kernel/linux.git/drivers/misc, branch v6.1.124

misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycle

2024-12-14T18:54:49+00:00

[ Upstream commit 7738a7ab9d12c5371ed97114ee2132d4512e9fd5 ] Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before reading data from the EEPROM. The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing of the op-code/address from the host to the EEPROM and the reading of the actual data from the EEPROM. More info can be found on page 6 of the AT93C46 datasheet (linked below). Similar notes are found in other 93xx6 datasheets. In summary the read operation for a 93Cx6 EEPROM is: Write to EEPROM: 110[A5-A0] (9 bits) Read from EEPROM: 0[D15-D0] (17 bits) Where: 110 is the start bit and READ OpCode [A5-A0] is the address to read from 0 is a "dummy bit" preceding the actual data [D15-D0] is the actual data. Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy bit should be clocked out on the last address bit clock cycle meaning it should be discarded naturally. However, depending on the hardware configuration sometimes this dummy bit is not discarded. This is the case with Exar PCI UARTs which require an extra clock cycle between sending the address and reading the data. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf Reviewed-by: Andy Shevchenko Signed-off-by: Parker Newman Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

misc: apds990x: Fix missing pm_runtime_disable()

2024-12-14T18:53:53+00:00

[ Upstream commit 3c5d8b819d27012264edd17e6ae7fffda382fe44 ] The pm_runtime_disable() is missing in probe error path, so add it to fix it. Fixes: 92b1f84d46b2 ("drivers/misc: driver for APDS990X ALS and proximity sensors") Signed-off-by: Jinjie Ruan Link: https://lore.kernel.org/r/20240923035556.3009105-1-ruanjinjie@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

misc: sgi-gru: Don't disable preemption in GRU driver

2024-11-08T15:26:44+00:00

[ Upstream commit b983b271662bd6104d429b0fd97af3333ba760bf ] Disabling preemption in the GRU driver is unnecessary, and clashes with sleeping locks in several code paths. Remove preempt_disable and preempt_enable from the GRU driver. Signed-off-by: Dimitri Sivanich Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

eeprom: digsy_mtc: Fix 93xx46 driver probe failure

2024-09-18T17:23:04+00:00

[ Upstream commit 2b82641ad0620b2d71dc05024b20f82db7e1c0b6 ] The update to support other (bigger) types of EEPROMs broke the driver loading due to removal of the default size. Fix this by adding the respective (new) flag to the platform data. Fixes: 14374fbb3f06 ("misc: eeprom_93xx46: Add new 93c56 and 93c66 compatible strings") Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240508184905.2102633-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

VMCI: Fix use-after-free when removing resource in vmci_resource_remove()

2024-09-12T09:10:27+00:00

commit 48b9a8dabcc3cf5f961b2ebcd8933bf9204babb7 upstream. When removing a resource from vmci_resource_table in vmci_resource_remove(), the search is performed using the resource handle by comparing context and resource fields. It is possible though to create two resources with different types but same handle (same context and resource fields). When trying to remove one of the resources, vmci_resource_remove() may not remove the intended one, but the object will still be freed as in the case of the datagram type in vmci_datagram_destroy_handle(). vmci_resource_table will still hold a pointer to this freed resource leading to a use-after-free vulnerability. BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239 __kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425 kasan_report+0x38/0x51 mm/kasan/report.c:442 vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182 ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444 kref_put include/linux/kref.h:65 [inline] vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline] vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195 vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143 __fput+0x261/0xa34 fs/file_table.c:282 task_work_run+0xf0/0x194 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187 exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220 __syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline] syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313 do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0x0 This change ensures the type is also checked when removing the resource from vmci_resource_table in vmci_resource_remove(). Fixes: bc63dedb7d46 ("VMCI: resource object implementation.") Cc: stable@vger.kernel.org Reported-by: George Kennedy Signed-off-by: David Fernandez Gonzalez Link: https://lore.kernel.org/r/20240828154338.754746-1-david.fernandez.gonzalez@oracle.com Signed-off-by: Greg Kroah-Hartman

mei: demote client disconnect warning on suspend to debug

2024-07-25T07:49:12+00:00

[ Upstream commit 1db5322b7e6b58e1b304ce69a50e9dca798ca95b ] Change level for the "not connected" client message in the write callback from error to debug. The MEI driver currently disconnects all clients upon system suspend. This behavior is by design and user-space applications with open connections before the suspend are expected to handle errors upon resume, by reopening their handles, reconnecting, and retrying their operations. However, the current driver implementation logs an error message every time a write operation is attempted on a disconnected client. Since this is a normal and expected flow after system resume logging this as an error can be misleading. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20240530091415.725247-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

misc: fastrpc: Copy the complete capability structure to user

2024-07-18T11:18:42+00:00

commit e7f0be3f09c6e955dc8009129862b562d8b64513 upstream. User is passing capability ioctl structure(argp) to get DSP capabilities. This argp is copied to a local structure to get domain and attribute_id information. After getting the capability, only capability value is getting copied to user argp which will not be useful if the use is trying to get the capability by checking the capability member of fastrpc_ioctl_capability structure. Copy the complete capability structure so that user can get the capability value from the expected member of the structure. Fixes: 6c16fd8bdd40 ("misc: fastrpc: Add support to get DSP capabilities") Cc: stable Signed-off-by: Ekansh Gupta Reviewed-by: Dmitry Baryshkov Reviewed-by: Caleb Connolly Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240628114501.14310-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

misc: fastrpc: Avoid updating PD type for capability request

2024-07-18T11:18:42+00:00

commit bfb6b07d2a30ffe98864d8cfc31fc00470063025 upstream. When user is requesting for DSP capability, the process pd type is getting updated to USER_PD which is incorrect as DSP will assume the process which is making the request is a user PD and this will never get updated back to the original value. The actual PD type should not be updated for capability request and it should be serviced by the respective PD on DSP side. Don't change process's PD type for DSP capability request. Fixes: 6c16fd8bdd40 ("misc: fastrpc: Add support to get DSP capabilities") Cc: stable Signed-off-by: Ekansh Gupta Reviewed-by: Caleb Connolly Signed-off-by: Srinivas Kandagatla Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20240628114501.14310-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

misc: fastrpc: Fix DSP capabilities request

2024-07-18T11:18:42+00:00

commit 4cb7915f0a35e2fcc4be60b912c4be35cd830957 upstream. The DSP capability request call expects 2 arguments. First is the information about the total number of attributes to be copied from DSP and second is the information about the buffer where the DSP needs to copy the information. The current design is passing the information about the size to be copied from DSP which would be considered as a bad argument to the call by DSP causing a failure suggesting the same. The second argument carries the information about the buffer where the DSP needs to copy the capability information and the size to be copied. As the first entry of capability attribute is getting skipped, same should also be considered while sending the information to DSP. Add changes to pass proper arguments to DSP. Fixes: 6c16fd8bdd40 ("misc: fastrpc: Add support to get DSP capabilities") Cc: stable Signed-off-by: Ekansh Gupta Reviewed-by: Dmitry Baryshkov Reviewed-by: Caleb Connolly Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240628114501.14310-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

misc: microchip: pci1xxxx: Fix a memory leak in the error handling of gp_aux_bus_probe()

2024-06-21T12:36:01+00:00

[ Upstream commit 77427e3d5c353e3dd98c7c0af322f8d9e3131ace ] There is a memory leak (forget to free allocated buffers) in a memory allocation failure path. Fix it to jump to the correct error handling code. Fixes: 393fc2f5948f ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.") Signed-off-by: Yongzhi Liu Reviewed-by: Kumaravel Thiagarajan Link: https://lore.kernel.org/r/20240523121434.21855-4-hyperlyzcs@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin