kernel/linux.git/drivers/mmc/core/core.c, branch v6.1

mmc: core: Fix ambiguous TRIM and DISCARD arg

2022-11-18T09:39:22+00:00

Clean up the MMC_TRIM_ARGS define that became ambiguous with DISCARD introduction. While at it, let's fix one usage where MMC_TRIM_ARGS falsely included DISCARD too. Fixes: b3bf915308ca ("mmc: core: new discard feature support at eMMC v4.5") Signed-off-by: Christian Loehle Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/11376b5714964345908f3990f17e0701@hyperstone.com Signed-off-by: Ulf Hansson

mmc: core: properly select voltage range without power cycle

2022-11-16T12:58:01+00:00

In mmc_select_voltage(), if there is no full power cycle, the voltage range selected at the end of the function will be on a single range (e.g. 3.3V/3.4V). To keep a range around the selected voltage (3.2V/3.4V), the mask shift should be reduced by 1. This issue was triggered by using a specific SD-card (Verbatim Premium 16GB UHS-1) on an STM32MP157C-DK2 board. This board cannot do UHS modes and there is no power cycle. And the card was failing to switch to high-speed mode. When adding the range 3.2V/3.3V for this card with the proposed shift change, the card can switch to high-speed mode. Fixes: ce69d37b7d8f ("mmc: core: Prevent violation of specs while initializing cards") Signed-off-by: Yann Gautier Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221028073740.7259-1-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson

treewide: use prandom_u32_max() when possible, part 1

2022-10-11T23:42:55+00:00

Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman Reviewed-by: Kees Cook Reviewed-by: Yury Norov Reviewed-by: KP Singh Reviewed-by: Jan Kara # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder # for drbd Acked-by: Jakub Kicinski Acked-by: Heiko Carstens # for s390 Acked-by: Ulf Hansson # for mmc Acked-by: Darrick J. Wong # for xfs Signed-off-by: Jason A. Donenfeld

mmc: core: Capture eMMC and SD card errors

2022-07-12T10:25:34+00:00

Add changes to capture eMMC and SD card errors. This is useful for debug and testing. Signed-off-by: Liangliang Lu Signed-off-by: Sayali Lokhande Signed-off-by: Bao D. Nguyen Signed-off-by: Ram Prakash Gupta Signed-off-by: Shaik Sajida Bhanu Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/1653674036-21829-2-git-send-email-quic_c_sbhanu@quicinc.com Signed-off-by: Ulf Hansson

mmc: improve API to make clear hw_reset callback is for cards

2022-04-26T12:05:20+00:00

To make it unambiguous that the hw_reset callback is for cards and not for controllers, we add 'card' to the callback name and convert all users in one go. We keep the argument as mmc_host, though, because the callback is used very early when mmc_card is not yet populated. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220408080045.6497-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson

mmc: core: improve API to make clear that mmc_sw_reset is for cards

2022-04-26T12:05:20+00:00

To make it unambiguous that mmc_sw_reset() is for cards and not for controllers, we make the function argument mmc_card instead of mmc_host. There are no users to convert currently. Suggested-by: Ulf Hansson Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220408080045.6497-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson

mmc: core: improve API to make clear mmc_hw_reset is for cards

2022-04-08T09:00:08+00:00

To make it unambiguous that mmc_hw_reset() is for cards and not for controllers, we make the function argument mmc_card instead of mmc_host. Also, all users are converted. Suggested-by: Ulf Hansson Signed-off-by: Wolfram Sang Acked-by: Kalle Valo Link: https://lore.kernel.org/r/20220408080045.6497-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson

mmc: core: Disable card detect during shutdown

2021-12-20T10:09:15+00:00

It's seems prone to problems by allowing card detect and its corresponding mmc_rescan() work to run, during platform shutdown. For example, we may end up turning off the power while initializing a card, which potentially could damage it. To avoid this scenario, let's add ->shutdown_pre() callback for the mmc host class device and then turn of the card detect from there. Reported-by: Al Cooper Suggested-by: Adrian Hunter Signed-off-by: Ulf Hansson Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211203141555.105351-1-ulf.hansson@linaro.org

Merge tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2021-08-31T21:31:10+00:00

Pull MMC and MEMSTICK updates from Ulf Hansson: "MMC core: - Return a proper response in case of an ioctl error - Issue HPI to interrupt BKOPS for eMMC if it timed out - Avoid hogging the CPU while polling for busy - Extend sd8787 pwrseq to support the wilc1000 SDIO - Remove a couple of confusing warning messages - Clarify comment for ->card_busy() host ops MMC host: - dw_mmc: Add data CRC error injection - mmci: De-assert reset during ->probe() - rtsx_pci: Fix long reads when clock is pre-scaled - sdhci: Correct the tuning command handle for PIO mode - sdhci-esdhc-imx: Improve support for auto tuning - sdhci-msm: Add support for the sc7280 - sdhci-of-arasan: Don't auto tune for DDR50 mode for ZynqMP - sdhci-of-arasan: Enable support for auto cmd12 - sdhci-of-arasan: Use 19MHz for SD default speed for ZynqMP for level shifter - usdhi6rol0: Implement the ->card_busy() host ops MEMSTICK: - A couple of minor cleanups" * tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits) mmc: queue: Remove unused parameters(request_queue) mmc: pwrseq: sd8787: fix compilation warning mmc: core: Return correct emmc response in case of ioctl error mmc: sdhci-esdhc-imx: Select the correct mode for auto tuning mmc: sdhci-esdhc-imx: Remove redundant code for manual tuning mmc: core: Issue HPI in case the BKOPS timed out mmc: queue: Match the data type of max_segments mmc: switch from 'pci_' to 'dma_' API memstick: switch from 'pci_' to 'dma_' API memstick: r592: Change the name of the 'pci_driver' structure to be consistent mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787 mmc: pwrseq: sd8787: add support for wilc1000 dt-bindings: mmc: Extend pwrseq-sd8787 binding for wilc1000 dt-bindings: mmc: fsl-imx-esdhc: change the pinctrl-names rule dt-bindings: mmc: fsl-imx-esdhc: add a new compatible string dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning mmc: core: Update ->card_busy() callback comment mmc: usdhi6rol0: Implement card_busy function mmc: sdhci: Correct the tuning command handle for PIO mode ...

mmc: block: Support alternative_gpt_sector() operation

2021-08-24T16:09:06+00:00

Support generic alternative_gpt_sector() block device operation. It calculates location of GPT entry for eMMC of NVIDIA Tegra Android devices. Add new MMC_CAP2_ALT_GPT_TEGRA flag that enables scanning of alternative GPT sector and add raw_boot_mult field to mmc_ext_csd which allows to get size of the boot partitions that is needed for the calculation. Signed-off-by: Dmitry Osipenko Reviewed-by: Ulf Hansson Link: https://lore.kernel.org/r/20210820004536.15791-4-digetx@gmail.com Signed-off-by: Jens Axboe