a signed error code or as a boolean (zero / non-zero), so changing the type to a signed int is safe and makes the intent explicit. Fixes: 7d8bb1f46e13 ("mmc: sdhci: add tuning error codes") Assisted-by: Cline:claude-sonnet [read_file, search_files, git] Signed-off-by: Haibo Chen Reviewed-by: Frank Li Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: unmap the bounce buffer before device release

2026-08-23T12:19:59+00:00

commit 9e9f561269dff35e6f84ed21776ec37fd6360b03 upstream. sdhci_allocate_bounce_buffer() allocates its buffer with devm_kmalloc() but maps it with dma_map_single(). The buffer is therefore released by devres without the streaming DMA mapping being unmapped. Register a managed action after dma_map_single() succeeds so the mapping is removed before devres releases the buffer. The action is registered only for buffers allocated and mapped by the SDHCI core, leaving buffers provided by host drivers under their existing ownership. Fixes: bd9b902798ab ("mmc: sdhci: Implement an SDHCI-specific bounce buffer") Cc: stable@vger.kernel.org Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Reviewed-by: Linus Walleij Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: omap_hsmmc: fix busy_timeout overflow in ns conversion on 32-bit

2026-08-23T12:19:59+00:00

commit f64ea900e4bda3055ef24a2c906f8d049cf1c3bd upstream. omap_hsmmc_prepare_data() converts the command busy timeout to nanoseconds with: timeout = req->cmd->busy_timeout * NSEC_PER_MSEC; busy_timeout is an unsigned int (milliseconds) and timeout is a u64, but NSEC_PER_MSEC is 1000000L. On 32-bit builds the multiplication is performed in 32-bit arithmetic and wraps for busy_timeout values above ~4294 ms, before the result is assigned to the u64. The driver does not set mmc->max_busy_timeout, so the core does not cap the busy timeout, and commands such as erase or SANITIZE (MMC_SANITIZE_TIMEOUT_MS is 240000 ms) can pass a busy_timeout far larger than 4294 ms. The wrapped, much smaller ns value is then programmed via set_data_timeout(), so the data timeout is set too short and the operation can time out prematurely. Cast busy_timeout to u64 before the multiplication so the conversion is done in 64-bit arithmetic. Fixes: 8cc9a3e73de1 ("mmc: host: omap_hsmmc: use generic_cmd6_time to program timeout value for CMD6") Cc: stable@vger.kernel.org Signed-off-by: Zhan Xusheng Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: vub300: defer reset until cmd_mutex is unlocked

2026-07-24T14:03:46+00:00

commit ee5fb641c4ccac8406c668d3e947eb20ce44f233 upstream. vub300_cmndwork_thread() holds cmd_mutex while it sends a command and waits for the command response. If the response wait times out, __vub300_command_response() kills the command URBs and then synchronously resets the USB device through usb_reset_device(). That reset path re-enters the driver through vub300_pre_reset(), which also takes cmd_mutex. The worker therefore tries to acquire the same mutex recursively while it is still holding it from the command path. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the real worker and timeout/reset carrier: vub300_cmndwork_thread() __vub300_command_response() usb_lock_device_for_reset() usb_reset_device() vub300_pre_reset() Lockdep reported the same-task recursive acquisition on cmd_mutex: WARNING: possible recursive locking detected ... (&test_vub300.cmd_mutex) ... at: usb_reset_device... [vuln_msv] ... (&test_vub300.cmd_mutex) ... at: vub300_cmndwork_thread+0x12/0x20 [vuln_msv] Workqueue: vub300_cmd_wq vub300_cmndwork_thread [vuln_msv] *** DEADLOCK *** Return a flag from __vub300_command_response() when the timeout path needs a device reset, then perform the reset after vub300_cmndwork_thread() has cleared the in-flight command state and dropped cmd_mutex. The reset is still attempted before mmc_request_done(), preserving the existing request completion ordering while avoiding the recursive lock. Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: add signal voltage switch in sdhci_resume_host

2026-06-19T11:39:36+00:00

commit f595e8e77a51eee35e331f69321766593a845ef2 upstream. I met one suspend/resume issue with sdr104 capable sdio wifi card (with "keep-power-in-suspend" set in DT property): After resuming from suspend to ram, the sdio wifi card stops working. Further debug shows that although ios shows the sdio card is at sdr104 mode, the voltage is still at 3V3. This is due to missing the calling of ->start_signal_voltage_switch() in sdhci_resume_host(). Fix this issue by adding ->start_signal_voltage_switch() in sdhci_resume_host(). This also matches what we do for sdhci_runtime_resume_host(). Then the question is: why this issue hasn't reported and fixed for so long time. IMHO, several reasons: Some host controllers just kick off the runtime resume for system resume, so they benefit from the well supported runtime pm code; Some platforms just use the old sdio wifi card which doesn't need signal voltage switch at all, the default voltage is 3v3 after resuming. Fixes: 6308d2905bd3 ("mmc: sdhci: add quirk for keeping card power during suspend") Signed-off-by: Jisheng Zhang Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: renesas_sdhi: Add OF entry for RZ/G2H SoC

2026-06-19T11:39:36+00:00

commit f48ee49726ee4ab545fd2dc644f169c0809b19b3 upstream. The RZ/G2H (R8A774E1) SoC was previously handled via the generic "renesas,rcar-gen3-sdhi" fallback compatible string. However, because the SDHI IP on RZ/G2H is identical with the R-Car H3-N (R8A77951), it requires the specific quirks and configuration defined in `of_r8a7795_compatible` rather than the generic Gen3 data. Add the explicit "renesas,sdhi-r8a774e1" match entry to map it correctly. Note that the DT binding file renesas,sdhi.yaml does not need an update as the entry for this SoC is already present. Fixes: 31941342888d ("arm64: dts: renesas: r8a774e1: Add SDHI nodes") Cc: stable@vger.kernel.org Signed-off-by: Lad Prabhakar Reviewed-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: litex_mmc: Set mandatory idle clocks before CMD0

2026-06-19T11:39:36+00:00

commit 99982b743e5ba72bd1f5de0e03e3b96ae70b1e51 upstream. The litex_mmc driver assumes the card is already probed in the BIOS and skip the phy initialization. This will cause the command fail like the following when the old card is unplugged and then insert a new card: [ 62.923593] litex-mmc f0004000.mmc: Command (cmd 8) error, status -110 [ 62.949717] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110 [ 62.976606] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110 [ 63.002516] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110 [ 63.028442] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110 Add required clock settings and initialization for the CMD 0, so it can probe the new card. Fixes: 92e099104729 ("mmc: Add driver for LiteX's LiteSDCard interface") Signed-off-by: Inochi Amaoto Reviewed-by: Gabriel Somlo Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: litex_mmc: Use DIV_ROUND_UP for more accurate clock calculation

2026-06-19T11:39:32+00:00

commit b837e38c255dd9f8b53511d52e87f1fda32b3dfe upstream. The previous clock uses roundup_pow_of_two() to calculate the core clock frequency. It does not meet the actual hardware meaning. The actual frequency is calculated by "ref_clk / ((div >> 1) << 1)". Fix the clock divider calculation. Fixes: 92e099104729 ("mmc: Add driver for LiteX's LiteSDCard interface") Signed-off-by: Inochi Amaoto Reviewed-by: Gabriel Somlo Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-of-dwcmshc: Disable clock before DLL configuration

2026-05-17T15:13:30+00:00

commit 6546a49bbe656981d99a389195560999058c89c4 upstream. According to the ASIC design recommendations, the clock must be disabled before operating the DLL to prevent glitches that could affect the internal digital logic. In extreme cases, failing to do so may cause the controller to malfunction completely. Adds a step to disable the clock before DLL configuration and re-enables it at the end. Fixes: 08f3dff799d4 ("mmc: sdhci-of-dwcmshc: add rockchip platform support") Cc: stable@vger.kernel.org Signed-off-by: Shawn Lin Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: vub300: fix NULL-deref on disconnect

2026-04-18T08:39:52+00:00

commit dff34ef879c5e73298443956a8b391311ba78d57 upstream. Make sure to deregister the controller before dropping the reference to the driver data on disconnect to avoid NULL-pointer dereferences or use-after-free. Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Johan Hovold Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman