kernel/linux.git/drivers/mmc/host, branch v6.1.124

mmc: sdhci-tegra: Remove SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC quirk

2024-12-27T12:52:55+00:00

commit a56335c85b592cb2833db0a71f7112b7d9f0d56b upstream. Value 0 in ADMA length descriptor is interpreted as 65536 on new Tegra chips, remove SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC quirk to make sure max ADMA2 length is 65536. Fixes: 4346b7c7941d ("mmc: tegra: Add Tegra186 support") Cc: stable@vger.kernel.org Signed-off-by: Prathamesh Shete Acked-by: Thierry Reding Acked-by: Adrian Hunter Message-ID: <20241209101009.22710-1-pshete@nvidia.com> Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: mtk-sd: Fix error handle of probe function

2024-12-14T18:54:52+00:00

commit 291220451c775a054cedc4fab4578a1419eb6256 upstream. In the probe function, it goes to 'release_mem' label and returns after some procedure failure. But if the clocks (partial or all) have been enabled previously, they would not be disabled in msdc_runtime_suspend, since runtime PM is not yet enabled for this case. That cause mmc related clocks always on during system suspend and block suspend flow. Below log is from a SDCard issue of MT8196 chromebook, it returns -ETIMEOUT while polling clock stable in the msdc_ungate_clock() and probe failed, but the enabled clocks could not be disabled anyway. [ 129.059253] clk_chk_dev_pm_suspend() [ 129.350119] suspend warning: msdcpll is on [ 129.354494] [ck_msdc30_1_sel : enabled, 1, 1, 191999939, ck_msdcpll_d2] [ 129.362787] [ck_msdcpll_d2 : enabled, 1, 1, 191999939, msdcpll] [ 129.371041] [ck_msdc30_1_ck : enabled, 1, 1, 191999939, ck_msdc30_1_sel] [ 129.379295] [msdcpll : enabled, 1, 1, 383999878, clk26m] Add a new 'release_clk' label and reorder the error handle functions to make sure the clocks be disabled after probe failure. Fixes: ffaea6ebfe9c ("mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling") Fixes: 7a2fa8eed936 ("mmc: mtk-sd: use devm_mmc_alloc_host") Signed-off-by: Andy-ld Lu Reviewed-by: AngeloGioacchino Del Regno Cc: stable@vger.kernel.org Message-ID: <20241107121215.5201-1-andy-ld.lu@mediatek.com> Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10 tablet

2024-12-14T18:54:36+00:00

commit 7f0fa47ceebcff0e3591bb7e32a71a2cd7846149 upstream. The Vexia Edu Atla 10 tablet distributed to schools in the Spanish Andalucía region has no ACPI fwnode associated with the SDHCI controller for its microsd-slot and thus has no ACPI GPIO resource info. This causes the following error to be logged and the slot to not work: [ 10.572113] sdhci-pci 0000:00:12.0: failed to setup card detect gpio Add a DMI quirk table for providing gpiod_lookup_tables with manually provided CD GPIO info and use this DMI table to provide the CD GPIO info on this tablet. This fixes the microsd-slot not working. Signed-off-by: Hans de Goede Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Message-ID: <20241118210049.311079-1-hdegoede@redhat.com> Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: mmc_spi: drop buggy snprintf()

2024-12-14T18:53:20+00:00

[ Upstream commit 328bda09cc91b3d93bc64f4a4dadc44313dd8140 ] GCC 13 complains about the truncated output of snprintf(): drivers/mmc/host/mmc_spi.c: In function ‘mmc_spi_response_get’: drivers/mmc/host/mmc_spi.c:227:64: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=] 227 | snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s", | ^ drivers/mmc/host/mmc_spi.c:227:9: note: ‘snprintf’ output between 26 and 43 bytes into a destination of size 32 227 | snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 228 | cmd->opcode, maptype(cmd)); Drop it and fold the string it generates into the only place where it's emitted - the dev_dbg() call at the end of the function. Fixes: 15a0580ced08 ("mmc_spi host driver") Suggested-by: Christophe JAILLET Signed-off-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20241008160134.69934-1-brgl@bgdev.pl Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sunxi-mmc: Fix A100 compatible description

2024-11-22T14:37:32+00:00

commit 85b580afc2c215394e08974bf033de9face94955 upstream. It turns out that the Allwinner A100/A133 SoC only supports 8K DMA blocks (13 bits wide), for both the SD/SDIO and eMMC instances. And while this alone would make a trivial fix, the H616 falls back to the A100 compatible string, so we have to now match the H616 compatible string explicitly against the description advertising 64K DMA blocks. As the A100 is now compatible with the D1 description, let the A100 compatible string point to that block instead, and introduce an explicit match against the H616 string, pointing to the old description. Also remove the redundant setting of clk_delays to NULL on the way. Fixes: 3536b82e5853 ("mmc: sunxi: add support for A100 mmc controller") Cc: stable@vger.kernel.org Signed-off-by: Andre Przywara Tested-by: Parthiban Nallathambi Reviewed-by: Chen-Yu Tsai Message-ID: <20241107014240.24669-1-andre.przywara@arm.com> Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

Revert "mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K"

2024-11-22T14:37:31+00:00

commit 1635e407a4a64d08a8517ac59ca14ad4fc785e75 upstream. The commit 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K") increased the max_req_size, even for 4K pages, causing various issues: - Panic booting the kernel/rootfs from an SD card on Rockchip RK3566 - Panic booting the kernel/rootfs from an SD card on StarFive JH7100 - "swiotlb buffer is full" and data corruption on StarFive JH7110 At this stage no fix have been found, so it's probably better to just revert the change. This reverts commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890. Cc: stable@vger.kernel.org Cc: Sam Protsenko Fixes: 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K") Closes: https://lore.kernel.org/linux-mmc/614692b4-1dbe-31b8-a34d-cb6db1909bb7@w6rz.net/ Closes: https://lore.kernel.org/linux-mmc/CAC8uq=Ppnmv98mpa1CrWLawWoPnu5abtU69v-=G-P7ysATQ2Pw@mail.gmail.com/ Signed-off-by: Aurelien Jarno Message-ID: <20241110114700.622372-1-aurelien@aurel32.net> Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: cqhci: Fix checking of CQHCI_HALT state

2024-09-12T09:10:17+00:00

commit aea62c744a9ae2a8247c54ec42138405216414da upstream. To check if mmc cqe is in halt state, need to check set/clear of CQHCI_HALT bit. At this time, we need to check with &, not &&. Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Cc: stable@vger.kernel.org Signed-off-by: Seunghwan Baek Reviewed-by: Ritesh Harjani Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20240829061823.3718-2-sh8267.baek@samsung.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-of-aspeed: fix module autoloading

2024-09-12T09:10:17+00:00

commit 6e540da4c1db7b840e347c4dfe48359b18b7e376 upstream. Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen Acked-by: Andrew Jeffery Fixes: bb7b8ec62dfb ("mmc: sdhci-of-aspeed: Add support for the ASPEED SD controller") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240826124851.379759-1-liaochen4@huawei.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K

2024-09-12T09:10:17+00:00

commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890 upstream. Commit 616f87661792 ("mmc: pass queue_limits to blk_mq_alloc_disk") [1] revealed the long living issue in dw_mmc.c driver, existing since the time when it was first introduced in commit f95f3850f7a9 ("mmc: dw_mmc: Add Synopsys DesignWare mmc host driver."), also making kernel boot broken on platforms using dw_mmc driver with 16K or 64K pages enabled, with this message in dmesg: mmcblk: probe of mmc0:0001 failed with error -22 That's happening because mmc_blk_probe() fails when it calls blk_validate_limits() consequently, which returns the error due to failed max_segment_size check in this code: /* * The maximum segment size has an odd historic 64k default that * drivers probably should override. Just like the I/O size we * require drivers to at least handle a full page per segment. */ ... if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE)) return -EINVAL; In case when IDMAC (Internal DMA Controller) is used, dw_mmc.c always sets .max_seg_size to 4 KiB: mmc->max_seg_size = 0x1000; The comment in the code above explains why it's incorrect. Arnd suggested setting .max_seg_size to .max_req_size to fix it, which is also what some other drivers are doing: $ grep -rl 'max_seg_size.*=.*max_req_size' drivers/mmc/host/ | \ wc -l 18 This change is not only fixing the boot with 16K/64K pages, but also leads to a better MMC performance. The linear write performance was tested on E850-96 board (eMMC only), before commit [1] (where it's possible to boot with 16K/64K pages without this fix, to be able to do a comparison). It was tested with this command: # dd if=/dev/zero of=somefile bs=1M count=500 oflag=sync Test results are as follows: - 4K pages, .max_seg_size = 4 KiB: 94.2 MB/s - 4K pages, .max_seg_size = .max_req_size = 512 KiB: 96.9 MB/s - 16K pages, .max_seg_size = 4 KiB: 126 MB/s - 16K pages, .max_seg_size = .max_req_size = 2 MiB: 128 MB/s - 64K pages, .max_seg_size = 4 KiB: 138 MB/s - 64K pages, .max_seg_size = .max_req_size = 8 MiB: 138 MB/s Unfortunately, SD card controller is not enabled in E850-96 yet, so it wasn't possible for me to run the test on some cheap SD cards to check this patch's impact on those. But it's possible that this change might also reduce the writes count, thus improving SD/eMMC longevity. All credit for the analysis and the suggested solution goes to Arnd. [1] https://lore.kernel.org/all/20240215070300.2200308-18-hch@lst.de/ Fixes: f95f3850f7a9 ("mmc: dw_mmc: Add Synopsys DesignWare mmc host driver.") Suggested-by: Arnd Bergmann Reported-by: Linux Kernel Functional Testing Closes: https://lore.kernel.org/all/CA+G9fYtddf2Fd3be+YShHP6CmSDNcn0ptW8qg+stUKW+Cn0rjQ@mail.gmail.com/ Signed-off-by: Sam Protsenko Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240306232052.21317-1-semen.protsenko@linaro.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: mtk-sd: receive cmd8 data when hs400 tuning fail

2024-09-04T11:24:58+00:00

[ Upstream commit 9374ae912dbb1eed8139ed75fd2c0f1b30ca454d ] When we use cmd8 as the tuning command in hs400 mode, the command response sent back by some eMMC devices cannot be correctly sampled by MTK eMMC controller at some weak sample timing. In this case, command timeout error may occur. So we must receive the following data to make sure the next cmd8 send correctly. Signed-off-by: Mengqi Zhang Fixes: c4ac38c6539b ("mmc: mtk-sd: Add HS400 online tuning support") Cc: stable@vger.stable.com Link: https://lore.kernel.org/r/20240716013704.10578-1-mengqi.zhang@mediatek.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin