kernel/linux.git/drivers/media/platform, branch v4.19.112

media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run()

2020-02-24T07:34:36+00:00

[ Upstream commit bb6d42061a05d71dd73f620582d9e09c8fbf7f5b ] The driver may sleep while holding a spinlock. The function call path (from bottom to top) in Linux 4.19 is: drivers/media/platform/sti/bdisp/bdisp-hw.c, 385: msleep in bdisp_hw_reset drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 341: bdisp_hw_reset in bdisp_device_run drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 317: _raw_spin_lock_irqsave in bdisp_device_run To fix this bug, msleep() is replaced with udelay(). This bug is found by a static analysis tool STCheck written by myself. Signed-off-by: Jia-Ju Bai Reviewed-by: Fabien Dessenne Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: atmel: atmel-isi: fix timeout value for stop streaming

2020-01-27T13:51:06+00:00

[ Upstream commit 623fd246bb40234fe68dd4e7c1f1f081f9c45a3d ] In case of sensor malfunction, stop streaming timeout takes much longer than expected. This is due to conversion of time to jiffies: milliseconds multiplied with HZ (ticks/second) gives out a value of jiffies with 10^3 greater. We need to also divide by 10^3 to obtain the right jiffies value. In other words FRAME_INTERVAL_MILLI_SEC must be in seconds in order to multiply by HZ and get the right jiffies value to add to the current jiffies for the timeout expire time. Fixes: 195ebc43bf76 ("[media] V4L: at91: add Atmel Image Sensor Interface (ISI) support") Signed-off-by: Alexandre Kroupski Reviewed-by: Eugen Hristev Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: rcar-vin: Clean up correct notifier in error path

2020-01-27T13:51:02+00:00

[ Upstream commit 0bd465765f8d1300040de627f0a0971a8849d654 ] The parallel input initialization error path cleans up the wrong async notifier, fix this by cleaning up the correct notifier. Fixes: 9863bc8695bc36e3 ("media: rcar-vin: Cleanup notifier in error path") Signed-off-by: Niklas Söderlund Reviewed-by: Jacopo Mondi Tested-by: Geert Uytterhoeven Reviewed-by: Kieran Bingham Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: vivid: fix incorrect assignment operation when setting video mode

2020-01-27T13:50:53+00:00

[ Upstream commit d4ec9550e4b2d2e357a46fdc65d8ef3d4d15984c ] The assigment of FB_VMODE_NONINTERLACE to var->vmode should be a bit-wise or of FB_VMODE_NONINTERLACE instead of an assignment, otherwise the previous clearing of the FB_VMODE_MASK bits of var->vmode makes no sense and is redundant. Addresses-Coverity: ("Unused value") Fixes: ad4e02d5081d ("[media] vivid: add a simple framebuffer device for overlay testing") Signed-off-by: Colin Ian King Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: davinci/vpbe: array underflow in vpbe_enum_outputs()

2020-01-27T13:50:47+00:00

[ Upstream commit b72845ee5577b227131b1fef23f9d9a296621d7b ] In vpbe_enum_outputs() we check if (temp_index >= cfg->num_outputs) but the problem is that "temp_index" can be negative. This patch changes the types to unsigned to address this array underflow bug. Fixes: 66715cdc3224 ("[media] davinci vpbe: VPBE display driver") Signed-off-by: Dan Carpenter Acked-by: "Lad, Prabhakar" Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: omap_vout: potential buffer overflow in vidioc_dqbuf()

2020-01-27T13:50:46+00:00

[ Upstream commit dd6e2a981bfe83aa4a493143fd8cf1edcda6c091 ] The "b->index" is a u32 the comes from the user in the ioctl. It hasn't been checked. We aren't supposed to use it but we're instead supposed to use the value that gets written to it when we call videobuf_dqbuf(). The videobuf_dqbuf() first memsets it to zero and then re-initializes it inside the videobuf_status() function. It's this final value which we want. Hans Verkuil pointed out that we need to check the return from videobuf_dqbuf(). I ended up doing a little cleanup related to that as well. Fixes: 72915e851da9 ("[media] V4L2: OMAP: VOUT: dma map and unmap v4l2 buffers in qbuf and dqbuf") Signed-off-by: Dan Carpenter Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: davinci-isif: avoid uninitialized variable use

2020-01-27T13:50:35+00:00

[ Upstream commit 0e633f97162c1c74c68e2eb20bbd9259dce87cd9 ] clang warns about a possible variable use that gcc never complained about: drivers/media/platform/davinci/isif.c:982:32: error: variable 'frame_size' is uninitialized when used here [-Werror,-Wuninitialized] dm365_vpss_set_pg_frame_size(frame_size); ^~~~~~~~~~ drivers/media/platform/davinci/isif.c:887:2: note: variable 'frame_size' is declared here struct vpss_pg_frame_size frame_size; ^ 1 error generated. There is no initialization for this variable at all, and there has never been one in the mainline kernel, so we really should not put that stack data into an mmio register. On the other hand, I suspect that gcc checks the condition more closely and notices that the global isif_cfg.bayer.config_params.test_pat_gen flag is initialized to zero and never written to from any code path, so anything depending on it can be eliminated. To shut up the clang warning, just remove the dead code manually, it has probably never been used because any attempt to do so would have resulted in undefined behavior. Fixes: 63e3ab142fa3 ("V4L/DVB: V4L - vpfe capture - source for ISIF driver on DM365") Signed-off-by: Arnd Bergmann Reviewed-by: Nathan Chancellor Acked-by: Lad, Prabhakar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL

2020-01-27T13:50:13+00:00

[ Upstream commit 19c624c6b29e244c418f8b44a711cbf5e82e3cd4 ] This commit corrects max and step values for v4l2 control for V4L2_CID_JPEG_RESTART_INTERVAL. Max should be 0xffff and step should be 1. It was found by using v4l2-compliance tool and checking result of VIDIOC_QUERY_EXT_CTRL/QUERYMENU test. Previously it was complaining that step was bigger than difference between max and min. Fixes: 15f4bc3b1f42 ("[media] s5p-jpeg: Add JPEG controls support") Signed-off-by: Pawe? Chmiel Reviewed-by: Jacek Anaszewski Reviewed-by: Sylwester Nawrocki Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: exynos4-is: Fix recursive locking in isp_video_release()

2020-01-17T18:47:11+00:00

commit 704c6c80fb471d1bb0ef0d61a94617d1d55743cd upstream. >From isp_video_release(), &isp->video_lock is held and subsequent vb2_fop_release() tries to lock vdev->lock which is same with the previous one. Replace vb2_fop_release() with _vb2_fop_release() to fix the recursive locking. Fixes: 1380f5754cb0 ("[media] videobuf2: Add missing lock held on vb2_fop_release") Signed-off-by: Seung-Woo Kim Reviewed-by: Sylwester Nawrocki Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: v4l: cadence: Fix how unsued lanes are handled in 'csi2rx_start()'

2020-01-17T18:47:11+00:00

commit 2eca8e4c1df4864b937752c3aa2f7925114f4806 upstream. The 2nd parameter of 'find_first_zero_bit()' is a number of bits, not of bytes. So use 'csi2rx->max_lanes' instead of 'sizeof(lanes_used)'. Fixes: 1fc3b37f34f6 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver") Signed-off-by: Christophe JAILLET Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman