kernel/linux.git/drivers/memory, branch linux-4.13.y

memory: atmel-ebi: Fix smc cycle xlate converter

2017-07-26T20:37:54+00:00

The converter function for translating ns timings in register values was initialized with a wrong function pointer. This resulted in wrong register values also for the setup and pulse registers when configuring the EBI interface trough dts. Includes a small fix in a comment of the smc driver, which was probably just a copy'n'paste mistake. Signed-off-by: Alexander Dahl Acked-by: Boris Brezillon Acked-by: Lee Jones Signed-off-by: Alexandre Belloni

memory: atmel-ebi: Allow t_DF timings of zero ns

2017-07-26T20:37:46+00:00

As reported in [1] and in [2] it's not possible to set the device tree property 'atmel,smc-tdf-ns' to zero, although the SoC allows a setting of 0ns for the t_DF time. Allow this setting by doing the same thing as in the atmel nand controller driver by setting ncycles to ATMEL_SMC_MODE_TDF_MIN if zero is set in the dts. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-March/490966.html [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-July/520652.html Suggested-by: Boris Brezillon Signed-off-by: Alexander Dahl Acked-by: Boris Brezillon Signed-off-by: Alexandre Belloni

memory: atmel-ebi: Fix smc timing return value evaluation

2017-07-26T20:37:30+00:00

Setting optional EBI/SMC properties through device tree always fails due to wrong evaluation of the return value of atmel_ebi_xslate_smc_timings(). If you put some of those properties in your dts file, but not 'atmel,smc-tdf-ns' the local variable 'required' in atmel_ebi_xslate_smc_timings() stays on 'false' after the first 'if' block. This leads to setting 'ret' to -EINVAL in the first run of the following 'for' loop which is then the return value of this function. However if you set 'atmel,smc-tdf-ns' in the dts file and everything in atmel_ebi_xslate_smc_timings() works well, it returns the content of 'required' which is 'true' then. So the function atmel_ebi_xslate_smc_timings() always returns non-zero which lets its call in atmel_ebi_xslate_smc_config() always fail and thus returning -EINVAL, so the EBI configuration for this node fails. Judging from the following code evaluating the local 'required' variable in atmel_ebi_xslate_smc_config() and the call of caps->xlate_config in atmel_ebi_dev_setup() it's probably right to only let the call fail if a negative error code is returned. Signed-off-by: Alexander Dahl Acked-by: Boris Brezillon Signed-off-by: Alexandre Belloni

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2017-07-04T21:47:47+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "New SoC specific drivers: - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later) based on the "BPMP" firmware - Clocksource and system controller drivers for the newly added Action Semi platforms (both arm and arm64). Reset subsystem, merged through arm-soc by tradition: - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs - Various subsystem-wide cleanups Updates for existing SoC-specific drivers - TI GPMC (General Purpose Memory Controller) - Mediatek "scpsys" system controller support for MT6797 - Broadcom "brcmstb_gisb" bus arbitrer - ARM SCPI firmware - Renesas "SYSC" system controller One more driver update was submitted for the Freescale/NXP DPAA data path acceleration that has previously been used on PowerPC chips. I ended up postponing the merge until some API questions for its unusual MMIO access are resolved" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) clocksource: owl: Add S900 support clocksource: Add Owl timer soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON firmware: tegra: Fix locking bugs in BPMP soc/tegra: flowctrl: Fix error handling soc/tegra: bpmp: Implement generic PM domains soc/tegra: bpmp: Update ABI header PM / Domains: Allow overriding the ->xlate() callback soc: brcmstb: enable drivers for ARM64 and BMIPS soc: renesas: Rework Kconfig and Makefile logic reset: Add the TI SCI reset driver dt-bindings: reset: Add TI SCI reset binding reset: use kref for reference counting soc: qcom: smsm: Improve error handling, quiesce probe deferral cpufreq: scpi: use new scpi_ops functions to remove duplicate code firmware: arm_scpi: add support to populate OPPs and get transition latency dt-bindings: reset: Add reset manager offsets for Stratix10 memory: omap-gpmc: add error message if bank-width property is absent memory: omap-gpmc: make dts snippet include semicolon reset: Add a Gemini reset controller ...

Merge tag 'omap-for-v4.13/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

2017-06-19T01:55:59+00:00

Few improvments for GPMC (General Purpose Memory Controller) found on TI SoCs to produce an error for missing bank-width and to make the bootloader timing debug output usable for device tree timings. * tag 'omap-for-v4.13/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: memory: omap-gpmc: add error message if bank-width property is absent memory: omap-gpmc: make dts snippet include semicolon Signed-off-by: Olof Johansson

Merge 4.12-rc5 into char-misc-next

2017-06-12T06:18:10+00:00

We want the char/misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman

memory: ti-aemif: Handle return value of clk_prepare_enable

2017-06-03T10:08:14+00:00

clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav Signed-off-by: Greg Kroah-Hartman

Merge tag 'at91-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes

2017-06-02T00:07:31+00:00

Fixes for 4.12: Fix two compilation issues * tag 'at91-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91: select CONFIG_ARM_CPU_SUSPEND memory: atmel-ebi: mark PM ops as __maybe_unused Signed-off-by: Olof Johansson

memory: omap-gpmc: add error message if bank-width property is absent

2017-05-31T17:08:10+00:00

Instead of failing silently log a hint for the dt author about the reason of the failure. Signed-off-by: Uwe Kleine-König Acked-by: Roger Quadros Signed-off-by: Tony Lindgren

memory: omap-gpmc: make dts snippet include semicolon

2017-05-31T17:07:08+00:00

In the device tree each property must be terminated with a semicolon, so include them in the output for easier cut-n-paste. Signed-off-by: Uwe Kleine-König Acked-by: Roger Quadros Signed-off-by: Tony Lindgren