kernel/linux.git/drivers/mmc/core/sd_ops.c, branch linux-7.0.y

mmc: core: Support UHS-II card control and access

2024-10-24T12:22:24+00:00

Embed UHS-II access/control functionality into the MMC request processing flow. Signed-off-by: Jason Lai Signed-off-by: Victor Shih Message-ID: <20241018105333.4569-2-victorshihgli@gmail.com> [Ulf: A couple of cleanups and fixed sd_uhs2_power_off()] Signed-off-by: Ulf Hansson

mmc: sd: Add Extension memory addressing

2024-10-14T10:29:01+00:00

SDUC memory addressing spans beyond 2TB and up to 128TB. Therefore, 38 bits are required to access the entire memory space of all sectors. Those extra 6 bits are to be carried by CMD22 prior of sending read/write/erase commands: CMD17, CMD18, CMD24, CMD25, CMD32, and CMD33. CMD22 will carry the higher order 6 bits, and must precedes any of the above commands even if it targets sector < 2TB. No error related to address or length is indicated in CMD22 but rather in the read/write command itself. Tested-by: Ricky WU Reviewed-by: Adrian Hunter Signed-off-by: Avri Altman Link: https://lore.kernel.org/r/20241006051148.160278-3-avri.altman@wdc.com Signed-off-by: Ulf Hansson

mmc: core: Replace the argument of mmc_sd_switch() with defines

2024-09-03T12:14:51+00:00

Replace with already defined values for readability. While at it, let's also change the mode-parameter from an int to bool, as the only used values are 0 or 1. Signed-off-by: Chanwoo Lee Link: https://lore.kernel.org/r/20240829024709.402285-1-cw9316.lee@samsung.com Signed-off-by: Ulf Hansson

mmc: core: Increase the timeout period of the ACMD41 command

2024-05-03T12:28:27+00:00

Extensive testing has shown that some specific SD cards require an increased command timeout to be successfully initialized. More info: Platform: Rockchip SoC + DW Multimedia host Controller SD card: Xvv microSD CMH34A17TMA12 (Made in Korea) Note: The SD card is custom-made by the customer in collaboration with the wafer foundry. Signed-off-by: Felix Qin Acked-by: Avri Altman Reviewed-by: Dragan Simic Link: https://lore.kernel.org/r/20240429071955.163282-1-xiaokeqinhealth@126.com Signed-off-by: Ulf Hansson

mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too

2024-05-03T12:27:55+00:00

Similar to what has already been changed for eMMC and the MMC_SEND_OP_COND (CMD1), let's convert the SD_APP_OP_COND (ACMD41) for SD cards to use the common __mmc_poll_for_busy() too. This change means the initial delay period, that starts as 10ms will now increase for every loop when being busy. The total accepted timeout for being busy is 1s, which is according to the SD spec. Signed-off-by: Ulf Hansson Acked-by: Felix Qin Reviewed-by: Dragan Simic Link: https://lore.kernel.org/r/20240425133034.79599-1-ulf.hansson@linaro.org

mmc: core: Add host specific tuning support for SD HS mode

2023-08-25T09:45:51+00:00

To support the need for host specific tuning for SD high-speed mode, let's add two new optional callbacks, ->prepare|execute_sd_hs_tuning() and let's call them when switching into the SD high-speed mode. Note that, during the tuning process it's also needed for host drivers to send commands to the SD card to verify that the tuning process succeeds. Therefore, let's also share the corresponding functions from the core to allow this. Signed-off-by: Wenchao Chen Link: https://lore.kernel.org/r/20230825091743.15613-2-wenchao.chen@unisoc.com [Ulf: Dropped unnecessary function declarations and updated the commit msg] Signed-off-by: Ulf Hansson

mmc: core: Drop open coding in mmc_sd_switch()

2021-06-14T11:57:36+00:00

The SD_SWITCH (CMD6) is an ADTC type of command with an R1 response, which can be sent by using the mmc_send_adtc_data(). Let's do that and drop the open coding in mmc_sd_switch(). Signed-off-by: Ulf Hansson Reviewed-by: Linus Walleij Reviewed-by: Shawn Lin Acked-by: Avri Altman Link: https://lore.kernel.org/r/20210504161222.101536-8-ulf.hansson@linaro.org

mmc: core: Initial support for SD express card/host

2020-11-16T10:59:28+00:00

In the SD specification v7.10 the SD express card has been added. This new type of removable SD card, can be managed via a PCIe/NVMe based interface, while also allowing backwards compatibility towards the legacy SD interface. To keep the backwards compatibility, it's required to start the initialization through the legacy SD interface. If it turns out that the mmc host and the SD card, both supports the PCIe/NVMe interface, then a switch should be allowed. Therefore, let's introduce some basic support for this type of SD cards to the mmc core. The mmc host, should set MMC_CAP2_SD_EXP if it supports this interface and MMC_CAP2_SD_EXP_1_2V, if also 1.2V is supported, as to inform the core about it. To deal with the switch to the PCIe/NVMe interface, the mmc host is required to implement a new host ops, ->init_sd_express(). Based on the initial communication between the host and the card, host->ios.timing is set to either MMC_TIMING_SD_EXP or MMC_TIMING_SD_EXP_1_2V, depending on if 1.2V is supported or not. In this way, the mmc host can check these values in its ->init_sd_express() ops, to know how to proceed with the handover. Note that, to manage card insert/removal, the mmc core sticks with using the ->get_cd() callback, which means it's the host's responsibility to make sure it provides valid data, even if the card may be managed by PCIe/NVMe at the moment. As long as the card seems to be present, the mmc core keeps the card powered on. Cc: Greg Kroah-Hartman Cc: Arnd Bergmann Cc: Christoph Hellwig Cc: Rui Feng Signed-off-by: Ulf Hansson Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/1603936636-3126-1-git-send-email-rui_feng@realsil.com.cn

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

mmc: core: Drop retries as in-parameter to mmc_wait_for_app_cmd()

2019-02-25T14:20:58+00:00

All callers of mmc_wait_for_app_cmd() set the retries in-parameter to MMC_CMD_RETRIES. This is silly, so let's just drop the in-parameter altogether, as to simplify the code. Signed-off-by: Ulf Hansson