kernel/linux.git/drivers/mmc/host, branch v6.18.34

mmc: sdhci-of-dwcmshc: Disable clock before DLL configuration

2026-05-07T04:11:48+00:00

commit 6546a49bbe656981d99a389195560999058c89c4 upstream. According to the ASIC design recommendations, the clock must be disabled before operating the DLL to prevent glitches that could affect the internal digital logic. In extreme cases, failing to do so may cause the controller to malfunction completely. Adds a step to disable the clock before DLL configuration and re-enables it at the end. Fixes: 08f3dff799d4 ("mmc: sdhci-of-dwcmshc: add rockchip platform support") Cc: stable@vger.kernel.org Signed-off-by: Shawn Lin Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: vub300: fix use-after-free on disconnect

2026-04-18T08:45:00+00:00

commit 8f4d20a710225ec7a565f6a0459862d3b1f32330 upstream. The vub300 driver maintains an explicit reference count for the controller and its driver data and the last reference can in theory be dropped after the driver has been unbound. This specifically means that the controller allocation must not be device managed as that can lead to use-after-free. Note that the lifetime is currently also incorrectly tied the parent USB device rather than interface, which can lead to memory leaks if the driver is unbound without its device being physically disconnected (e.g. on probe deferral). Fix both issues by reverting to non-managed allocation of the controller. Fixes: dcfdd698dc52 ("mmc: vub300: Use devm_mmc_alloc_host() helper") Cc: stable@vger.kernel.org # 6.17+ Cc: Binbin Zhou Signed-off-by: Johan Hovold Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: vub300: fix NULL-deref on disconnect

2026-04-18T08:45:00+00:00

commit dff34ef879c5e73298443956a8b391311ba78d57 upstream. Make sure to deregister the controller before dropping the reference to the driver data on disconnect to avoid NULL-pointer dereferences or use-after-free. Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Johan Hovold Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: fix timing selection for 1-bit bus width

2026-03-25T10:10:34+00:00

commit 5e3486e64094c28a526543f1e8aa0d5964b7f02d upstream. When 1-bit bus width is used with HS200/HS400 capabilities set, mmc_select_hs200() returns 0 without actually switching. This causes mmc_select_timing() to skip mmc_select_hs(), leaving eMMC in legacy mode (26MHz) instead of High Speed SDR (52MHz). Per JEDEC eMMC spec section 5.3.2, 1-bit mode supports High Speed SDR. Drop incompatible HS200/HS400/UHS/DDR caps early so timing selection falls through to mmc_select_hs() correctly. Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure") Signed-off-by: Luke Wang Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-pci-gli: fix GL9750 DMA write corruption

2026-03-25T10:10:34+00:00

commit 2b76e0cc7803e5ab561c875edaba7f6bbd87fbb0 upstream. The GL9750 SD host controller has intermittent data corruption during DMA write operations. The GM_BURST register's R_OSRC_Lmt field (bits 17:16), which limits outstanding DMA read requests from system memory, is not being cleared during initialization. The Windows driver sets R_OSRC_Lmt to zero, limiting requests to the smallest unit. Clear R_OSRC_Lmt to match the Windows driver behavior. This eliminates write corruption verified with f3write/f3read tests while maintaining DMA performance. Cc: stable@vger.kernel.org Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support") Closes: https://lore.kernel.org/linux-mmc/33d12807-5c72-41ce-8679-57aa11831fad@linux.dev/ Acked-by: Adrian Hunter Signed-off-by: Matthew Schwartz Reviewed-by: Ben Chuang Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: dw_mmc-rockchip: Fix runtime PM support for internal phase support

2026-03-19T15:08:49+00:00

[ Upstream commit 6465a8bbb0f6ad98aeb66dc9ea19c32c193a610b ] RK3576 is the first platform to introduce internal phase support, and subsequent platforms are expected to adopt a similar design. In this architecture, runtime suspend powers off the attached power domain, which resets registers, including vendor-specific ones such as SDMMC_TIMING_CON0, SDMMC_TIMING_CON1, and SDMMC_MISC_CON. These registers must be saved and restored, a requirement that falls outside the scope of the dw_mmc core. Fixes: 59903441f5e4 ("mmc: dw_mmc-rockchip: Add internal phase support") Signed-off-by: Shawn Lin Tested-by: Marco Schirrmeister Reviewed-by: Heiko Stuebner Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mmc: dw_mmc-rockchip: Add memory clock auto-gating support

2026-03-19T15:08:49+00:00

[ Upstream commit ff6f0286c896f062853552097220dd93961be9c4 ] Per design recommendations, the memory clock can be gated when there is no in-flight transfer, which helps save power. This feature is introduced alongside internal phase support, and this patch enables it. Signed-off-by: Shawn Lin Signed-off-by: Ulf Hansson Stable-dep-of: 6465a8bbb0f6 ("mmc: dw_mmc-rockchip: Fix runtime PM support for internal phase support") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mmc: mmci: Fix device_node reference leak in of_get_dml_pipe_index()

2026-03-19T15:08:29+00:00

commit af12e64ae0661546e8b4f5d30d55c5f53a11efe7 upstream. When calling of_parse_phandle_with_args(), the caller is responsible to call of_node_put() to release the reference of device node. In of_get_dml_pipe_index(), it does not release the reference. Fixes: 9cb15142d0e3 ("mmc: mmci: Add qcom dml support to the driver.") Signed-off-by: Felix Gu Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

Revert "mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms"

2026-02-26T22:59:34+00:00

[ Upstream commit ff112f1ecd10b72004eac05bae395e1c65f0c63c ] This reverts commit aced969e9bf3701dc75cfca57c78c031b7875b9d. It was determined that this was not the correct "fix", so should be reverted. Fixes: aced969e9bf3 ("mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms") Cc: Matthew Schwartz Cc: Ulf Hansson Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms

2026-02-26T22:59:33+00:00

[ Upstream commit aced969e9bf3701dc75cfca57c78c031b7875b9d ] The existing 1ms delay in sd_power_on is insufficient and causes resume errors around 4% of the time. Increasing the delay to 5ms resolves this issue after testing 300 s2idle cycles. Fixes: 1f311c94aabd ("mmc: rtsx: add 74 Clocks in power on flow") Signed-off-by: Matthew Schwartz Link: https://patch.msgid.link/20260105060236.400366-3-matthew.schwartz@linux.dev Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin