kernel/linux.git/drivers/mfd/Kconfig, branch v4.14.263

mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants

2017-09-05T07:46:02+00:00

Both Bay and Cherry Trail devices may be used together with a Crystal Cove PMIC. Each platform has its own variant of the PMIC, which both use the same ACPI HID, but they are not 100% compatible. This commits makes the intel_soc_pmic_core code check the _HRV of the ACPI-firmware-node and selects intel_soc_pmic_config_byt_crc resp. intel_soc_pmic_config_cht_crc based on this. This fixes the Bay Trail specific ACPI OpRegion code causing problems on Cherry Trail devices. Specifically this was causing the external microsd slot on a Dell Venue 8 5855 (Cherry Trail version) to not work and the eMMC to become unreliable and throw lots of errors. Fixes: 5165238460 ("mfd: intel_soc_pmic: Core driver") Reported-and-tested-by: russianneuromancer Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Lee Jones

mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool

2017-09-05T07:46:01+00:00

The PMIC provides ACPI OpRegions which must be available for other drivers' PS0 / PS3 methods early-on as such it must be builtin as the Kconfig help text already states. Somehow its Kconfig option ended up being a tristate though, this fixes this. Signed-off-by: Hans de Goede Signed-off-by: Lee Jones

mfd: Add support for TPS68470 device

2017-09-05T07:46:01+00:00

The TPS68470 device is an advanced power management unit that powers a Compact Camera Module (CCM), generates clocks for image sensors, drives a dual LED for Flash and incorporates two LED drivers for general purpose indicators. This patch adds support for TPS68470 mfd device. Signed-off-by: Rajmohan Mani Signed-off-by: Lee Jones

mfd: Add ROHM BD9571MWV-M MFD PMIC driver

2017-09-05T07:46:00+00:00

Add the MFD part of the ROHM BD9571MWV-M PMIC driver and MAINTAINERS entry. The MFD part only specifies the regmap bits for the PMIC and binds the subdevs together. Signed-off-by: Marek Vasut Signed-off-by: Lee Jones

mfd: Kconfig: Add missing Kconfig dependency for TPS65086

2017-09-05T07:46:00+00:00

MTF_CORE should be enabled when driver is enabled. Without this patch you can configure: CONFIG_MFD_CORE is not set CONFIG_MFD_TPS65086=y ... which ends up with compilation error: drivers/mfd/tps65086.o: In function `tps65086_probe': drivers/mfd/tps65086.c:110: undefined reference to `mfd_add_devices' drivers/mfd/tps65086.c:110:(.text+0x128): relocation truncated to fit: \ R_AARCH64_CALL26 against undefined symbol `mfd_add_devices' Signed-off-by: Michal Simek Signed-off-by: Lee Jones

Merge branches 'ib-mfd-arm-i2c-4.14', 'ib-mfd-arm-usb-video-4.14', 'ib-mfd-hwmon-4.14', 'ib-mfd-iio-pwm-4.14', 'ib-mfd-input-rtc-4.14', 'ib-mfd-many-4.14' and 'ib-mfd-pinctrl-regulator-4.14' into ibs-for-mfd-merged

2017-09-05T07:45:36+00:00

mfd: Add STM32 LPTimer driver

2017-09-04T13:49:04+00:00

STM32 Low-Power Timer hardware block can be used for: - PWM generation - IIO trigger (in sync with PWM) - IIO quadrature encoder counter PWM and IIO timer configuration are mixed in the same registers so we need a multi fonction driver to be able to share those registers. Signed-off-by: Fabrice Gasnier Signed-off-by: Lee Jones

mfd: rk808: Add RK805 support

2017-08-21T07:54:20+00:00

The RK805 chip is a Power Management IC (PMIC) for multimedia and handheld devices. It contains the following components: - Regulators - RTC - Clocking Both RK808 and RK805 chips are using a similar register map, so we can reuse the RTC and Clocking functionality. Signed-off-by: Elaine Zhang Signed-off-by: Joseph Chen Signed-off-by: Heiko Stuebner Signed-off-by: Lee Jones

mfd: Add LP87565 PMIC support

2017-07-06T07:29:13+00:00

The LP87565 chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Configurable Bucks(Single and multi-phase). - Configurable General Purpose Output Signals (GPO). The LP87565-Q1 variant device uses two 2-phase outputs configuration, Buck0 is master for Buck0/1 output and Buck2 is master for Buck2/3 output. Signed-off-by: Keerthy Acked-by: Rob Herring Signed-off-by: Lee Jones

mfd: axp20x-i2c: Document that this must be builtin on x86

2017-07-06T07:29:13+00:00

On x86 the AXP288 PMIC provides an ACPI OpRegion handler, which must be available before other drivers using it are loaded, which can only be ensured if the MFD, OpRegion and i2c-bus drivers are built-in. Since the AXP20x MFD code is used on non x86 too we cannot simply change this into a bool, I've tried some Kconfig magic with if x86 but I could not get this working correctly, so this commit just documents that this should be built-in on x86, which fixes errors like these during boot: mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA ACPI Error: No handler for Region [REGS] (ffff93543b0cc3a8) [UserDefinedRegion] ACPI Error: Region UserDefinedRegion (ID=143) has no handler (20170119/exfldio-2 ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C7.PMI5.GET] (Node ffff93 ACPI Error: Method parse/execution failed [\_SB.PCI0.SHC1._PS0] (Node ffff93543b acpi 80860F14:02: Failed to change power state to D0 Signed-off-by: Hans de Goede Acked-by: Chen-Yu Tsai Tested-by: russianneuromancer Signed-off-by: Lee Jones