kernel/linux.git/drivers/media/v4l2-core, branch linux-4.16.y

media: v4l2-compat-ioctl32: don't oops on overlay

2018-04-19T06:54:05+00:00

commit 85ea29f19eab56ec16ec6b92bc67305998706afa upstream. At put_v4l2_window32(), it tries to access kp->clips. However, kp points to an userspace pointer. So, it should be obtained via get_user(), otherwise it can OOPS: vivid-000: ================== END STATUS ================== BUG: unable to handle kernel paging request at 00000000fffb18e0 IP: [] __put_v4l2_format32+0x169/0x220 [videodev] PGD 3f5776067 PUD 3f576f067 PMD 3f5769067 PTE 800000042548f067 Oops: 0001 [#1] SMP Modules linked in: vivid videobuf2_vmalloc videobuf2_memops v4l2_dv_timings videobuf2_core v4l2_common videodev media xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill binfmt_misc snd_hda_codec_hdmi i915 snd_hda_intel snd_hda_controller snd_hda_codec intel_rapl x86_pkg_temp_thermal snd_hwdep intel_powerclamp snd_pcm coretemp snd_seq_midi kvm_intel kvm snd_seq_midi_event snd_rawmidi i2c_algo_bit drm_kms_helper snd_seq drm crct10dif_pclmul e1000e snd_seq_device crc32_pclmul snd_timer ghash_clmulni_intel snd mei_me mei ptp pps_core soundcore lpc_ich video crc32c_intel [last unloaded: media] CPU: 2 PID: 28332 Comm: v4l2-compliance Not tainted 3.18.102+ #107 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 task: ffff8804293f8000 ti: ffff8803f5640000 task.ti: ffff8803f5640000 RIP: 0010:[] [] __put_v4l2_format32+0x169/0x220 [videodev] RSP: 0018:ffff8803f5643e28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffb1ab4 RDX: 00000000fffb1a68 RSI: 00000000fffb18d8 RDI: 00000000fffb1aa8 RBP: ffff8803f5643e48 R08: 0000000000000001 R09: ffff8803f54b0378 R10: 0000000000000000 R11: 0000000000000168 R12: 00000000fffb18c0 R13: 00000000fffb1a94 R14: 00000000fffb18c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880456d00000(0063) knlGS:00000000f7100980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000fffb18e0 CR3: 00000003f552b000 CR4: 00000000003407e0 Stack: 00000000fffb1a94 00000000c0cc5640 0000000000000056 ffff8804274f3600 ffff8803f5643ed0 ffffffffc0547e16 0000000000000003 ffff8803f5643eb0 ffffffff81301460 ffff88009db44b01 ffff880441942520 ffff8800c0d05640 Call Trace: [] v4l2_compat_ioctl32+0x12d6/0x1b1d [videodev] [] ? file_has_perm+0x70/0xc0 [] compat_SyS_ioctl+0xec/0x1200 [] sysenter_dispatch+0x7/0x21 Code: 00 00 48 8b 80 48 c0 ff ff 48 83 e8 38 49 39 c6 0f 87 2b ff ff ff 49 8d 45 1c e8 a3 ce e3 c0 85 c0 0f 85 1a ff ff ff 41 8d 40 ff <4d> 8b 64 24 20 41 89 d5 48 8d 44 40 03 4d 8d 34 c4 eb 15 0f 1f RIP [] __put_v4l2_format32+0x169/0x220 [videodev] RSP CR2: 00000000fffb18e0 Tested with vivid driver on Kernel v3.18.102. Same bug happens upstream too: BUG: KASAN: user-memory-access in __put_v4l2_format32+0x98/0x4d0 [videodev] Read of size 8 at addr 00000000ffe48400 by task v4l2-compliance/8713 CPU: 0 PID: 8713 Comm: v4l2-compliance Not tainted 4.16.0-rc4+ #108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 Call Trace: dump_stack+0x5c/0x7c kasan_report+0x164/0x380 ? __put_v4l2_format32+0x98/0x4d0 [videodev] __put_v4l2_format32+0x98/0x4d0 [videodev] v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a ================================================================== Disabling lock debugging due to kernel taint BUG: unable to handle kernel paging request at 00000000ffe48400 IP: __put_v4l2_format32+0x98/0x4d0 [videodev] PGD 3a22fb067 P4D 3a22fb067 PUD 39b6f0067 PMD 39b6f1067 PTE 80000003256af067 Oops: 0001 [#1] SMP KASAN Modules linked in: vivid videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops v4l2_tpg v4l2_dv_timings videobuf2_v4l2 videobuf2_common v4l2_common videodev xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp i915 coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hwdep snd_hda_core kvm snd_pcm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel snd_seq_midi_event i2c_algo_bit intel_cstate snd_rawmidi intel_uncore snd_seq drm_kms_helper e1000e snd_seq_device snd_timer intel_rapl_perf drm ptp snd mei_me mei lpc_ich pps_core soundcore video crc32c_intel CPU: 0 PID: 8713 Comm: v4l2-compliance Tainted: G B 4.16.0-rc4+ #108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 RIP: 0010:__put_v4l2_format32+0x98/0x4d0 [videodev] RSP: 0018:ffff8803b9be7d30 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8803ac983e80 RCX: ffffffff8cd929f2 RDX: 1ffffffff1d0a149 RSI: 0000000000000297 RDI: 0000000000000297 RBP: 00000000ffe485c0 R08: fffffbfff1cf5123 R09: ffffffff8e7a8948 R10: 0000000000000001 R11: fffffbfff1cf5122 R12: 00000000ffe483e0 R13: 00000000ffe485c4 R14: ffff8803ac985918 R15: 00000000ffe483e8 FS: 0000000000000000(0000) GS:ffff880407400000(0063) knlGS:00000000f7a46980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000ffe48400 CR3: 00000003a83f2003 CR4: 00000000003606f0 Call Trace: v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a Code: 4c 89 f7 4d 8d 7c 24 08 e8 e6 a4 69 cb 48 8b 83 98 1a 00 00 48 83 e8 10 49 39 c7 0f 87 9d 01 00 00 49 8d 7c 24 20 e8 c8 a4 69 cb <4d> 8b 74 24 20 4c 89 ef 4c 89 fe ba 10 00 00 00 e8 23 d9 08 cc RIP: __put_v4l2_format32+0x98/0x4d0 [videodev] RSP: ffff8803b9be7d30 CR2: 00000000ffe48400 cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab Reviewed-by: Sakari Ailus Reviewed-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: v4l2-core: fix size of devnode_nums[] bitarray

2018-04-19T06:54:05+00:00

commit a95845ba184b854106972f5d8f50354c2d272c06 upstream. The size of devnode_nums[] bit array is too short to store information for VFL_TYPE_TOUCH. That causes it to override other memory regions. Thankfully, on recent reports, it is overriding video_device[] array, trigging a WARN_ON(). Yet, it just warns about the problem, but let the code excecuting, with generates an OOPS: [ 43.177394] WARNING: CPU: 1 PID: 711 at drivers/media/v4l2-core/v4l2-dev.c:945 __video_register_device+0xc99/0x1090 [videodev] [ 43.177396] Modules linked in: hid_sensor_custom hid_sensor_als hid_sensor_incl_3d hid_sensor_rotation hid_sensor_magn_3d hid_sensor_accel_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf joydev hid_sensor_iio_common hid_rmi(+) rmi_core industrialio videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev hid_multitouch media hid_sensor_hub binfmt_misc nls_iso8859_1 snd_hda_codec_hdmi arc4 snd_soc_skl snd_soc_skl_ipc snd_hda_ext_core snd_soc_sst_dsp snd_soc_sst_ipc snd_hda_codec_realtek snd_soc_acpi snd_hda_codec_generic snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine snd_hda_intel snd_hda_codec intel_rapl snd_hda_core x86_pkg_temp_thermal snd_hwdep intel_powerclamp coretemp snd_pcm kvm_intel snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul [ 43.177426] crc32_pclmul ghash_clmulni_intel iwlmvm pcbc mac80211 snd_seq aesni_intel iwlwifi aes_x86_64 snd_seq_device crypto_simd glue_helper cryptd snd_timer intel_cstate intel_rapl_perf input_leds serio_raw intel_wmi_thunderbolt snd wmi_bmof cfg80211 soundcore ideapad_laptop sparse_keymap idma64 virt_dma tpm_crb acpi_pad int3400_thermal acpi_thermal_rel intel_pch_thermal processor_thermal_device mac_hid int340x_thermal_zone mei_me intel_soc_dts_iosf mei intel_lpss_pci shpchp intel_lpss sch_fq_codel vfio_pci nfsd vfio_virqfd parport_pc ppdev auth_rpcgss nfs_acl lockd grace lp parport sunrpc ip_tables x_tables autofs4 hid_logitech_hidpp hid_logitech_dj hid_generic usbhid kvmgt vfio_mdev mdev vfio_iommu_type1 vfio kvm irqbypass i915 i2c_algo_bit drm_kms_helper syscopyarea sdhci_pci sysfillrect [ 43.177466] sysimgblt cqhci fb_sys_fops sdhci drm i2c_hid wmi hid video pinctrl_sunrisepoint pinctrl_intel [ 43.177474] CPU: 1 PID: 711 Comm: systemd-udevd Not tainted 4.16.0 #1 [ 43.177475] Hardware name: LENOVO 80UE/VIUU4, BIOS 2UCN10T 10/14/2016 [ 43.177481] RIP: 0010:__video_register_device+0xc99/0x1090 [videodev] [ 43.177482] RSP: 0000:ffffa5c5c231b420 EFLAGS: 00010202 [ 43.177484] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000000 [ 43.177485] RDX: ffffffffc0c44cc0 RSI: ffffffffffffffff RDI: ffffffffc0c44cc0 [ 43.177486] RBP: ffffa5c5c231b478 R08: ffffffffc0c96900 R09: ffff8eda1a51f018 [ 43.177487] R10: 0000000000000600 R11: 00000000000003b6 R12: 0000000000000000 [ 43.177488] R13: 0000000000000005 R14: ffffffffc0c96900 R15: ffff8eda1d6d91c0 [ 43.177489] FS: 00007fd2d8ef2480(0000) GS:ffff8eda33480000(0000) knlGS:0000000000000000 [ 43.177490] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.177491] CR2: 00007ffe0a6ad01c CR3: 0000000456ae2004 CR4: 00000000003606e0 [ 43.177492] Call Trace: [ 43.177498] ? devres_add+0x5f/0x70 [ 43.177502] rmi_f54_probe+0x437/0x470 [rmi_core] [ 43.177505] rmi_function_probe+0x25/0x30 [rmi_core] [ 43.177507] driver_probe_device+0x310/0x480 [ 43.177509] __device_attach_driver+0x86/0x100 [ 43.177511] ? __driver_attach+0xf0/0xf0 [ 43.177512] bus_for_each_drv+0x6b/0xb0 [ 43.177514] __device_attach+0xdd/0x160 [ 43.177516] device_initial_probe+0x13/0x20 [ 43.177518] bus_probe_device+0x95/0xa0 [ 43.177519] device_add+0x44b/0x680 [ 43.177522] rmi_register_function+0x62/0xd0 [rmi_core] [ 43.177525] rmi_create_function+0x112/0x1a0 [rmi_core] [ 43.177527] ? rmi_driver_clear_irq_bits+0xc0/0xc0 [rmi_core] [ 43.177530] rmi_scan_pdt+0xca/0x1a0 [rmi_core] [ 43.177535] rmi_init_functions+0x5b/0x120 [rmi_core] [ 43.177537] rmi_driver_probe+0x152/0x3c0 [rmi_core] [ 43.177547] ? sysfs_create_link+0x25/0x40 [ 43.177549] driver_probe_device+0x310/0x480 [ 43.177551] __device_attach_driver+0x86/0x100 [ 43.177553] ? __driver_attach+0xf0/0xf0 [ 43.177554] bus_for_each_drv+0x6b/0xb0 [ 43.177556] __device_attach+0xdd/0x160 [ 43.177558] device_initial_probe+0x13/0x20 [ 43.177560] bus_probe_device+0x95/0xa0 [ 43.177561] device_add+0x44b/0x680 [ 43.177564] rmi_register_transport_device+0x84/0x100 [rmi_core] [ 43.177568] rmi_input_configured+0xbf/0x1a0 [hid_rmi] [ 43.177571] ? input_allocate_device+0xdf/0xf0 [ 43.177574] hidinput_connect+0x4a9/0x37a0 [hid] [ 43.177578] hid_connect+0x326/0x3d0 [hid] [ 43.177581] hid_hw_start+0x42/0x70 [hid] [ 43.177583] rmi_probe+0x115/0x510 [hid_rmi] [ 43.177586] hid_device_probe+0xd3/0x150 [hid] [ 43.177588] ? sysfs_create_link+0x25/0x40 [ 43.177590] driver_probe_device+0x310/0x480 [ 43.177592] __driver_attach+0xbf/0xf0 [ 43.177593] ? driver_probe_device+0x480/0x480 [ 43.177595] bus_for_each_dev+0x74/0xb0 [ 43.177597] ? kmem_cache_alloc_trace+0x1a6/0x1c0 [ 43.177599] driver_attach+0x1e/0x20 [ 43.177600] bus_add_driver+0x167/0x260 [ 43.177602] ? 0xffffffffc0cbc000 [ 43.177604] driver_register+0x60/0xe0 [ 43.177605] ? 0xffffffffc0cbc000 [ 43.177607] __hid_register_driver+0x63/0x70 [hid] [ 43.177610] rmi_driver_init+0x23/0x1000 [hid_rmi] [ 43.177612] do_one_initcall+0x52/0x191 [ 43.177615] ? _cond_resched+0x19/0x40 [ 43.177617] ? kmem_cache_alloc_trace+0xa2/0x1c0 [ 43.177619] ? do_init_module+0x27/0x209 [ 43.177621] do_init_module+0x5f/0x209 [ 43.177623] load_module+0x1987/0x1f10 [ 43.177626] ? ima_post_read_file+0x96/0xa0 [ 43.177629] SYSC_finit_module+0xfc/0x120 [ 43.177630] ? SYSC_finit_module+0xfc/0x120 [ 43.177632] SyS_finit_module+0xe/0x10 [ 43.177634] do_syscall_64+0x73/0x130 [ 43.177637] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 43.177638] RIP: 0033:0x7fd2d880b839 [ 43.177639] RSP: 002b:00007ffe0a6b2368 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 43.177641] RAX: ffffffffffffffda RBX: 000055cdd86542e0 RCX: 00007fd2d880b839 [ 43.177641] RDX: 0000000000000000 RSI: 00007fd2d84ea0e5 RDI: 0000000000000016 [ 43.177642] RBP: 00007fd2d84ea0e5 R08: 0000000000000000 R09: 00007ffe0a6b2480 [ 43.177643] R10: 0000000000000016 R11: 0000000000000246 R12: 0000000000000000 [ 43.177644] R13: 000055cdd8688930 R14: 0000000000020000 R15: 000055cdd86542e0 [ 43.177645] Code: 48 c7 c7 54 b4 c3 c0 e8 96 9d ec dd e9 d4 fb ff ff 0f 0b 41 be ea ff ff ff e9 c7 fb ff ff 0f 0b 41 be ea ff ff ff e9 ba fb ff ff <0f> 0b e9 d8 f4 ff ff 83 fa 01 0f 84 c4 02 00 00 48 83 78 68 00 [ 43.177675] ---[ end trace d44d9bc41477c2dd ]--- [ 43.177679] BUG: unable to handle kernel NULL pointer dereference at 0000000000000499 [ 43.177723] IP: __video_register_device+0x1cc/0x1090 [videodev] [ 43.177749] PGD 0 P4D 0 [ 43.177764] Oops: 0000 [#1] SMP PTI [ 43.177780] Modules linked in: hid_sensor_custom hid_sensor_als hid_sensor_incl_3d hid_sensor_rotation hid_sensor_magn_3d hid_sensor_accel_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf joydev hid_sensor_iio_common hid_rmi(+) rmi_core industrialio videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev hid_multitouch media hid_sensor_hub binfmt_misc nls_iso8859_1 snd_hda_codec_hdmi arc4 snd_soc_skl snd_soc_skl_ipc snd_hda_ext_core snd_soc_sst_dsp snd_soc_sst_ipc snd_hda_codec_realtek snd_soc_acpi snd_hda_codec_generic snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine snd_hda_intel snd_hda_codec intel_rapl snd_hda_core x86_pkg_temp_thermal snd_hwdep intel_powerclamp coretemp snd_pcm kvm_intel snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul [ 43.178055] crc32_pclmul ghash_clmulni_intel iwlmvm pcbc mac80211 snd_seq aesni_intel iwlwifi aes_x86_64 snd_seq_device crypto_simd glue_helper cryptd snd_timer intel_cstate intel_rapl_perf input_leds serio_raw intel_wmi_thunderbolt snd wmi_bmof cfg80211 soundcore ideapad_laptop sparse_keymap idma64 virt_dma tpm_crb acpi_pad int3400_thermal acpi_thermal_rel intel_pch_thermal processor_thermal_device mac_hid int340x_thermal_zone mei_me intel_soc_dts_iosf mei intel_lpss_pci shpchp intel_lpss sch_fq_codel vfio_pci nfsd vfio_virqfd parport_pc ppdev auth_rpcgss nfs_acl lockd grace lp parport sunrpc ip_tables x_tables autofs4 hid_logitech_hidpp hid_logitech_dj hid_generic usbhid kvmgt vfio_mdev mdev vfio_iommu_type1 vfio kvm irqbypass i915 i2c_algo_bit drm_kms_helper syscopyarea sdhci_pci sysfillrect [ 43.178337] sysimgblt cqhci fb_sys_fops sdhci drm i2c_hid wmi hid video pinctrl_sunrisepoint pinctrl_intel [ 43.178380] CPU: 1 PID: 711 Comm: systemd-udevd Tainted: G W 4.16.0 #1 [ 43.178411] Hardware name: LENOVO 80UE/VIUU4, BIOS 2UCN10T 10/14/2016 [ 43.178441] RIP: 0010:__video_register_device+0x1cc/0x1090 [videodev] [ 43.178467] RSP: 0000:ffffa5c5c231b420 EFLAGS: 00010202 [ 43.178490] RAX: ffffffffc0c44cc0 RBX: 0000000000000005 RCX: ffffffffc0c454c0 [ 43.178519] RDX: 0000000000000001 RSI: ffff8eda1d6d9118 RDI: ffffffffc0c44cc0 [ 43.178549] RBP: ffffa5c5c231b478 R08: ffffffffc0c96900 R09: ffff8eda1a51f018 [ 43.178579] R10: 0000000000000600 R11: 00000000000003b6 R12: 0000000000000000 [ 43.178608] R13: 0000000000000005 R14: ffffffffc0c96900 R15: ffff8eda1d6d91c0 [ 43.178636] FS: 00007fd2d8ef2480(0000) GS:ffff8eda33480000(0000) knlGS:0000000000000000 [ 43.178669] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.178693] CR2: 0000000000000499 CR3: 0000000456ae2004 CR4: 00000000003606e0 [ 43.178721] Call Trace: [ 43.178736] ? devres_add+0x5f/0x70 [ 43.178755] rmi_f54_probe+0x437/0x470 [rmi_core] [ 43.178779] rmi_function_probe+0x25/0x30 [rmi_core] [ 43.178805] driver_probe_device+0x310/0x480 [ 43.178828] __device_attach_driver+0x86/0x100 [ 43.178851] ? __driver_attach+0xf0/0xf0 [ 43.178884] bus_for_each_drv+0x6b/0xb0 [ 43.178904] __device_attach+0xdd/0x160 [ 43.178925] device_initial_probe+0x13/0x20 [ 43.178948] bus_probe_device+0x95/0xa0 [ 43.178968] device_add+0x44b/0x680 [ 43.178987] rmi_register_function+0x62/0xd0 [rmi_core] [ 43.181747] rmi_create_function+0x112/0x1a0 [rmi_core] [ 43.184677] ? rmi_driver_clear_irq_bits+0xc0/0xc0 [rmi_core] [ 43.187505] rmi_scan_pdt+0xca/0x1a0 [rmi_core] [ 43.190171] rmi_init_functions+0x5b/0x120 [rmi_core] [ 43.192809] rmi_driver_probe+0x152/0x3c0 [rmi_core] [ 43.195403] ? sysfs_create_link+0x25/0x40 [ 43.198253] driver_probe_device+0x310/0x480 [ 43.201083] __device_attach_driver+0x86/0x100 [ 43.203800] ? __driver_attach+0xf0/0xf0 [ 43.206503] bus_for_each_drv+0x6b/0xb0 [ 43.209291] __device_attach+0xdd/0x160 [ 43.212207] device_initial_probe+0x13/0x20 [ 43.215146] bus_probe_device+0x95/0xa0 [ 43.217885] device_add+0x44b/0x680 [ 43.220597] rmi_register_transport_device+0x84/0x100 [rmi_core] [ 43.223321] rmi_input_configured+0xbf/0x1a0 [hid_rmi] [ 43.226051] ? input_allocate_device+0xdf/0xf0 [ 43.228814] hidinput_connect+0x4a9/0x37a0 [hid] [ 43.231701] hid_connect+0x326/0x3d0 [hid] [ 43.234548] hid_hw_start+0x42/0x70 [hid] [ 43.237302] rmi_probe+0x115/0x510 [hid_rmi] [ 43.239862] hid_device_probe+0xd3/0x150 [hid] [ 43.242558] ? sysfs_create_link+0x25/0x40 [ 43.242828] audit: type=1400 audit(1522795151.600:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine" pid=1151 comm="apparmor_parser" [ 43.244859] driver_probe_device+0x310/0x480 [ 43.244862] __driver_attach+0xbf/0xf0 [ 43.246982] audit: type=1400 audit(1522795151.600:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1151 comm="apparmor_parser" [ 43.249403] ? driver_probe_device+0x480/0x480 [ 43.249405] bus_for_each_dev+0x74/0xb0 [ 43.253200] audit: type=1400 audit(1522795151.600:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//snap_update_ns" pid=1151 comm="apparmor_parser" [ 43.254055] ? kmem_cache_alloc_trace+0x1a6/0x1c0 [ 43.256282] audit: type=1400 audit(1522795151.604:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1152 comm="apparmor_parser" [ 43.258436] driver_attach+0x1e/0x20 [ 43.260875] audit: type=1400 audit(1522795151.604:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1152 comm="apparmor_parser" [ 43.263118] bus_add_driver+0x167/0x260 [ 43.267676] audit: type=1400 audit(1522795151.604:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1152 comm="apparmor_parser" [ 43.268807] ? 0xffffffffc0cbc000 [ 43.268812] driver_register+0x60/0xe0 [ 43.271184] audit: type=1400 audit(1522795151.604:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1152 comm="apparmor_parser" [ 43.274081] ? 0xffffffffc0cbc000 [ 43.274086] __hid_register_driver+0x63/0x70 [hid] [ 43.288367] rmi_driver_init+0x23/0x1000 [hid_rmi] [ 43.291501] do_one_initcall+0x52/0x191 [ 43.292348] audit: type=1400 audit(1522795151.652:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1242 comm="apparmor_parser" [ 43.294212] ? _cond_resched+0x19/0x40 [ 43.300028] ? kmem_cache_alloc_trace+0xa2/0x1c0 [ 43.303475] ? do_init_module+0x27/0x209 [ 43.306842] do_init_module+0x5f/0x209 [ 43.310269] load_module+0x1987/0x1f10 [ 43.313704] ? ima_post_read_file+0x96/0xa0 [ 43.317174] SYSC_finit_module+0xfc/0x120 [ 43.320754] ? SYSC_finit_module+0xfc/0x120 [ 43.324065] SyS_finit_module+0xe/0x10 [ 43.327387] do_syscall_64+0x73/0x130 [ 43.330909] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 43.334305] RIP: 0033:0x7fd2d880b839 [ 43.337810] RSP: 002b:00007ffe0a6b2368 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 43.341259] RAX: ffffffffffffffda RBX: 000055cdd86542e0 RCX: 00007fd2d880b839 [ 43.344613] RDX: 0000000000000000 RSI: 00007fd2d84ea0e5 RDI: 0000000000000016 [ 43.347962] RBP: 00007fd2d84ea0e5 R08: 0000000000000000 R09: 00007ffe0a6b2480 [ 43.351456] R10: 0000000000000016 R11: 0000000000000246 R12: 0000000000000000 [ 43.354845] R13: 000055cdd8688930 R14: 0000000000020000 R15: 000055cdd86542e0 [ 43.358224] Code: c7 05 ad 12 02 00 00 00 00 00 48 8d 88 00 08 00 00 eb 09 48 83 c0 08 48 39 c1 74 31 48 8b 10 48 85 d2 74 ef 49 8b b7 98 04 00 00 <48> 39 b2 98 04 00 00 75 df 48 63 92 f8 04 00 00 f0 48 0f ab 15 [ 43.361764] RIP: __video_register_device+0x1cc/0x1090 [videodev] RSP: ffffa5c5c231b420 [ 43.365281] CR2: 0000000000000499 This patch fixes the array size and changes the WARN_ON() to return an error, instead of letting the Kernel to proceed with registering. Cc: stable@vger.kernel.org # For Kernel 4.16 Fixes: 4839c58f034a ("media: v4l2-dev: convert VFL_TYPE_* into an enum") Reported-by: Peter Geis Reported-by: Jaak Ristioja Reported-by: Michał Siemek Reviewed-by: Hans Verkuil Reviewed-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: videobuf2: fix build issues with vb2-trace

2018-02-23T10:13:53+00:00

There was a trouble with vb2-trace: instead of being part of VB2 core, it was stored at V4L2 videodev. That was wrong, as it doesn't actually belong to V4L2 core. Now that vb2 is not part of v4l2-core, its trace functions should be moved altogether. So, move it to its rightful place: at videobuf2-core. That fixes those errors: drivers/media/common/videobuf2/videobuf2-core.o: In function `__read_once_size': ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_queue' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_queue' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_done' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_done' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_qbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_qbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_dqbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_dqbuf' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x10): undefined reference to `__tracepoint_vb2_buf_queue' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x28): undefined reference to `__tracepoint_vb2_buf_done' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x40): undefined reference to `__tracepoint_vb2_qbuf' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x58): undefined reference to `__tracepoint_vb2_dqbuf' Reported-by: kbuild test robot Signed-off-by: Mauro Carvalho Chehab

media: videobuf2: Add VIDEOBUF2_V4L2 Kconfig option for VB2 V4L2 part

2018-02-23T10:12:55+00:00

Videobuf2 is now separate from V4L2 and can be now built without it, at least in principle --- enabling videobuf2 in kernel configuration attempts to compile videobuf2-v4l2.c but that will fail if CONFIG_VIDEO_V4L2 isn't enabled. Solve this by adding a separate Kconfig option for videobuf2-v4l2 and make it a separate module as well. This means that drivers now need to choose both the appropriate videobuf2 memory type (VIDEOBUF2_{VMALLOC,DMA_CONTIG,DMA_SG}) and VIDEOBUF2_V4L2 if they need both. Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03+00:00

This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^$[^\"]*$$\$/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro Signed-off-by: Linus Torvalds

Merge tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2018-02-06T19:27:48+00:00

Pull media updates from Mauro Carvalho Chehab: - videobuf2 was moved to a media/common dir, as it is now used by the DVB subsystem too - Digital TV core memory mapped support interface - new sensor driver: ov7740 - several improvements at ddbridge driver - new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel SoCs - new tuner driver: tda18250 - finally got rid of all LIRC staging drivers - as we don't have old lirc drivers anymore, restruct the lirc device code - add support for UVC metadata - add a new staging driver for NVIDIA Tegra Video Decoder Engine - DVB kAPI headers moved to include/media - synchronize the kAPI and uAPI for the DVB subsystem, removing the gap for non-legacy APIs - reduce the kAPI gap for V4L2 - lots of other driver enhancements, cleanups, etc. * tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits) media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32 media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32 media: v4l2-compat-ioctl32.c: avoid sizeof(type) media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32 media: v4l2-compat-ioctl32.c: fix the indentation media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF media: v4l2-ioctl.c: don't copy back the result for -ENOTTY media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt media: vivid: fix module load error when enabling fb and no_error_inj=1 media: dvb_demux: improve debug messages media: dvb_demux: Better handle discontinuity errors media: cxusb, dib0700: ignore XC2028_I2C_FLUSH media: ts2020: avoid integer overflows on 32 bit machines media: i2c: ov7740: use gpio/consumer.h instead of gpio.h media: entity: Add a nop variant of media_entity_cleanup ...

media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs

2018-01-31T08:09:04+00:00

If the device is of type VFL_TYPE_SUBDEV then vdev->ioctl_ops is NULL so the 'if (!ops->vidioc_query_ext_ctrl)' check would crash. Add a test for !ops to the condition. All sub-devices that have controls will use the control framework, so they do not have an equivalent to ops->vidioc_query_ext_ctrl. Returning false if ops is NULL is the correct thing to do here. Fixes: b8c601e8af ("v4l2-compat-ioctl32.c: fix ctrl_is_pointer") Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Reported-by: Laurent Pinchart Reviewed-by: Laurent Pinchart Cc: # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab

Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2018-01-31T01:58:07+00:00

Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...

media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic

2018-01-30T12:40:41+00:00

The 32-bit compat v4l2 ioctl handling is implemented based on its 64-bit equivalent. It converts 32-bit data structures into its 64-bit equivalents and needs to provide the data to the 64-bit ioctl in user space memory which is commonly allocated using compat_alloc_user_space(). However, due to how that function is implemented, it can only be called a single time for every syscall invocation. Supposedly to avoid this limitation, the existing code uses a mix of memory from the kernel stack and memory allocated through compat_alloc_user_space(). Under normal circumstances, this would not work, because the 64-bit ioctl expects all pointers to point to user space memory. As a workaround, set_fs(KERNEL_DS) is called to temporarily disable this extra safety check and allow kernel pointers. However, this might introduce a security vulnerability: The result of the 32-bit to 64-bit conversion is writeable by user space because the output buffer has been allocated via compat_alloc_user_space(). A malicious user space process could then manipulate pointers inside this output buffer, and due to the previous set_fs(KERNEL_DS) call, functions like get_user() or put_user() no longer prevent kernel memory access. The new approach is to pre-calculate the total amount of user space memory that is needed, allocate it using compat_alloc_user_space() and then divide up the allocated memory to accommodate all data structures that need to be converted. An alternative approach would have been to retain the union type karg that they allocated on the kernel stack in do_video_ioctl(), copy all data from user space into karg and then back to user space. However, we decided against this approach because it does not align with other compat syscall implementations. Instead, we tried to replicate the get_user/put_user pairs as found in other places in the kernel: if (get_user(clipcount, &up->clipcount) || put_user(clipcount, &kp->clipcount)) return -EFAULT; Notes from hans.verkuil@cisco.com: This patch was taken from: https://github.com/LineageOS/android_kernel_samsung_apq8084/commit/97b733953c06e4f0398ade18850f0817778255f7 Clearly nobody could be bothered to upstream this patch or at minimum tell us :-( We only heard about this a week ago. This patch was rebased and cleaned up. Compared to the original I also swapped the order of the convert_in_user arguments so that they matched copy_in_user. It was hard to review otherwise. I also replaced the ALLOC_USER_SPACE/ALLOC_AND_GET by a normal function. Fixes: 6b5a9492ca ("v4l: introduce string control support.") Signed-off-by: Daniel Mentz Co-developed-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Hans Verkuil Cc: # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab

media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors

2018-01-30T12:35:16+00:00

Some ioctls need to copy back the result even if the ioctl returned an error. However, don't do this for the error code -ENOTTY. It makes no sense in that cases. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Cc: # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab