kernel/linux.git/drivers/mmc/core/sd.c, branch linux-7.0.y

mmc: core: Skip to set the default 200mA SD current limit

2025-10-23T14:07:21+00:00

Let's avoid updating the SD current limit when the maximum power is 200mA (0.72W) or less, as this is already the default value for the SD card. In this way we avoid sending an unnecessary command during initialization. Signed-off-by: Avri Altman Signed-off-by: Ulf Hansson

mmc: use octal file permissions instead of symbolic

2025-10-21T11:37:38+00:00

As stated in Documentation/dev-tools/checkpatch.rst, octal file permissions are preferred over symbolic constants because they are easier to read and understand. Replace symbolic permissions with their octal equivalents. Signed-off-by: Pedro Demarchi Gomes Signed-off-by: Ulf Hansson

mmc: core: Parse and use the new max-sd-hs-hz DT property

2025-09-12T12:49:36+00:00

Introduce a new device tree flag to cap the maximum High-Speed (HS) mode frequency for SD cards, accommodating board-specific electrical limitations which cannot support the default 50Mhz HS frequency and others. Signed-off-by: Sarthak Garg Signed-off-by: Ulf Hansson

mmc: rename mmc_host_uhs() to mmc_host_can_uhs()

2025-05-14T15:07:48+00:00

It is not obvious that this functions checks capabilities. Rename it to include '_can' like other capability helpers. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20250501063325.7262-9-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson

mmc: core: Add support for graceful host removal for SD

2025-05-14T14:59:16+00:00

An mmc host driver may allow to unbind from its corresponding host device. If an SD card is attached to the host, the mmc core will just try to cut the power for it, without obeying to the SD spec that potentially may damage the card. Let's fix this problem by implementing a graceful power-down of the card at host removal. Reviewed-by: Wolfram Sang Tested-by: Wolfram Sang Signed-off-by: Ulf Hansson Link: https://lore.kernel.org/r/20250407152759.25160-6-ulf.hansson@linaro.org

mmc: Add quirk to disable DDR50 tuning

2025-05-14T14:59:16+00:00

Adds the MMC_QUIRK_NO_UHS_DDR50_TUNING quirk and updates mmc_execute_tuning() to return 0 if that quirk is set. This fixes an issue on certain Swissbit SD cards that do not support DDR50 tuning where tuning requests caused I/O errors to be thrown. Signed-off-by: Erick Shepherd Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20250331221337.1414534-1-erick.shepherd@ni.com Signed-off-by: Ulf Hansson

mmc: core: Trim trailing whitespace from card product names

2025-03-12T10:30:22+00:00

Product names for some eMMC chips can include trailing whitespace, which seems to be rather uncommon, but makes emitted messages and /sys properties somewhat unsightly. Here's such an example from a Pine64 PineNote, in which "Biwin ", as the eMMC product name, contains trailing whitespace: mmc0: new HS200 MMC card at address 0001 mmcblk0: mmc0:0001 Biwin 115 GiB mmcblk0: p1 p2 p3 p4 p5 p6 p7 mmcblk0boot0: mmc0:0001 Biwin 4.00 MiB mmcblk0boot1: mmc0:0001 Biwin 4.00 MiB mmcblk0rpmb: mmc0:0001 Biwin 4.00 MiB, chardev (249:0) Trailing whitespace in /sys properties may even cause some unforeseen issues with some scripts, so let's have the trailing whitespace trimmed in product names for eMMC chips. Although not observed yet by the author of these changes, the same trailing whitespace may appear in SD card product names, so let's trim them as well, which can't hurt. Touch-up one comment as well, by using proper capitalization. Signed-off-by: Dragan Simic Acked-by: Avri Altman Link: https://lore.kernel.org/r/fb7fcecae737f3e8b279854d7c853000527cba9a.1740597891.git.dsimic@manjaro.org Signed-off-by: Ulf Hansson

mmc: core: Support UHS-II card control and access

2024-10-24T12:22:24+00:00

Embed UHS-II access/control functionality into the MMC request processing flow. Signed-off-by: Jason Lai Signed-off-by: Victor Shih Message-ID: <20241018105333.4569-2-victorshihgli@gmail.com> [Ulf: A couple of cleanups and fixed sd_uhs2_power_off()] Signed-off-by: Ulf Hansson

mmc: core: Enable SDUC

2024-10-14T10:40:10+00:00

Enable SDUC if the card responded to ACMD41 with HCS & HO2T bits set. Reviewed-by: Adrian Hunter Signed-off-by: Avri Altman Link: https://lore.kernel.org/r/20241006051148.160278-11-avri.altman@wdc.com Signed-off-by: Ulf Hansson

mmc: core: Prevent HSQ from enabling for SDUC

2024-10-14T10:40:09+00:00

hsq allows to get more in-flight requests from mmc core, which can be prepared in advance and be issued asynchronously to the completion of the preceding request (in atomic context). This is presumably broken though by the mandatory CMD22 for SDUC. We plan to make it work, but only as an improvement on top of the initial support for SDUC. Signed-off-by: Avri Altman Link: https://lore.kernel.org/r/20241006051148.160278-10-avri.altman@wdc.com Signed-off-by: Ulf Hansson