kernel/linux.git/drivers/mmc/host, branch v6.1.87

mmc: sdhci-omap: re-tuning is needed after a pm transition to support emmc HS200 mode

2024-04-03T13:19:48+00:00

commit f9e2a5b00a35f2c064dc679808bc8db5cc779ed6 upstream. "PM runtime functions" was been added in sdhci-omap driver in commit f433e8aac6b9 ("mmc: sdhci-omap: Implement PM runtime functions") along with "card power off and enable aggressive PM" in commit 3edf588e7fe0 ("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM"). Since then, the sdhci-omap driver doesn't work using mmc-hs200 mode due to the tuning values being lost during a pm transition. As for the sdhci_am654 driver, request a new tuning sequence before suspend (sdhci_omap_runtime_suspend()), otherwise the device will trigger cache flush error: mmc1: cache flush error -110 (ETIMEDOUT) mmc1: error -110 doing aggressive suspend followed by I/O errors produced by fdisk -l /dev/mmcblk1boot1: I/O error, dev mmcblk1boot0, sector 64384 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 I/O error, dev mmcblk1boot1, sector 64384 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 I/O error, dev mmcblk1boot1, sector 64384 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Buffer I/O error on dev mmcblk1boot1, logical block 8048, async page read I/O error, dev mmcblk1boot0, sector 64384 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Buffer I/O error on dev mmcblk1boot0, logical block 8048, async page read Don't re-tune if auto retuning is supported in HW (when SDHCI_TUNING_MODE_3 is available). Link: https://lore.kernel.org/all/2e5f1997-564c-44e4-b357-6343e0dae7ab@smile.fr Fixes: f433e8aac6b9 ("mmc: sdhci-omap: Implement PM runtime functions") Signed-off-by: Romain Naour Reviewed-by: Tony Lindgren Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240315234444.816978-1-romain.naour@smile.fr Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: tmio: avoid concurrent runs of mmc_request_done()

2024-04-03T13:19:30+00:00

[ Upstream commit e8d1b41e69d72c62865bebe8f441163ec00b3d44 ] With the to-be-fixed commit, the reset_work handler cleared 'host->mrq' outside of the spinlock protected critical section. That leaves a small race window during execution of 'tmio_mmc_reset()' where the done_work handler could grab a pointer to the now invalid 'host->mrq'. Both would use it to call mmc_request_done() causing problems (see link below). However, 'host->mrq' cannot simply be cleared earlier inside the critical section. That would allow new mrqs to come in asynchronously while the actual reset of the controller still needs to be done. So, like 'tmio_mmc_set_ios()', an ERR_PTR is used to prevent new mrqs from coming in but still avoiding concurrency between work handlers. Reported-by: Dirk Behme Closes: https://lore.kernel.org/all/20240220061356.3001761-1-dirk.behme@de.bosch.com/ Fixes: df3ef2d3c92c ("mmc: protect the tmio_mmc driver against a theoretical race") Signed-off-by: Wolfram Sang Tested-by: Dirk Behme Reviewed-by: Dirk Behme Cc: stable@vger.kernel.org # 3.0+ Link: https://lore.kernel.org/r/20240305104423.3177-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function

2024-03-26T22:20:39+00:00

[ Upstream commit ae5004a40a262d329039b99b62bd3fe7645b66ad ] This looks strange to call release_mem_region() in a remove function without any request_mem_region() in the probe or "struct resource" somewhere. So remove the corresponding code. Fixes: 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/bb0bb1ed1e18de55e8c0547625bde271e64b8c31.1708983064.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci-xenon: fix PHY init clock stability

2024-03-06T14:45:11+00:00

commit 8e9f25a290ae0016353c9ea13314c95fb3207812 upstream. Each time SD/mmc phy is initialized, at times, in some of the attempts, phy fails to completes its initialization which results into timeout error. Per the HW spec, it is a pre-requisite to ensure a stable SD clock before a phy initialization is attempted. Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC") Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Elad Nachman Link: https://lore.kernel.org/r/20240222200930.1277665-1-enachman@marvell.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-xenon: add timeout for PHY init complete

2024-03-06T14:45:11+00:00

commit 09e23823ae9a3e2d5d20f2e1efe0d6e48cef9129 upstream. AC5X spec says PHY init complete bit must be polled until zero. We see cases in which timeout can take longer than the standard calculation on AC5X, which is expected following the spec comment above. According to the spec, we must wait as long as it takes for that bit to toggle on AC5X. Cap that with 100 delay loops so we won't get stuck forever. Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC") Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Elad Nachman Link: https://lore.kernel.org/r/20240222191714.1216470-3-enachman@marvell.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: mmci: stm32: fix DMA API overlapping mappings warning

2024-03-06T14:45:11+00:00

commit 6b1ba3f9040be5efc4396d86c9752cdc564730be upstream. Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning: DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST, overlapping mappings aren't supported WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568 add_dma_entry+0x234/0x2f4 Modules linked in: CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1 Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT) Workqueue: events_freezable mmc_rescan Call trace: add_dma_entry+0x234/0x2f4 debug_dma_map_sg+0x198/0x350 __dma_map_sg_attrs+0xa0/0x110 dma_map_sg_attrs+0x10/0x2c sdmmc_idma_prep_data+0x80/0xc0 mmci_prep_data+0x38/0x84 mmci_start_data+0x108/0x2dc mmci_request+0xe4/0x190 __mmc_start_request+0x68/0x140 mmc_start_request+0x94/0xc0 mmc_wait_for_req+0x70/0x100 mmc_send_tuning+0x108/0x1ac sdmmc_execute_tuning+0x14c/0x210 mmc_execute_tuning+0x48/0xec mmc_sd_init_uhs_card.part.0+0x208/0x464 mmc_sd_init_card+0x318/0x89c mmc_attach_sd+0xe4/0x180 mmc_rescan+0x244/0x320 DMA API debug brings to light leaking dma-mappings as dma_map_sg and dma_unmap_sg are not correctly balanced. If an error occurs in mmci_cmd_irq function, only mmci_dma_error function is called and as this API is not managed on stm32 variant, dma_unmap_sg is never called in this error path. Signed-off-by: Christophe Kerello Fixes: 46b723dd867d ("mmc: mmci: add stm32 sdmmc variant") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240207143951.938144-1-christophe.kerello@foss.st.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-pci-o2micro: Fix a warm reboot issue that disk can't be detected by BIOS

2024-02-23T08:12:45+00:00

commit 58aeb5623c2ebdadefe6352b14f8076a7073fea0 upstream. Driver shall switch clock source from DLL clock to OPE clock when power off card to ensure that card can be identified with OPE clock by BIOS. Signed-off-by: Fred Ai Fixes:4be33cf18703 ("mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240203102908.4683-1-fredaibayhubtech@126.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: mmc_spi: remove custom DMA mapped buffers

2024-02-01T00:17:01+00:00

commit 84a6be7db9050dd2601c9870f65eab9a665d2d5d upstream. There is no need to duplicate what SPI core or individual controller drivers already do, i.e. mapping the buffers for DMA capable transfers. Note, that the code, besides its redundancy, was buggy: strictly speaking there is no guarantee, while it's true for those which can use this code (see below), that the SPI host controller _is_ the device which does DMA. Also see the Link tags below. Additional notes. Currently only two SPI host controller drivers may use premapped (by the user) DMA buffers: - drivers/spi/spi-au1550.c - drivers/spi/spi-fsl-spi.c Both of them have DMA mapping support code. I don't expect that SPI host controller code is worse than what has been done in mmc_spi. Hence I do not expect any regressions here. Otherwise, I'm pretty much sure these regressions have to be fixed in the respective drivers, and not here. That said, remove all related pieces of DMA mapping code from mmc_spi. Link: https://lore.kernel.org/linux-mmc/c73b9ba9-1699-2aff-e2fd-b4b4f292a3ca@raspberrypi.org/ Link: https://stackoverflow.com/questions/67620728/mmc-spi-issue-not-able-to-setup-mmc-sd-card-in-linux Signed-off-by: Andy Shevchenko Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231207221901.3259962-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci_omap: Fix TI SoC dependencies

2024-01-25T23:27:38+00:00

[ Upstream commit 09f164d393a6671e5ff8342ba6b3cb7fe3f20208 ] The sdhci_omap is specific to older TI SoCs, update the dependencies for those SoCs and compile testing. While we're at it update the text to reflect the wider range of supported TI SoCS the driver now supports. Fixes: 7d326930d352 ("mmc: sdhci-omap: Add OMAP SDHCI driver") Signed-off-by: Peter Robinson Link: https://lore.kernel.org/r/20231220135950.433588-2-pbrobinson@gmail.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci_am654: Fix TI SoC dependencies

2024-01-25T23:27:37+00:00

[ Upstream commit cb052da7f031b0d2309a4895ca236afb3b4bbf50 ] The sdhci_am654 is specific to recent TI SoCs, update the dependencies for those SoCs and compile testing. While we're at it update the text to reflect the wider range of supported TI SoCS the driver now supports. Fixes: 41fd4caeb00b ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver") Signed-off-by: Peter Robinson Link: https://lore.kernel.org/r/20231220135950.433588-1-pbrobinson@gmail.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin