kernel/linux.git/drivers/media/platform/tegra-cec, branch linux-4.16.y

media: tegra-cec: reset rx_buf_cnt when start bit detected

2018-03-05T12:46:24+00:00

If a start bit is detected, then reset the receive buffer counter to 0. This ensures that no stale data is in the buffer if a message is broken off midstream due to e.g. a Low Drive condition and then retransmitted. The only Rx interrupts we need to listen to are RX_REGISTER_FULL (i.e. a valid byte was received) and RX_START_BIT_DETECTED (i.e. a new message starts and we need to reset the counter). Signed-off-by: Hans Verkuil Cc: # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab

media: tegra-cec: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

2017-12-08T16:15:17+00:00

This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/tegra-cec/tegra_cec.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: tegra-cec: fix messy probe() cleanup

2017-10-31T11:23:52+00:00

The probe() cleanup code ('goto foo_error') was very messy. It appears that this code wasn't updated when I switched to the devm_ functions in an earlier version. Update the code to use 'return error' where it can and do proper cleanup where it needs to. Note that the original code wasn't buggy, it was just messy. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: tegra-cec: add Tegra HDMI CEC driver

2017-10-27T13:48:57+00:00

This driver adds support for the Tegra CEC IP. It is based on the NVIDIA drivers/misc/tegra-cec driver in their 3.10 kernel. This has been converted to the CEC framework and cleaned up. Tested with my Jetson TK1 board. It has also been tested with the Tegra X1 in an embedded product. Note of warning for the Tegra X2: this SoC supports two HDMI outputs, but only one CEC adapter and the CEC bus is shared between the two outputs. This is a design mistake and the CEC adapter can control only one HDMI output. Never hook up both HDMI outputs to the CEC bus in a hardware design: this is illegal as per the CEC specification. The CEC bus can be shared between multiple inputs and zero or one outputs, but not between multiple outputs. Signed-off-by: Hans Verkuil Acked-by: Thierry Reding Signed-off-by: Mauro Carvalho Chehab