kernel/linux.git/drivers/media/rc/rc-loopback.c, branch v6.12.80

media: rc: remove unused tx_resolution field

2024-07-31T09:21:56+00:00

The tx_resolution field is never read. In theory you can imagine this field being useful for detecting whether the transmitter has the resolution for the message you are trying to send, but I am not aware of any hardware where this could be an issue. Just remove. Signed-off-by: Sean Young Signed-off-by: Hans Verkuil

media: lirc: report ir receiver overflow

2022-01-28T18:32:50+00:00

If the driver reports that the hardware had an overflow, report this to userspace. It would be nice to know when this happens, and not just get a long space. This change has been tested with lircd, ir-ctl, and ir-keytable. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: rc: rename s_learning_mode() to s_wideband_receiver()

2021-07-22T06:21:53+00:00

The s_learning_mode() function is called in response to the ioctl LIRC_SET_WIDEBAND_RECEIVER, so rename it to s_wideband_receiver(). Learning mode is when both the wideband receiver is turned on and carrier reports are enabled. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: rc-loopback: max_timeout of UINT_MAX does not work

2021-07-22T06:21:03+00:00

Any timeout larger than LIRC_VALUE_MASK cannot work for the lirc uapi. LIRC_VALUE_MASK is about 16 seconds which is more than enough. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: rc-loopback: send carrier reports

2021-07-22T06:20:33+00:00

When carrier reports are enabled, send them over loopback. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: rc-loopback: use dev_dbg() rather than handrolled debug

2021-07-22T06:19:56+00:00

Make use of dynamic debug. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: rc-loopback: return number of emitters rather than error

2021-07-22T06:19:17+00:00

The LIRC_SET_TRANSMITTER_MASK ioctl should return the number of emitters if an invalid list was set. Cc: stable@vger.kernel.org Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: rc: harmonize infrared durations to microseconds

2020-09-03T14:18:55+00:00

rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" Cc: Hans Verkuil Cc: Maxim Levitsky Cc: Patrick Lerda Cc: Kevin Hilman Cc: Neil Armstrong Cc: Jerome Brunet Cc: Martin Blumenstingl Cc: Sean Wang Cc: Matthias Brugger Cc: Patrice Chotard Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: "David Härdeman" Cc: Benjamin Valentin Cc: Antti Palosaari Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

2019-05-30T18:26:37+00:00

Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Reviewed-by: Kate Stewart Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman

media: rc: Remove init_ir_raw_event and DEFINE_IR_RAW_EVENT macros

2018-10-04T18:22:27+00:00

This can be done with c99 initializers, which makes the code cleaner and more transparent. It does require gcc 4.6, because of this bug in earlier versions: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676 Since commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6"), this is the case. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab