kernel/linux.git/drivers/mmc/core, branch v4.19.112

mmc: core: fix wl1251 sdio quirks

2020-01-27T13:51:21+00:00

[ Upstream commit 16568b4a4f0c34bd35cfadac63303c7af7812764 ] wl1251 and wl1271 have different vendor id and device id. So we need to handle both with sdio quirks. Fixes: 884f38607897 ("mmc: core: move some sdio IDs out of quirks file") Signed-off-by: H. Nikolaus Schaller Cc: # v4.11+ Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: fix possible use after free of host

2020-01-27T13:50:45+00:00

[ Upstream commit 8e1943af2986db42bee2b8dddf49a36cdb2e9219 ] In the function mmc_alloc_host, the function put_device is called to release allocated resources when mmc_gpio_alloc fails. Finally, the function pointed by host->class_dev.class->dev_release (i.e., mmc_host_classdev_release) is used to release resources including the host structure. However, after put_device, host is used and released again. Resulting in a use-after-free bug. Fixes: 1ed217194488 ("mmc: core: fix error path in mmc_host_alloc") Signed-off-by: Pan Bian Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: block: Add CMD13 polling for MMC IOCTLS with R1B response

2019-12-21T09:57:21+00:00

commit a0d4c7eb71dd08a89ad631177bb0cbbabd598f84 upstream. MMC IOCTLS with R1B responses may cause the card to enter the busy state, which means it's not ready to receive a new request. To prevent new requests from being sent to the card, use a CMD13 polling loop to verify that the card returns to the transfer state, before completing the request. Signed-off-by: Chaotian Jing Reviewed-by: Avri Altman Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: block: Make card_busy_detect() a bit more generic

2019-12-21T09:57:20+00:00

commit 3869468e0c4800af52bfe1e0b72b338dcdae2cfc upstream. To prepare for more users of card_busy_detect(), let's drop the struct request * as an in-parameter and convert to log the error message via dev_err() instead of pr_err(). Signed-off-by: Chaotian Jing Reviewed-by: Avri Altman Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: core: align max segment size with logical block size

2019-12-05T08:21:13+00:00

[ Upstream commit c53336c8f5f29043fded57912cc06c24e12613d7 ] Logical block size is the lowest possible block size that the storage device can address. Max segment size is often related with controller's DMA capability. And it is reasonable to align max segment size with logical block size. SDHCI sets un-aligned max segment size, and causes ADMA error, so fix it by aligning max segment size with logical block size. Reported-by: Naresh Kamboju Cc: Christoph Hellwig Cc: Naresh Kamboju Cc: Faiz Abbas Cc: linux-block@vger.kernel.org Signed-off-by: Ming Lei Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: Clarify sdio_irq_pending flag for MMC_CAP2_SDIO_IRQ_NOTHREAD

2019-10-05T11:09:56+00:00

[ Upstream commit 36d57efb4af534dd6b442ea0b9a04aa6dfa37abe ] The sdio_irq_pending flag is used to let host drivers indicate that it has signaled an IRQ. If that is the case and we only have a single SDIO func that have claimed an SDIO IRQ, our assumption is that we can avoid reading the SDIO_CCCR_INTx register and just call the SDIO func irq handler immediately. This makes sense, but the flag is set/cleared in a somewhat messy order, let's fix that up according to below. First, the flag is currently set in sdio_run_irqs(), which is executed as a work that was scheduled from sdio_signal_irq(). To make it more implicit that the host have signaled an IRQ, let's instead immediately set the flag in sdio_signal_irq(). This also makes the behavior consistent with host drivers that uses the legacy, mmc_signal_sdio_irq() API. This have no functional impact, because we don't expect host drivers to call sdio_signal_irq() until after the work (sdio_run_irqs()) have been executed anyways. Second, currently we never clears the flag when using the sdio_run_irqs() work, but only when using the sdio_irq_thread(). Let make the behavior consistent, by moving the flag to be cleared inside the common process_sdio_pending_irqs() function. Additionally, tweak the behavior of the flag slightly, by avoiding to clear it unless we processed the SDIO IRQ. The purpose with this at this point, is to keep the information about whether there have been an SDIO IRQ signaled by the host, so at system resume we can decide to process it without reading the SDIO_CCCR_INTx register. Tested-by: Matthias Kaehlcke Reviewed-by: Matthias Kaehlcke Signed-off-by: Ulf Hansson Reviewed-by: Douglas Anderson Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: Fix init of SD cards reporting an invalid VDD range

2019-09-06T08:22:17+00:00

commit 72741084d903e65e121c27bd29494d941729d4a1 upstream. The OCR register defines the supported range of VDD voltages for SD cards. However, it has turned out that some SD cards reports an invalid voltage range, for example having bit7 set. When a host supports MMC_CAP2_FULL_PWR_CYCLE and some of the voltages from the invalid VDD range, this triggers the core to run a power cycle of the card to try to initialize it at the lowest common supported voltage. Obviously this fails, since the card can't support it. Let's fix this problem, by clearing invalid bits from the read OCR register for SD cards, before proceeding with the VDD voltage negotiation. Cc: stable@vger.kernel.org Reported-by: Philip Langdale Signed-off-by: Ulf Hansson Reviewed-by: Philip Langdale Tested-by: Philip Langdale Tested-by: Manuel Presnitz Signed-off-by: Greg Kroah-Hartman

mmc: core: complete HS400 before checking status

2019-07-14T06:11:13+00:00

[ Upstream commit b0e370b95a3b231d0fb5d1958cce85ef57196fe6 ] We don't have a reproducible error case, yet our BSP team suggested that the mmc_switch_status() command in mmc_select_hs400() should come after the callback into the driver completing HS400 setup. It makes sense to me because we want the status of a fully setup HS400, so it will increase the reliability of the mmc_switch_status() command. Reported-by: Yoshihiro Shimoda Signed-off-by: Wolfram Sang Fixes: ba6c7ac3a2f4 ("mmc: core: more fine-grained hooks for HS400 tuning") Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: Prevent processing SDIO IRQs when the card is suspended

2019-06-25T03:35:53+00:00

commit 83293386bc95cf5e9f0c0175794455835bd1cb4a upstream. Processing of SDIO IRQs must obviously be prevented while the card is system suspended, otherwise we may end up trying to communicate with an uninitialized SDIO card. Reports throughout the years shows that this is not only a theoretical problem, but a real issue. So, let's finally fix this problem, by keeping track of the state for the card and bail out before processing the SDIO IRQ, in case the card is suspended. Cc: stable@vger.kernel.org Reported-by: Douglas Anderson Tested-by: Douglas Anderson Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()

2019-06-25T03:35:53+00:00

commit b4c9f938d542d5f88c501744d2d12fad4fd2915f upstream. We want SDIO drivers to be able to temporarily stop retuning when the driver knows that the SDIO card is not in a state where retuning will work (maybe because the card is asleep). We'll move the relevant functions to a place where drivers can call them. Cc: stable@vger.kernel.org #v4.18+ Signed-off-by: Douglas Anderson Acked-by: Adrian Hunter Acked-by: Kalle Valo Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman