kernel/linux.git/drivers/media/rc, branch v4.14.286

media: igorplugusb: receiver overflow should be reported

2022-01-27T08:00:55+00:00

[ Upstream commit 8fede658e7ddb605bbd68ed38067ddb0af033db4 ] Without this, some IR will be missing mid-stream and we might decode something which never really occurred. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: redrat3: fix control-message timeouts

2022-01-27T08:00:48+00:00

commit 2adc965c8bfa224e11ecccf9c92fd458c4236428 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: mceusb: fix control-message timeouts

2022-01-27T08:00:47+00:00

commit 16394e998cbb050730536bdf7e89f5a70efbd974 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver") Cc: stable@vger.kernel.org # 2.6.36 Signed-off-by: Johan Hovold Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: mceusb: return without resubmitting URB in case of -EPROTO error.

2021-11-26T10:40:27+00:00

[ Upstream commit 476db72e521983ecb847e4013b263072bb1110fc ] Syzkaller reported a warning called "rcu detected stall in dummy_timer". The error seems to be an error in mceusb_dev_recv(). In the case of -EPROTO error, the routine immediately resubmits the URB. Instead it should return without resubmitting URB. Reported-by: syzbot+4d3749e9612c2cfab956@syzkaller.appspotmail.com Signed-off-by: Rajat Asthana Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: ite-cir: IR receiver stop working after receive overflow

2021-11-26T10:40:21+00:00

commit fdc881783099c6343921ff017450831c8766d12a upstream. On an Intel NUC6iSYK, no IR is reported after a receive overflow. When a receiver overflow occurs, this condition is only cleared by reading the fifo. Make sure we read anything in the fifo. Fixes: 28c7afb07ccf ("media: ite-cir: check for receive overflow") Suggested-by: Bryan Pass Tested-by: Bryan Pass Cc: stable@vger.kernel.org> Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: rc-loopback: return number of emitters rather than error

2021-09-22T09:45:25+00:00

commit 6b7f554be8c92319d7e6df92fd247ebb9beb4a45 upstream. The LIRC_SET_TRANSMITTER_MASK ioctl should return the number of emitters if an invalid list was set. Cc: stable@vger.kernel.org Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: ite-cir: check for receive overflow

2021-05-22T08:57:18+00:00

[ Upstream commit 28c7afb07ccfc0a939bb06ac1e7afe669901c65a ] It's best if this condition is reported. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: mceusb: sanity check for prescaler value

2021-03-07T10:27:42+00:00

commit 9dec0f48a75e0dadca498002d25ef4e143e60194 upstream. prescaler larger than 8 would mean the carrier is at most 152Hz, which does not make sense for IR carriers. Reported-by: syzbot+6d31bf169a8265204b8d@syzkaller.appspotmail.com Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: sunxi-cir: ensure IR is handled when it is continuous

2020-12-29T12:47:04+00:00

commit 3f56df4c8ffeb120ed41906d3aae71799b7e726a upstream. If a user holds a button down on a remote, then no ir idle interrupt will be generated until the user releases the button, depending on how quickly the remote repeats. No IR is processed until that point, which means that holding down a button may not do anything. This also resolves an issue on a Cubieboard 1 where the IR receiver is picking up ambient infrared as IR and spews out endless "rc rc0: IR event FIFO is full!" messages unless you choose to live in the dark. Cc: stable@vger.kernel.org Tested-by: Hans Verkuil Acked-by: Maxime Ripard Reported-by: Hans Verkuil Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: ati_remote: sanity check for both endpoints

2020-10-29T08:07:14+00:00

[ Upstream commit a8be80053ea74bd9c3f9a3810e93b802236d6498 ] If you do sanity checks, you should do them for both endpoints. Hence introduce checking for endpoint type for the output endpoint, too. Reported-by: syzbot+998261c2ae5932458f6c@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin