kernel/linux.git/drivers/mmc/core, branch v6.1.124

mmc: core: Add SD card quirk for broken poweroff notification

2024-12-14T18:54:38+00:00

[ Upstream commit cd068d51594d9635bf6688fc78717572b78bce6a ] GIGASTONE Gaming Plus microSD cards manufactured on 02/2022 report that they support poweroff notification and cache, but they are not working correctly. Flush Cache bit never gets cleared in sd_flush_cache() and Poweroff Notification Ready bit also never gets set to 1 within 1 second from the end of busy of CMD49 in sd_poweroff_notify(). This leads to I/O error and runtime PM error state. I observed that the same card manufactured on 01/2024 works as expected. This problem seems similar to the Kingston cards fixed with commit c467c8f08185 ("mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019") and should be handled using quirks. CID for the problematic card is here. 12345641535443002000000145016200 Manufacturer ID is 0x12 and defined as CID_MANFID_GIGASTONE as of now, but would like comments on what naming is appropriate because MID list is not public and not sure it's right. Signed-off-by: Keita Aihara Link: https://lore.kernel.org/r/20240913094417.GA4191647@sony.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: Further prevent card detect during shutdown

2024-12-14T18:54:36+00:00

commit 87a0d90fcd31c0f36da0332428c9e1a1e0f97432 upstream. Disabling card detect from the host's ->shutdown_pre() callback turned out to not be the complete solution. More precisely, beyond the point when the mmc_bus->shutdown() has been called, to gracefully power off the card, we need to prevent card detect. Otherwise the mmc_rescan work may poll for the card with a CMD13, to see if it's still alive, which then will fail and hang as the card has already been powered off. To fix this problem, let's disable mmc_rescan prior to power off the card during shutdown. Reported-by: Anthony Pighin Fixes: 66c915d09b94 ("mmc: core: Disable card detect during shutdown") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Reviewed-by: Adrian Hunter Closes: https://lore.kernel.org/all/BN0PR08MB695133000AF116F04C3A9FFE83212@BN0PR08MB6951.namprd08.prod.outlook.com/ Tested-by: Anthony Pighin Message-ID: <20241125122446.18684-1-ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman

mmc: core: apply SD quirks earlier during probe

2024-09-12T09:10:17+00:00

commit 469e5e4713989fdd5e3e502b922e7be0da2464b9 upstream. Applying MMC_QUIRK_BROKEN_SD_CACHE is broken, as the card's SD quirks are referenced in sd_parse_ext_reg_perf() prior to the quirks being initialized in mmc_blk_probe(). To fix this problem, let's split out an SD-specific list of quirks and apply in mmc_sd_init_card() instead. In this way, sd_read_ext_regs() to has the available information for not assigning the SD_EXT_PERF_CACHE as one of the (un)supported features, which in turn allows mmc_sd_init_card() to properly skip execution of sd_enable_cache(). Fixes: c467c8f08185 ("mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019") Signed-off-by: Jonathan Bell Co-developed-by: Keita Aihara Signed-off-by: Keita Aihara Reviewed-by: Dragan Simic Reviewed-by: Avri Altman Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240820230631.GA436523@sony.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: Avoid open coding by using mmc_op_tuning()

2024-09-04T11:24:58+00:00

[ Upstream commit b98e7e8daf0ebab9dcc36812378a71e1be0b5089 ] Replace code with the already defined function. No functional changes. Signed-off-by: ChanWoo Lee Reviewed-by: Adrian Hunter Link: https://lore.kernel.org/r/20221124080031.14690-1-cw9316.lee@samsung.com Signed-off-by: Ulf Hansson Stable-dep-of: 9374ae912dbb ("mmc: mtk-sd: receive cmd8 data when hs400 tuning fail") Signed-off-by: Sasha Levin

mmc: mmc_test: Fix NULL dereference on allocation failure

2024-08-29T15:30:48+00:00

[ Upstream commit a1e627af32ed60713941cbfc8075d44cad07f6dd ] If the "test->highmem = alloc_pages()" allocation fails then calling __free_pages(test->highmem) will result in a NULL dereference. Also change the error code to -ENOMEM instead of returning success. Fixes: 2661081f5ab9 ("mmc_test: highmem tests") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/8c90be28-67b4-4b0d-a105-034dc72a0b31@stanley.mountain Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: Add mmc_gpiod_set_cd_config() function

2024-06-16T11:41:35+00:00

commit 63a7cd660246aa36af263b85c33ecc6601bf04be upstream. Some mmc host drivers may need to fixup a card-detection GPIO's config to e.g. enable the GPIO controllers builtin pull-up resistor on devices where the firmware description of the GPIO is broken (e.g. GpioInt with PullNone instead of PullUp in ACPI DSDT). Since this is the exception rather then the rule adding a config parameter to mmc_gpiod_request_cd() seems undesirable, so instead add a new mmc_gpiod_set_cd_config() function. This is simply a wrapper to call gpiod_set_config() on the card-detect GPIO acquired through mmc_gpiod_request_cd(). Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-2-hdegoede@redhat.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: core: Do not force a retune before RPMB switch

2024-06-16T11:41:31+00:00

commit 67380251e8bbd3302c64fea07f95c31971b91c22 upstream. Requesting a retune before switching to the RPMB partition has been observed to cause CRC errors on the RPMB reads (-EILSEQ). Since RPMB reads can not be retried, the clients would be directly affected by the errors. This commit disables the retune request prior to switching to the RPMB partition: mmc_retune_pause() no longer triggers a retune before the pause period begins. This was verified with the sdhci-of-arasan driver (ZynqMP) configured for HS200 using two separate eMMC cards (DG4064 and 064GB2). In both cases, the error was easy to reproduce triggering every few tenths of reads. With this commit, systems that were utilizing OP-TEE to access RPMB variables will experience an enhanced performance. Specifically, when OP-TEE is configured to employ RPMB as a secure storage solution, it not only writes the data but also the secure filesystem within the partition. As a result, retrieving any variable involves multiple RPMB reads, typically around five. For context, on ZynqMP, each retune request consumed approximately 8ms. Consequently, reading any RPMB variable used to take at the very minimum 40ms. After droping the need to retune before switching to the RPMB partition, this is no longer the case. Signed-off-by: Jorge Ramirez-Ortiz Acked-by: Avri Altman Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20240103112911.2954632-1-jorge@foundries.io Signed-off-by: Ulf Hansson Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman

mmc: core: Add HS400 tuning in HS400es initialization

2024-05-25T14:21:30+00:00

commit 77e01b49e35f24ebd1659096d5fc5c3b75975545 upstream. During the initialization to HS400es stage, add a HS400 tuning flow as an optional process. For Mediatek IP, the HS400es mode requires a specific tuning to ensure the correct HS400 timing setting. Signed-off-by: Mengqi Zhang Link: https://lore.kernel.org/r/20231225093839.22931-2-mengqi.zhang@mediatek.com Signed-off-by: Ulf Hansson Cc: "Lin Gui (桂林)" Signed-off-by: Greg Kroah-Hartman

mmc: core: Avoid negative index with array access

2024-04-03T13:19:49+00:00

commit cf55a7acd1ed38afe43bba1c8a0935b51d1dc014 upstream. Commit 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") assigns prev_idata = idatas[i - 1], but doesn't check that the iterator i is greater than zero. Let's fix this by adding a check. Fixes: 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") Link: https://lore.kernel.org/all/20231129092535.3278-1-avri.altman@wdc.com/ Cc: stable@vger.kernel.org Signed-off-by: Mikko Rapeli Reviewed-by: Avri Altman Tested-by: Francesco Dolcini Link: https://lore.kernel.org/r/20240313133744.2405325-2-mikko.rapeli@linaro.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: core: Initialize mmc_blk_ioc_data

2024-04-03T13:19:49+00:00

commit 0cdfe5b0bf295c0dee97436a8ed13336933a0211 upstream. Commit 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") adds flags uint to struct mmc_blk_ioc_data, but it does not get initialized for RPMB ioctls which now fails. Let's fix this by always initializing the struct and flags to zero. Fixes: 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218587 Link: https://lore.kernel.org/all/20231129092535.3278-1-avri.altman@wdc.com/ Cc: stable@vger.kernel.org Signed-off-by: Mikko Rapeli Reviewed-by: Avri Altman Acked-by: Adrian Hunter Tested-by: Francesco Dolcini Link: https://lore.kernel.org/r/20240313133744.2405325-1-mikko.rapeli@linaro.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman