kernel/linux.git/drivers/memory/tegra/tegra194.c, branch linux-7.1.y

memory: tegra: Prepare for supporting multiple intmask registers

2026-03-07T17:02:41+00:00

Add a new structure for the intmask register e.g. MC_INTMASK_0 and it's mask value. Add an array of these new structures to prepare for supporting multiple intmask registers. This is done in preparation for adding support for Tegra264 which supports multiple intmask registers. Signed-off-by: Ketan Patil Reviewed-by: Jon Hunter Tested-by: Jon Hunter Link: https://patch.msgid.link/20260226163115.1152181-6-ketanp@nvidia.com [krzk: Fix checkpatch warning] Signed-off-by: Krzysztof Kozlowski

memory: tegra: Group SoC specific fields

2026-03-07T17:02:29+00:00

Introduce new SoC specific fields in tegra_mc_soc struct for high address mask and error status type mask because Tegra264 has different values for these than the existing devices. Error status registers e.g. MC_ERR_STATUS_0 has few bits which indicate the type of the error. In order to obtain such type of error from error status register, we use error status type mask. Similarly, these error status registers have bits which indicate the higher address bits of the address responsible for mc error. In order to obtain such higher address, we use high address mask. Make this change to prepare for adding MC interrupt support for Tegra264. Signed-off-by: Ketan Patil Reviewed-by: Jon Hunter Tested-by: Jon Hunter Link: https://patch.msgid.link/20260226163115.1152181-5-ketanp@nvidia.com [krzk: Fix checkpatch warning] Signed-off-by: Krzysztof Kozlowski

memory: tegra: Add support for multiple IRQs

2026-03-07T16:59:37+00:00

Add support to handle multiple MC interrupts lines, as supported by Tegra264. Turn the single IRQ handler callback into a counted array to allow specifying a separate handler for each interrupt. Move IRQ handlers into tegra_mc_soc struct, so as to specify SoC specific values. Signed-off-by: Ketan Patil Reviewed-by: Jon Hunter Tested-by: Jon Hunter Link: https://patch.msgid.link/20260226163115.1152181-4-ketanp@nvidia.com Signed-off-by: Krzysztof Kozlowski

memory: tegra: Group error handling related registers

2026-03-07T16:59:35+00:00

Group MC error related registers into a struct as they could have SoC specific values. Tegra264 has different register offsets than the existing devices and so in order to add support for Tegra264 we need to first make this change. Signed-off-by: Ketan Patil Reviewed-by: Jon Hunter Tested-by: Jon Hunter Link: https://patch.msgid.link/20260226163115.1152181-2-ketanp@nvidia.com Signed-off-by: Krzysztof Kozlowski

memory: tegra: Add dummy implementation on Tegra194

2023-07-10T10:04:56+00:00

With the introduction of commit 9365bf006f53 ("PCI: tegra194: Add interconnect support in Tegra234"), the PCI driver on Tegra194 and later requires an interconnect provider. However, a provider is currently only exposed on Tegra234 and this causes PCI on Tegra194 to defer probe indefinitely. Fix this by adding a dummy implementation on Tegra194. This allows nodes to be provided to interconnect consumers, but doesn't do any bandwidth accounting or frequency scaling. Fixes: 9365bf006f53 ("PCI: tegra194: Add interconnect support in Tegra234") Reported-by: Jon Hunter Signed-off-by: Thierry Reding Reviewed-by: Sumit Gupta Tested-by: Sumit Gupta Link: https://lore.kernel.org/r/20230629160132.768940-1-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski

memory: tegra: Add MC error logging on Tegra186 onward

2022-05-09T08:46:14+00:00

Add support for logging memory controller errors on Tegra186, Tegra194 and Tegra234. On these SoCs, interrupts can occur on multiple channels. Add support required to read the status of interrupts across multiple channels, log and clear them. Also add new interrupts supported on these SoCs. Reviewed-by: Dmitry Osipenko Signed-off-by: Ashish Mhetre Signed-off-by: Thierry Reding Link: https://lore.kernel.org/r/20220506132312.3910637-5-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski

memory: tegra: Add memory controller channels support

2022-05-09T08:46:11+00:00

From Tegra186 onwards, the memory controller supports multiple channels. Add support for mapping the address spaces of these channels and specify the number of channels supported by Tegra186, Tegra194 and Tegra234. In case of old bindings, channels won't be present. If channels are not present then print a warning and continue so that backward compatibility will be preserved in driver. During error interrupts from memory controller, appropriate registers from these channels need to be accessed for logging error info. Signed-off-by: Ashish Mhetre Reviewed-by: Dmitry Osipenko Signed-off-by: Thierry Reding Link: https://lore.kernel.org/r/20220506132312.3910637-4-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski

memory: tegra: Split Tegra194 data into separate file

2021-06-03T19:49:41+00:00

Keep the directory structure consistent by splitting the Tegra194 data into a separate file. Signed-off-by: Thierry Reding Link: https://lore.kernel.org/r/20210602163302.120041-13-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski