kernel/linux.git/drivers/mmc/host, branch v5.15.209

mmc: vub300: fix NULL-deref on disconnect

2026-04-18T08:33:37+00:00

commit dff34ef879c5e73298443956a8b391311ba78d57 upstream. Make sure to deregister the controller before dropping the reference to the driver data on disconnect to avoid NULL-pointer dereferences or use-after-free. Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Johan Hovold Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: fix timing selection for 1-bit bus width

2026-04-18T08:33:17+00:00

commit 5e3486e64094c28a526543f1e8aa0d5964b7f02d upstream. When 1-bit bus width is used with HS200/HS400 capabilities set, mmc_select_hs200() returns 0 without actually switching. This causes mmc_select_timing() to skip mmc_select_hs(), leaving eMMC in legacy mode (26MHz) instead of High Speed SDR (52MHz). Per JEDEC eMMC spec section 5.3.2, 1-bit mode supports High Speed SDR. Drop incompatible HS200/HS400/UHS/DDR caps early so timing selection falls through to mmc_select_hs() correctly. Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure") Signed-off-by: Luke Wang Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-pci-gli: fix GL9750 DMA write corruption

2026-04-18T08:33:17+00:00

commit 2b76e0cc7803e5ab561c875edaba7f6bbd87fbb0 upstream. The GL9750 SD host controller has intermittent data corruption during DMA write operations. The GM_BURST register's R_OSRC_Lmt field (bits 17:16), which limits outstanding DMA read requests from system memory, is not being cleared during initialization. The Windows driver sets R_OSRC_Lmt to zero, limiting requests to the smallest unit. Clear R_OSRC_Lmt to match the Windows driver behavior. This eliminates write corruption verified with f3write/f3read tests while maintaining DMA performance. Cc: stable@vger.kernel.org Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support") Closes: https://lore.kernel.org/linux-mmc/33d12807-5c72-41ce-8679-57aa11831fad@linux.dev/ Acked-by: Adrian Hunter Signed-off-by: Matthew Schwartz Reviewed-by: Ben Chuang Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: mmci: Fix device_node reference leak in of_get_dml_pipe_index()

2026-04-18T08:33:14+00:00

commit af12e64ae0661546e8b4f5d30d55c5f53a11efe7 upstream. When calling of_parse_phandle_with_args(), the caller is responsible to call of_node_put() to release the reference of device node. In of_get_dml_pipe_index(), it does not release the reference. Fixes: 9cb15142d0e3 ("mmc: mmci: Add qcom dml support to the driver.") Signed-off-by: Felix Gu Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

Revert "mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms"

2026-03-04T12:19:46+00:00

[ Upstream commit ff112f1ecd10b72004eac05bae395e1c65f0c63c ] This reverts commit aced969e9bf3701dc75cfca57c78c031b7875b9d. It was determined that this was not the correct "fix", so should be reverted. Fixes: aced969e9bf3 ("mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms") Cc: Matthew Schwartz Cc: Ulf Hansson Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms

2026-03-04T12:19:46+00:00

[ Upstream commit aced969e9bf3701dc75cfca57c78c031b7875b9d ] The existing 1ms delay in sd_power_on is insufficient and causes resume errors around 4% of the time. Increasing the delay to 5ms resolves this issue after testing 300 s2idle cycles. Fixes: 1f311c94aabd ("mmc: rtsx: add 74 Clocks in power on flow") Signed-off-by: Matthew Schwartz Link: https://patch.msgid.link/20260105060236.400366-3-matthew.schwartz@linux.dev Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

mmc: rtsx_pci_sdmmc: implement sdmmc_card_busy function

2026-02-06T15:41:56+00:00

commit 122610220134b32c742cc056eaf64f7017ac8cd9 upstream. rtsx_pci_sdmmc does not have an sdmmc_card_busy function, so any voltage switches cause a kernel warning, "mmc0: cannot verify signal voltage switch." Copy the sdmmc_card_busy function from rtsx_pci_usb to rtsx_pci_sdmmc to fix this. Fixes: ff984e57d36e ("mmc: Add realtek pcie sdmmc host driver") Signed-off-by: Matthew Schwartz Tested-by: Ricky WU Reviewed-by: Ricky WU Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-msm: Avoid early clock doubling during HS400 transition

2026-01-19T12:09:48+00:00

commit b1f856b1727c2eaa4be2c6d7cd7a8ed052bbeb87 upstream. According to the hardware programming guide, the clock frequency must remain below 52MHz during the transition to HS400 mode. However,in the current implementation, the timing is set to HS400 (a DDR mode) before adjusting the clock. This causes the clock to double prematurely to 104MHz during the transition phase, violating the specification and potentially resulting in CRC errors or CMD timeouts. This change ensures that clock doubling is avoided during intermediate transitions and is applied only when the card requires a 200MHz clock for HS400 operation. Signed-off-by: Sarthak Garg Reviewed-by: Bjorn Andersson Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-esdhc-imx: add alternate ARCH_S32 dependency to Kconfig

2026-01-19T12:09:46+00:00

commit d3ecb12e2e04ce53c95f933c462f2d8b150b965b upstream. MMC_SDHCI_ESDHC_IMX requires ARCH_MXC despite also being used on ARCH_S32, which results in unmet dependencies when compiling strictly for ARCH_S32. Resolve this by adding ARCH_S32 as an alternative to ARCH_MXC in the driver's dependencies. Fixes: 5c4f00627c9a ("mmc: sdhci-esdhc-imx: add NXP S32G2 support") Cc: stable@bvger.kernel.org Signed-off-by: Jared Kangas Reviewed-by: Haibo Chen Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-of-dwcmshc: Change DLL_STRBIN_TAPNUM_DEFAULT to 0x4

2025-12-06T21:09:32+00:00

[ Upstream commit a28352cf2d2f8380e7aca8cb61682396dca7a991 ] strbin signal delay under 0x8 configuration is not stable after massive test. The recommandation of it should be 0x4. Signed-off-by: Shawn Lin Tested-by: Alexey Charkov Tested-by: Hugh Cole-Baker Fixes: 08f3dff799d4 ("mmc: sdhci-of-dwcmshc: add rockchip platform support") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman