kernel/linux.git/drivers/mmc/core/block.c, branch v6.4

mmc: block: ensure error propagation for non-blk

2023-05-09T09:16:15+00:00

Requests to the mmc layer usually come through a block device IO. The exceptions are the ioctl interface, RPMB chardev ioctl and debugfs, which issue their own blk_mq requests through blk_execute_rq and do not query the BLK_STS error but the mmcblk-internal drv_op_result. This patch ensures that drv_op_result defaults to an error and has to be overwritten by the operation to be considered successful. The behavior leads to a bug where the request never propagates the error, e.g. by directly erroring out at mmc_blk_mq_issue_rq if mmc_blk_part_switch fails. The ioctl caller of the rpmb chardev then can never see an error (BLK_STS_IOERR, but drv_op_result is unchanged) and thus may assume that their call executed successfully when it did not. While always checking the blk_execute_rq return value would be advised, let's eliminate the error by always setting drv_op_result as -EIO to be overwritten on success (or other error) Fixes: 614f0388f580 ("mmc: block: move single ioctl() commands to block requests") Signed-off-by: Christian Loehle Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/59c17ada35664b818b7bd83752119b2d@hyperstone.com Signed-off-by: Ulf Hansson

mmc: core: Remove unused macro mmc_req_rel_wr

2023-04-17T07:47:25+00:00

There is no user for macro mmc_req_rel_wr, so delete it. Signed-off-by: Bean Huo Link: https://lore.kernel.org/r/20230403221754.16168-1-beanhuo@iokpp.de Signed-off-by: Ulf Hansson

mmc: core: Align to common busy polling behaviour for mmc ioctls

2023-02-15T12:24:03+00:00

Let's align to the common busy polling behaviour for mmc ioctls, by updating the below two corresponding parts, that comes into play when using an R1B response for a command. *) A command with an R1B response should be prepared by calling mmc_prepare_busy_cmd(), which make us respects the host's busy timeout constraints. **) When an R1B response is being used and the host also supports HW busy detection, we should skip to poll for busy completion. Suggested-by: Christian Loehle Signed-off-by: Ulf Hansson Reviewed-by: Christian Loehle Link: https://lore.kernel.org/r/20230213133707.27857-1-ulf.hansson@linaro.org

mmc: core: Remove non-data R1B ioctl workaround

2022-12-07T12:29:13+00:00

The workaround of pretending R1B non-data transfers are data transfers in order for the busy timeout to be respected by the host controller driver is removed. It wasn't useful in a long time. Initially the workaround ensured that R1B commands did not time out by setting the data timeout to be the command timeout in commit cb87ea28ed9e ("mmc: core: Add mmc CMD+ACMD passthrough ioctl"). This was moved inside an if-clause with idata->buf_bytes being set in commit 4d6144de8ba2 ("mmc: core: check for zero length ioctl data"). Since the workaround is now inside the idata->buf_bytes clause and intended to fix R1B non-data transfers, that do not have buf_bytes set, we can remove the workaround altogether. This was dead code, since data transfers doesn't use R1B commands. Signed-off-by: Christian Loehle Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/57d4aceb25254e448bd3e575bd99b0c2@hyperstone.com Signed-off-by: Ulf Hansson

mmc: block: Remove error check of hw_reset on reset

2022-10-17T09:51:33+00:00

Before switching back to the right partition in mmc_blk_reset there used to be a check if hw_reset was even supported. This return value was removed, so there is no reason to check. Furthermore ensure part_curr is not falsely set to a valid value on reset or partition switch error. As part of this change the code paths of mmc_blk_reset calls were checked to ensure no commands are issued after a failed mmc_blk_reset directly without going through the block layer. Fixes: fefdd3c91e0a ("mmc: core: Drop superfluous validations in mmc_hw|sw_reset()") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle Reviewed-by: Adrian Hunter Link: https://lore.kernel.org/r/e91be6199d04414a91e20611c81bfe1d@hyperstone.com Signed-off-by: Ulf Hansson

mmc: core: Add SD card quirk for broken discard

2022-10-06T11:31:13+00:00

Some SD-cards from Sandisk that are SDA-6.0 compliant reports they supports discard, while they actually don't. This might cause mk2fs to fail while trying to format the card and revert it to a read-only mode. To fix this problem, let's add a card quirk (MMC_QUIRK_BROKEN_SD_DISCARD) to indicate that we shall fall-back to use the legacy erase command instead. Signed-off-by: Avri Altman Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220928095744.16455-1-avri.altman@wdc.com [Ulf: Updated the commit message] Signed-off-by: Ulf Hansson

Merge tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2022-08-05T02:41:09+00:00

Pull MMC updates from Ulf Hansson: "MMC core: - Add support for the asynchronous SDIO wakeup interrupts - Skip redundant evaluation of eMMC HS400 caps when no-MMC-cap - Add support to store error stats from host drivers - Extend debugfs to show error stats from host drivers - Add single I/O read support in the recovery path for 4k sector cards MMC host: - dw_mmc-exynos: Convert corresponding DT bindings to the dtschema - dw_mmc-rockchip: Add support for the Rockchip RV1126 variant - mmc_spi: Convert corresponding DT bindings to the dtschema - mtk-sd: Extend support for interrupts/pinctrls for SDIO low-power mode - mtk-sd: Add support for SDIO wake irqs - mtk-sd: Add support for the Mediatek MT8188 variant - renesas_sdhi: Drop redundant manual tap correction for newer SoCs - renesas_sdhi: Add support for the R-Car S4-8 and generic Gen4 variants - sdhci/cqhci: Add support to capture stats from host errors - sdhci-brcmstb: Add ability to increase max clock rate for SDIO on 72116b0 - sdhci-msm: Add support for the MSM8998 and SM8450 variant - sdhci-of-at91: Fixup UHS-I mode by rewriting of MC1R - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant - sdhci-of-dwcmshc: Enable reset support for the Rockchip variants - sdhci-pci-gli: Improve I/O read/write performance for GL9763E - sdhci-s3c: Convert corresponding DT bindings to the dtschema - tmio: Avoid glitches when resetting MEMSTICK core: - A couple of minor fixes and cleanups" * tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (61 commits) mmc: mediatek: add support for SDIO eint wakup IRQ mmc: core: Add support for SDIO wakeup interrupt dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126 mmc: renesas_sdhi: newer SoCs don't need manual tap correction mmc: cavium-thunderx: Add of_node_put() when breaking out of loop mmc: cavium-octeon: Add of_node_put() when breaking out of loop mmc: core: quirks: Add of_node_put() when breaking out of loop mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume dt-bindings: mmc: sdhci-msm: Document the SM8450 compatible mmc: sdhci-msm: drop redundant of_device_id entries dt-bindings: mmc: sdhci-msm: add MSM8998 mmc: block: Add single read for 4k sector cards mmc: mxcmmc: Use mmc_card_sdio macro mmc: core: Use mmc_card_* macro and add a new for the sd_combo type dt-bindings: mmc: sdhci-msm: constrain reg-names per variants dt-bindings: mmc: sdhci-msm: fix reg-names entries dt-bindings: mmc: Add compatible for MediaTek MT8188 dt-bindings: mmc: sdhci-msm: document resets mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R ...

mmc: fix disk/queue leak in case of adding disk failure

2022-07-18T19:12:11+00:00

In case of adding disk failure, the disk needs to be released, otherwise disk/queue is leaked. Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20220718160851.312972-1-ming.lei@redhat.com Signed-off-by: Jens Axboe

mmc: block: Add single read for 4k sector cards

2022-07-13T11:10:50+00:00

Cards with 4k native sector size may only be read 4k-aligned, accommodate for this in the single read recovery and use it. Fixes: 81196976ed946 (mmc: block: Add blk-mq support) Signed-off-by: Christian Loehle Acked-by: Adrian Hunter Reviewed-by: Avri Altman Link: https://lore.kernel.org/r/cf4f316274c5474586d0d99b17db4a4c@hyperstone.com Signed-off-by: Ulf Hansson

mmc: core: Use mmc_card_* macro and add a new for the sd_combo type

2022-07-13T10:44:41+00:00

Add mmc_card_sd_combo() macro for sd combo type card and use the mmc_card_* macro to simplify code instead of comparing card->type. Signed-off-by: Seunghui Lee Link: https://lore.kernel.org/r/20220713033635.28432-2-sh043.lee@samsung.com Signed-off-by: Ulf Hansson