kernel/linux.git/drivers/media/platform/qcom, branch v6.3.2

media: venus: dec: Fix capture formats enumeration order

2023-05-11T14:17:09+00:00

[ Upstream commit a9d45ec74c8e68aaafe90191928eddbf79f4644f ] Commit 9593126dae3e ("media: venus: Add a handling of QC08C compressed format") and commit cef92b14e653 ("media: venus: Add a handling of QC10C compressed format") added support for the QC08C and QC10C compressed formats respectively. But these also caused a regression, because the new formats where added at the beginning of the vdec_formats[] array and the vdec_inst_init() function sets the default format output and capture using fixed indexes of that array: static void vdec_inst_init(struct venus_inst *inst) { ... inst->fmt_out = &vdec_formats[8]; inst->fmt_cap = &vdec_formats[0]; ... } Since now V4L2_PIX_FMT_NV12 is not the first entry in the array anymore, the default capture format is not set to that as it was done before. Both commits changed the first index to keep inst->fmt_out default format set to V4L2_PIX_FMT_H264, but did not update the latter to keep .fmt_out default format set to V4L2_PIX_FMT_NV12. Rather than updating the index to the current V4L2_PIX_FMT_NV12 position, let's reorder the entries so that this format is the first entry again. This would also make VIDIOC_ENUM_FMT report the V4L2_PIX_FMT_NV12 format with an index 0 as it did before the QC08C and QC10C formats were added. Fixes: 9593126dae3e ("media: venus: Add a handling of QC08C compressed format") Fixes: cef92b14e653 ("media: venus: Add a handling of QC10C compressed format") Signed-off-by: Javier Martinez Canillas Signed-off-by: Stanimir Varbanov Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: venus: dec: Fix handling of the start cmd

2023-05-11T14:17:09+00:00

[ Upstream commit 50248ad9f190d527cbd578190ca769729518b703 ] The decoder driver should clear the last_buffer_dequeued flag of the capture queue upon receiving V4L2_DEC_CMD_START. The last_buffer_dequeued flag is set upon receiving EOS (which always happens upon receiving V4L2_DEC_CMD_STOP). Without this patch, after issuing the V4L2_DEC_CMD_STOP and V4L2_DEC_CMD_START, the vb2_dqbuf() function will always fail, even if the buffers are completed by the hardware. Fixes: beac82904a87 ("media: venus: make decoder compliant with stateful codec API") Signed-off-by: Michał Krawczyk Signed-off-by: Stanimir Varbanov Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

Revert "venus: firmware: Correct non-pix start and end addresses"

2023-04-02T17:47:03+00:00

This reverts commit a837e5161cff, which broke probing of the venus driver, at least on the SC7180 SoC HP X2 Chromebook: qcom-venus aa00000.video-codec: Adding to iommu group 11 qcom-venus aa00000.video-codec: non legacy binding qcom-venus aa00000.video-codec: failed to reset venus core qcom-venus: probe of aa00000.video-codec failed with error -110 Matthias Kaehlcke also reported that the same change caused a regression in SC7180 and sc7280, that prevents AOSS from entering sleep mode during system suspend. So let's revert this commit for now to fix both issues. Fixes: a837e5161cff ("venus: firmware: Correct non-pix start and end addresses") Reported-by: Matthias Kaehlcke Signed-off-by: Javier Martinez Canillas Signed-off-by: Linus Torvalds

Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-02-27T18:04:49+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ...

Merge tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2023-02-26T19:47:26+00:00

Pull media updates from Mauro Carvalho Chehab: - Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye, stkwebcam, tm6000, vpfe_capture and zr364xx - saa7146 recovered from staging/deprecated. We opted to give ti a chance, and, instead of deprecating it, the intention is to write patches migrating it from VB1 to VB2. - av7110 returned from staging/deprecated/ to staging/ as we're not planning on dropping it any time soon - media controller API has gained experimental support for G_ROUTING and streams API. No drivers use it right now. We're planning to add one after -rc1, giving some time to experience the API and eventually have changes during the next development cycle - New sensor drivers: imx296, imx415, ov8858 - Atomisp had lots of changes, specially on its sensor's interface, making atomisp sensor drivers closer to normal sensor drivers - media controller kAPI has gained some helpers to traverse pipelines - uvcvideo now better support power line control - lots of bug fixes, cleanups and driver improvements * tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits) media: imx-mipi-csis: Check csis_fmt validity before use media: v4l2-subdev.c: clear stream field media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci" media: Revert "media: av7110: move to staging/media/deprecated/saa7146" media: imx-pxp: convert to regmap media: imx-pxp: Use non-threaded IRQ media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers media: imx-pxp: Implement frame size enumeration media: imx-pxp: Pass pixel format value to find_format() media: imx-pxp: Add media controller support media: imx-pxp: Don't set bus_info manually in .querycap() media: imx-pxp: Sort headers alphabetically media: imx-pxp: add support for i.MX7D media: imx-pxp: make data_path_ctrl0 platform dependent media: imx-pxp: disable LUT block media: imx-pxp: explicitly disable unused blocks media: imx-pxp: extract helper function to setup data path media: imx-pxp: detect PXP version media: dt-bindings: media: fsl-pxp: convert to yaml ...

firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/

2023-02-09T03:15:16+00:00

Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h. This removes 1 of a few remaining Qualcomm-specific headers into a more approciate subdirectory under include/. Suggested-by: Bjorn Andersson Signed-off-by: Elliot Berman Reviewed-by: Guru Das Srinagesh Acked-by: Mukesh Ojha Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com

media: camss: csiphy-3ph: avoid undefined behavior

2023-02-08T06:23:39+00:00

Marking a case of the switch statement as unreachable means the compiler treats it as undefined behavior, which is then caught by an objtool warning: drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.o: warning: objtool: csiphy_lanes_enable() falls through to next function csiphy_lanes_disable() Instead of simply continuing execution at a random place of the driver, print a warning and return from to the caller, which makes it possible to understand what happens and avoids the warning. Fixes: 53655d2a0ff2 ("media: camss: csiphy-3ph: add support for SM8250 CSI DPHY") Signed-off-by: Arnd Bergmann Reviewed-by: Robert Foss Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

iommu: Add a gfp parameter to iommu_map()

2023-01-25T10:52:00+00:00

The internal mechanisms support this, but instead of exposting the gfp to the caller it wrappers it into iommu_map() and iommu_map_atomic() Fix this instead of adding more variants for GFP_KERNEL_ACCOUNT. Reviewed-by: Kevin Tian Signed-off-by: Jason Gunthorpe Reviewed-by: Mathieu Poirier Link: https://lore.kernel.org/r/1-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel

Merge tag 'tag-venus-for-v6.2' of git://linuxtv.org/svarbanov/media_tree into media_stage

2022-11-15T11:53:57+00:00

Venus updates for v6.2 * tag 'tag-venus-for-v6.2' of git://linuxtv.org/svarbanov/media_tree: venus: pm_helpers: Fix error check in vcodec_domains_get() venus: firmware: Correct assertion of reset bit on remote processor venus: firmware: Correct non-pix start and end addresses venus: firmware: Correct reset bit MAINTAINERS: Change email for Venus driver MAINTAINERS: Add Vikash as VENUS video driver co-maintainer

media: camss: Split power domain management

2022-11-08T08:41:36+00:00

There are three cases of power domain management on supported platforms: 1) CAMSS on MSM8916, where a single VFE power domain is operated outside of the camss device driver, 2) CAMSS on MSM8996 and SDM630/SDM660, where two VFE power domains are managed separately by the camss device driver, the power domains are linked and unlinked on demand by their functions vfe_pm_domain_on() and vfe_pm_domain_off() respectively, 3) CAMSS on SDM845 and SM8250 platforms, and there are two VFE power domains and their parent power domain TITAN_TOP, the latter one shall be turned on prior to turning on any of VFE power domains. Due to a previously missing link between TITAN_TOP and VFEx power domains in the latter case, which is now fixed by [1], it was decided always to turn on all found VFE power domains and TITAN_TOP power domain, even if just one particular VFE is needed to be enabled or none of VFE power domains are required, for instance the latter case is when vfe_lite is in use. This misusage becomes more incovenient and clumsy, if next generations are to be supported, for instance CAMSS on SM8450 has three VFE power domains. The change splits the power management support for platforms with TITAN_TOP parent power domain, and, since 'power-domain-names' property is not present in camss device tree nodes, the assumption is that the first N power domains from the 'power-domains' list correspond to VFE power domains, and, if the number of power domains is greater than number of non-lite VFEs, then the last power domain from the list is the TITAN_TOP power domain. Signed-off-by: Vladimir Zapolskiy Reviewed-by: Robert Foss Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab