kernel/linux.git/drivers/memstick/host, branch v4.14.263

memstick: jmb38x_ms: use appropriate free function in jmb38x_ms_alloc_host()

2021-11-26T10:40:30+00:00

[ Upstream commit beae4a6258e64af609ad5995cc6b6056eb0d898e ] The "msh" pointer is device managed, meaning that memstick_alloc_host() calls device_initialize() on it. That means that it can't be free using kfree() but must instead be freed with memstick_free_host(). Otherwise it leads to a tiny memory leak of device resources. Fixes: 60fdd931d577 ("memstick: add support for JMicron jmb38x MemoryStick host controller") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20211011123912.GD15188@kili Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

memstick: r592: Fix a UAF bug when removing the driver

2021-11-26T10:40:28+00:00

[ Upstream commit 738216c1953e802aa9f930c5d15b8f9092c847ff ] In r592_remove(), the driver will free dma after freeing the host, which may cause a UAF bug. The following log reveals it: [ 45.361796 ] BUG: KASAN: use-after-free in r592_remove+0x269/0x350 [r592] [ 45.364286 ] Call Trace: [ 45.364472 ] dump_stack_lvl+0xa8/0xd1 [ 45.364751 ] print_address_description+0x87/0x3b0 [ 45.365137 ] kasan_report+0x172/0x1c0 [ 45.365415 ] ? r592_remove+0x269/0x350 [r592] [ 45.365834 ] ? r592_remove+0x269/0x350 [r592] [ 45.366168 ] __asan_report_load8_noabort+0x14/0x20 [ 45.366531 ] r592_remove+0x269/0x350 [r592] [ 45.378785 ] [ 45.378903 ] Allocated by task 4674: [ 45.379162 ] ____kasan_kmalloc+0xb5/0xe0 [ 45.379455 ] __kasan_kmalloc+0x9/0x10 [ 45.379730 ] __kmalloc+0x150/0x280 [ 45.379984 ] memstick_alloc_host+0x2a/0x190 [ 45.380664 ] [ 45.380781 ] Freed by task 5509: [ 45.381014 ] kasan_set_track+0x3d/0x70 [ 45.381293 ] kasan_set_free_info+0x23/0x40 [ 45.381635 ] ____kasan_slab_free+0x10b/0x140 [ 45.381950 ] __kasan_slab_free+0x11/0x20 [ 45.382241 ] slab_free_freelist_hook+0x81/0x150 [ 45.382575 ] kfree+0x13e/0x290 [ 45.382805 ] memstick_free+0x1c/0x20 [ 45.383070 ] device_release+0x9c/0x1d0 [ 45.383349 ] kobject_put+0x2ef/0x4c0 [ 45.383616 ] put_device+0x1f/0x30 [ 45.383865 ] memstick_free_host+0x24/0x30 [ 45.384162 ] r592_remove+0x242/0x350 [r592] [ 45.384473 ] pci_device_remove+0xa9/0x250 Signed-off-by: Zheyu Ma Link: https://lore.kernel.org/r/1634383581-11055-1-git-send-email-zheyuma97@gmail.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

memstick: r592: Fix error return in r592_probe()

2020-12-29T12:46:58+00:00

[ Upstream commit db29d3d1c2451e673e29c7257471e3ce9d50383a ] Fix to return a error code from the error handling case instead of 0. Fixes: 926341250102 ("memstick: add driver for Ricoh R5C592 card reader") Signed-off-by: Jing Xiangfeng Link: https://lore.kernel.org/r/20201125014718.153563-1-jingxiangfeng@huawei.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

memstick: jmb38x_ms: Fix an error handling path in 'jmb38x_ms_probe()'

2019-10-29T08:17:43+00:00

commit 28c9fac09ab0147158db0baeec630407a5e9b892 upstream. If 'jmb38x_ms_count_slots()' returns 0, we must undo the previous 'pci_request_regions()' call. Goto 'err_out_int' to fix it. Fixes: 60fdd931d577 ("memstick: add support for JMicron jmb38x MemoryStick host controller") Cc: stable@vger.kernel.org Signed-off-by: Christophe JAILLET Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

memstick: rtsx_usb_ms: Manage runtime PM when accessing the device

2016-10-17T13:43:05+00:00

Accesses to the rtsx usb device, which is the parent of the rtsx memstick device, must not be done unless it's runtime resumed. This is currently not the case and it could trigger various errors. Fix this by properly deal with runtime PM in this regards. This means making sure the device is runtime resumed, when serving requests via the ->request() callback or changing settings via the ->set_param() callbacks. Cc: Cc: Ritesh Raj Sarraf Cc: Alan Stern Signed-off-by: Ulf Hansson

memstick: rtsx_usb_ms: Runtime resume the device when polling for cards

2016-10-17T13:43:04+00:00

Accesses to the rtsx usb device, which is the parent of the rtsx memstick device, must not be done unless it's runtime resumed. Therefore when the rtsx_usb_ms driver polls for inserted memstick cards, let's add pm_runtime_get|put*() to make sure accesses is done when the rtsx usb device is runtime resumed. Reported-by: Ritesh Raj Sarraf Tested-by: Ritesh Raj Sarraf Signed-off-by: Alan Stern Cc: Signed-off-by: Ulf Hansson

rtsx_usb_ms: use schedule_timeout_idle() in polling loop

2016-05-24T00:04:14+00:00

First version of this patch has already been posted to LKML by Ben Hutchings ~6 months ago, but no further action were performed. Ben's original message: : rtsx_usb_ms creates a task that mostly sleeps, but tasks in : uninterruptible sleep still contribute to the load average (for : bug-compatibility with Unix). A load average of ~1 on a system that : should be idle is somewhat alarming. : : Change the sleep to be interruptible, but still ignore signals. References: https://bugs.debian.org/765717 Link: http://lkml.kernel.org/r/b49f95ae83057efa5d96f532803cba47@natalenko.name Signed-off-by: Oleksandr Natalenko Cc: Oleg Nesterov Cc: Ben Hutchings Cc: Lee Jones Cc: Wolfram Sang Cc: Roger Tseng Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

drivers/memstick/host/r592.c: avoid gcc-6 warning

2016-03-25T23:37:42+00:00

The r592 driver relies on behavior of the DMA mapping API that is normally observed but not guaranteed by the API. Instead it uses a runtime check to fail transfers if the API ever behaves When CONFIG_NEED_SG_DMA_LENGTH is not set, one of the checks turns into a comparison of a variable with itself, which gcc-6.0 now warns about: drivers/memstick/host/r592.c: In function 'r592_transfer_fifo_dma': drivers/memstick/host/r592.c:302:31: error: self-comparison always evaluates to false [-Werror=tautological-compare] (sg_dma_len(&dev->req->sg) < dev->req->sg.length)) { ^ The check itself is not a problem, so this patch just rephrases the condition in a way that gcc does not consider an indication of a mistake. We already know that dev->req->sg.length was initially R592_LFIFO_SIZE, so we can compare it to that constant again. Signed-off-by: Arnd Bergmann Cc: Maxim Levitsky Cc: Quentin Lambert Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

memstick: remove deprecated use of pci api

2015-07-01T02:44:57+00:00

Replace occurences of the pci api by appropriate call to the dma api. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr) @deprecated@ idexpression id; position p; @@ ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @bad1@ idexpression id; position deprecated.p; @@ ...when != &id->dev when != pci_get_drvdata ( id ) when != pci_enable_device ( id ) ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @depends on !bad1@ idexpression id; expression direction; position deprecated.p; @@ ( - pci_dma_supported@p ( id, + dma_supported ( &id->dev, ... + , GFP_ATOMIC ) | - pci_alloc_consistent@p ( id, + dma_alloc_coherent ( &id->dev, ... + , GFP_ATOMIC ) ) Signed-off-by: Quentin Lambert Cc: Maxim Levitsky Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds