kernel/linux.git/drivers/mfd/dln2.c, branch v6.18.21

mfd: dln2: Fix double put in dln2_probe

2023-11-01T10:02:13+00:00

The dln2_free() already contains usb_put_dev(). Therefore, the redundant usb_put_dev() before dln2_free() may lead to a double free. Fixes: 96da8f148396 ("mfd: dln2: Fix memory leak in dln2_probe()") Signed-off-by: Dinghao Liu Link: https://lore.kernel.org/r/20230925024134.9683-1-dinghao.liu@zju.edu.cn Signed-off-by: Lee Jones

mfd: dln2: Remove the unneeded include

2023-06-15T08:19:36+00:00

This driver does not use i2c, so there is no point in including Remove it. Signed-off-by: Christophe JAILLET Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/baf28e7f0fb57e918b76eaa92b94a2ae1a02cce0.1682318879.git.christophe.jaillet@wanadoo.fr

mfd: dln2: Fix memory leak in dln2_probe()

2023-04-26T10:40:34+00:00

When dln2_setup_rx_urbs() in dln2_probe() fails, error out_free forgets to call usb_put_dev() to decrease the refcount of dln2->usb_dev. Fix this by adding usb_put_dev() in the error handling code of dln2_probe(). Signed-off-by: Qiang Ning Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20230330024353.4503-1-qning0106@126.com

mfd: dln2: Automatically detect and fill endpoint pointers

2022-07-19T09:54:40+00:00

The usb_find_common_endpoints() finds and fills the endpoints in accordance with their types. Use it to automatically detect and fill endpoint pointers. Signed-off-by: Andy Shevchenko Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20220617182338.32402-1-andriy.shevchenko@linux.intel.com

mfd: dln2: Add cell for initializing DLN2 ADC

2021-11-05T14:40:27+00:00

This patch extends the DLN2 driver; adding cell for adc_dln2 module. The original patch[1] fell through the cracks when the driver was added so ADC has never actually been usable. That patch did not have ACPI support which was added in v5.9, so the oldest supported version this current patch can be backported to is 5.10. [1] https://www.spinics.net/lists/linux-iio/msg33975.html Cc: # 5.10+ Signed-off-by: Jack Andersen Signed-off-by: Noralf Trønnes Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20211018112541.25466-1-noralf@tronnes.org

mfd: dln2: Run event handler loop under spinlock

2020-08-13T06:50:56+00:00

The event handler loop must be run with interrupts disabled. Otherwise we will have a warning: [ 1970.785649] irq 31 handler lineevent_irq_handler+0x0/0x20 enabled interrupts [ 1970.792739] WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x162/0x170 [ 1970.860732] RIP: 0010:__handle_irq_event_percpu+0x162/0x170 ... [ 1970.946994] Call Trace: [ 1970.949446] [ 1970.951471] handle_irq_event_percpu+0x2c/0x80 [ 1970.955921] handle_irq_event+0x23/0x43 [ 1970.959766] handle_simple_irq+0x57/0x70 [ 1970.963695] generic_handle_irq+0x42/0x50 [ 1970.967717] dln2_rx+0xc1/0x210 [dln2] [ 1970.971479] ? usb_hcd_unmap_urb_for_dma+0xa6/0x1c0 [ 1970.976362] __usb_hcd_giveback_urb+0x77/0xe0 [ 1970.980727] usb_giveback_urb_bh+0x8e/0xe0 [ 1970.984837] tasklet_action_common.isra.0+0x4a/0xe0 ... Recently xHCI driver switched to tasklets in the commit 36dc01657b49 ("usb: host: xhci: Support running urb giveback in tasklet context"). The handle_irq_event_* functions are expected to be called with interrupts disabled and they rightfully complain here because we run in tasklet context with interrupts enabled. Use a event spinlock to protect event handler from being interrupted. Note, that there are only two users of this GPIO and ADC drivers and both of them are using generic_handle_irq() which makes above happen. Fixes: 338a12814297 ("mfd: Add support for Diolan DLN-2 devices") Signed-off-by: Andy Shevchenko Signed-off-by: Lee Jones

mfd: dln2: Allow to be enumerated via ACPI

2020-03-30T06:35:28+00:00

On some platforms user may want to enumerate DLN2 device, its children, to be enumerated via ACPI. In order to achieve this, let's distinguish children by _ADR value. Signed-off-by: Andy Shevchenko Signed-off-by: Lee Jones

mfd: dln2: Fix sanity checking for endpoints

2020-03-30T06:35:28+00:00

While the commit 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints") tries to harden the sanity checks it made at the same time a regression, i.e. mixed in and out endpoints. Obviously it should have been not tested on real hardware at that time, but unluckily it didn't happen. So, fix above mentioned typo and make device being enumerated again. While here, introduce an enumerator for magic values to prevent similar issue to happen in the future. Fixes: 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints") Cc: Oliver Neukum Cc: Greg Kroah-Hartman Signed-off-by: Andy Shevchenko Signed-off-by: Lee Jones

mfd: dln2: More sanity checking for endpoints

2020-01-24T07:33:57+00:00

It is not enough to check for the number of endpoints. The types must also be correct. Reported-and-tested-by: syzbot+48a2851be24583b864dc@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Reviewed-by: Greg Kroah-Hartman Signed-off-by: Lee Jones

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372

2019-06-05T15:37:10+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de Signed-off-by: Greg Kroah-Hartman