kernel/linux.git/drivers/mfd/cs42l43.c, branch v7.1

mfd: cs42l43: Add support for the B variant

2026-03-09T10:29:32+00:00

Introducing CS42L43B codec, a variant of CS42L43 which can be driven by the same driver. Changes in CS42L43 driver specific for CS42L43B: - Decimator 1 and 2 are dedicated to ADC, can't be selected for PDM - Decimators 3 and 4 are connected to PDM1 - Added Decimator 5 and 6 for PDM2 - Supports SoundWire Clock Gearing - Updated ROM requiring no patching - Reduced RAM space - Each ISRC has 4 decimators now Signed-off-by: Maciej Strozek Acked-by: Lee Jones Reviewed-by: Charles Keepax Link: https://patch.msgid.link/20260306152829.3130530-4-mstrozek@opensource.cirrus.com Signed-off-by: Mark Brown

mfd: cs42l43: Remove IRQ masking in suspend

2025-10-01T09:28:56+00:00

Now the individual child drivers mask their own IRQs there is no need for the MFD code to do so anymore. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20250903094549.271068-7-ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones

mfd: cs42l43: Move IRQ enable/disable to encompass force suspend

2025-10-01T09:28:55+00:00

As pm_runtime_force_suspend() will force the device state to suspend, the driver needs to ensure no IRQ handlers are currently running. If not those handlers may find they are now running on suspended hardware despite holding a PM runtime reference. disable_irq() will sync any currently running handlers, so move the IRQ disabling to cover the whole of the forced suspend state to avoid such race conditions. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20250903094549.271068-6-ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones

mfd: Remove redundant pm_runtime_mark_last_busy() calls

2025-07-30T07:16:43+00:00

pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(), pm_runtime_autosuspend() and pm_request_autosuspend() now include a call to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to pm_runtime_mark_last_busy(). Signed-off-by: Sakari Ailus Reviewed-by: Charles Keepax Link: https://lore.kernel.org/r/20250704075432.3220321-1-sakari.ailus@linux.intel.com Signed-off-by: Lee Jones

Merge tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2025-01-22T17:16:02+00:00

Pull mfd updates from Lee Jones: - Fix race in device_node_get_regmap() using more extensive locking - Remove unused platform driver support for syscon - Allow syscon nodes to be registered without a "syscon" compatible string - Make `platform_data` pointer const in struct mfd_cell - Revert support for multiple AXP PMICs to avoid regressions - Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO operation - Store the result from fault_log() for use by other sub-components - Fix an invalid regmap-config max_register value - Add another Gemini Lake ISA bridge PCI device ID - Use devm_register_power_off_handler() to simplify code - Add support for QNAP microcontroller units, including LEDs, input, and hwmon - Use MFD_CELL macros and remove unused code - Add support for AAEON UP board FPGA - Remove unused includes - Fix various typos and compatibility issues in multiple bindings - Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424 - Convert several bindings to YAML schema - Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings directly - Fix rohm,bd71815 bindings by correcting resistor values and typos - Documentation improvements: - Add documentation for LED1202 and qnap-mcu-hwmon - Adjust the file entry for the qnap-mcu header in MAINTAINERS * tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (35 commits) MAINTAINERS: Adjust the file entry for the qnap-mcu header dt-bindings: mfd: syscon: Fix ti,j784s4-acspcie-proxy-ctrl compatible dt-bindings: mfd: syscon: Fix al,alpine-sysfabric-service compatible Revert "mfd: axp20x: Allow multiple regulators" dt-bindings: mfd: syscon: Add rk3562 QoS register compatible mfd: syscon: Allow syscon nodes without a "syscon" compatible mfd: syscon: Remove the platform driver support mfd: syscon: Fix race in device_node_get_regmap() dt-bindings: mfd: atmel: Convert to YAML schema dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schema dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindings mfd: tps65219: Remove unused macros & add regmap.h mfd: tps65219: Use MFD_CELL macros leds: Add LED1202 I2C driver dt-bindings: leds: Add LED1202 LED Controller Documentation:leds: Add leds-st1202.rst mfd: Add support for AAEON UP board FPGA mfd: da9052: Store result from fault_log mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value mfd: cs42l43: Use devres for remove as well ...

mfd: cs42l43: Use devres for remove as well

2024-12-17T13:17:25+00:00

Currently the device is powered down in the remove callback, however all other clean up is done through devres. The problem here is the MFD children are cleaned up through devres. As this happens after the remove callback has run, this leads to the incorrect ordering where the child remove functions run after the device has been powered down. Put the power down into devres as well such that everything runs in the expected order. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20241205115822.2371719-4-ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones

mfd: cs42l43: Increase the SoundWire attach timeout

2024-12-17T13:17:25+00:00

Some SoundWire controllers take a very long time to fully power up. As such, increase the timeout that the cs42l43 driver will wait for the device to initially appear on the bus. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20241205115822.2371719-3-ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones

mfd: cs42l43: Use gpiod_set_raw for GPIO operations

2024-12-17T13:17:25+00:00

The GPIO framework supports specifying if a GPIO is active low or high and will invert accordingly. Whilst specifying this is part of the normal GPIO definition flow on device tree systems, it is a DSD extension under ACPI, that Windows doesn't really use. This means most ACPI systems do not set the polarity of the pin. The current cs42l43 driver assumes it is setting the level of the line directly, which is actually the case on all current systems and likely most future ones. However if the part was used in a device tree system or an ACPI system that actually used the DSD extensions this would get inverted, causing the driver to fail probe. As the driver always knows the polarity of its own reset line, use the raw set API making the intention to set the level directly clear and to avoid any such future issues. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20241205115822.2371719-2-ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones

mfd: cs42l43: Prepare support for updated bios patch

2024-12-17T13:17:25+00:00

Newer bios patch firmware versions now require use of the shadow register interface, which was previously only required by the full firmware, update the check accordingly. Signed-off-by: Maciej Strozek Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20241205115822.2371719-1-ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones

module: Convert symbol namespace to string literal

2024-12-02T19:34:44+00:00

Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS$([^)]*)$/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)$([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)$/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)$([^,]+), ([^)]+)$/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada Signed-off-by: Peter Zijlstra (Intel) Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH Signed-off-by: Linus Torvalds