kernel/linux.git/drivers/misc/mei, branch v3.18.62

mei: txe: don't clean an unprocessed interrupt cause.

2016-11-24T03:49:04+00:00

[ Upstream commit 43605e293eb13c07acb546c14f407a271837af17 ] SEC registers are not accessible when the TXE device is in low power state, hence the SEC interrupt cannot be processed if device is not awake. In some rare cases entrance to low power state (aliveness off) and input ready bits can be signaled at the same time, resulting in communication stall as input ready won't be signaled again after waking up. To resolve this IPC_HHIER_SEC bit in HHISR_REG should not be cleaned if the interrupt is not processed. Cc: stable@vger.kernel.org Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

mei: me: wait for power gating exit confirmation

2015-07-04T03:02:29+00:00

[ Upstream commit 3dc196eae1db548f05e53e5875ff87b8ff79f249 ] Fix the hbm power gating state machine so it will wait till it receives confirmation interrupt for the PG_ISOLATION_EXIT message. In process of the suspend flow the devices first have to exit from the power gating state (runtime pm resume). If we do not handle the confirmation interrupt after sending PG_ISOLATION_EXIT message, we may receive it already after the suspend flow has changed the device state and interrupt will be interpreted as a spurious event, consequently link reset will be invoked which will prevent the device from completing the suspend flow kernel: [6603] mei_reset:136: mei_me 0000:00:16.0: powering down: end of reset kernel: [476] mei_me_irq_thread_handler:643: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing. kernel: mei_me 0000:00:16.0: FW not ready: resetting Cc: #3.18+ Cc: Gabriele Mazzotta Link: https://bugzilla.kernel.org/show_bug.cgi?id=86241 Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770397 Tested-by: Gabriele Mazzotta Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

mei: txe: reduce suspend/resume time

2015-07-04T03:02:19+00:00

[ Upstream commit fe292283c23329218e384bffc6cb4bfa3fd92277 ] HW has to be in known state before the initialisation sequence is started. The polling step for settling aliveness was set to 200ms while in practise this can be done in up to 30msecs. Cc: #3.18+ Signed-off-by: Tomas Winkler Signed-off-by: Barak Yoresh Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

mei: make device disabled on stop unconditionally

2015-03-14T19:37:21+00:00

commit 6c15a8516b8118eb19a59fd0bd22df41b9101c32 upstream. Set the internal device state to to disabled after hardware reset in stop flow. This will cover cases when driver was not brought to disabled state because of an error and in stop flow we wish not to retry the reset. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Sasha Levin

mei: me: release hw from reset only during the reset flow

2015-03-06T22:53:00+00:00

commit 663b7ee9517eec6deea9a48c7a1392a9a34f7809 upstream. We might enter the interrupt handler with hw_ready already set, but prior we actually started the reset flow. To soleve this we move the reset release from the interrupt handler to the HW start wait function which is part of the reset sequence. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

mei: mask interrupt set bit on clean reset bit

2015-03-06T22:52:59+00:00

commit 1ab1e79b9fd4b01331490bbe2e630a0fc0b25449 upstream. We should mask interrupt set bit when writing back hcsr value in reset bit clean-up. This is refinement for mei: clean reset bit before reset commit b13a65ef190e488e2761d65bdd2e1fe8a3a125f5 Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

mei: clean reset bit before reset

2015-01-27T16:29:41+00:00

commit b13a65ef190e488e2761d65bdd2e1fe8a3a125f5 upstream. H_RST bit in H_CSR register may be found lit before reset is started, for example if preceding reset flow hasn't completed. In that case asserting H_RST will be ignored, therefore we need to clean H_RST bit to start a successful reset sequence. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

Merge tag 'char-misc-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2014-10-08T10:55:41+00:00

Pull char/misc driver updates from Greg KH: "Here's the big set of driver patches for char/misc drivers. Nothing major in here, the shortlog goes into the details. All have been in the linux-next tree for a while with no issues" * tag 'char-misc-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (80 commits) mei: mei_txe_fw_sts can be static mei: fix kernel-doc warnings mei: fix KDoc documentation formatting mei: drop me_client_presentation_num mei: trivial: fix errors in prints in comments mei: remove include to pci header from mei module files mei: push pci cfg structure me hw mei: remove the reference to pdev from mei_device mei: move fw_status back to hw ops handlers mei: get rid of most of the pci dependencies in mei mei: push all standard settings into mei_device_init mei: move mei_hbm_hdr function from hbm.h the hbm.c mei: kill error message for allocation failure mei: nfc: fix style warning mei: fix style warning: Missing a blank line after declarations mei: pg: fix cat and paste error in comments mei: debugfs: add single buffer indicator mei: debugfs: adjust print buffer mei: add hbm and pg state in devstate debugfs print Drivers: hv: vmbus: Enable interrupt driven flow control ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2014-10-08T01:16:26+00:00

Pull "trivial tree" updates from Jiri Kosina: "Usual pile from trivial tree everyone is so eagerly waiting for" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Remove MN10300_PROC_MN2WS0038 mei: fix comments treewide: Fix typos in Kconfig kprobes: update jprobe_example.c for do_fork() change Documentation: change "&" to "and" in Documentation/applying-patches.txt Documentation: remove obsolete pcmcia-cs from Changes Documentation: update links in Changes Documentation: Docbook: Fix generated DocBook/kernel-api.xml score: Remove GENERIC_HAS_IOMAP gpio: fix 'CONFIG_GPIO_IRQCHIP' comments tty: doc: Fix grammar in serial/tty dma-debug: modify check_for_stack output treewide: fix errors in printk genirq: fix reference in devm_request_threaded_irq comment treewide: fix synchronize_rcu() in comments checkstack.pl: port to AArch64 doc: queue-sysfs: minor fixes init/do_mounts: better syntax description MIPS: fix comment spelling powerpc/simpleboot: fix comment ...

mei: mei_txe_fw_sts can be static

2014-09-30T01:21:46+00:00

CC: Tomas Winkler Signed-off-by: Fengguang Wu Signed-off-by: Greg Kroah-Hartman