kernel/linux.git/drivers/media/pci, branch linux-4.16.y

media: cx25821: prevent out-of-bounds read on array card

2018-05-25T14:46:18+00:00

[ Upstream commit 67300abdbe9f1717532aaf4e037222762716d0f6 ] Currently an out of range dev->nr is detected by just reporting the issue and later on an out-of-bounds read on array card occurs because of this. Fix this by checking the upper range of dev->nr with the size of array card (removes the hard coded size), move this check earlier and also exit with the error -ENOSYS to avoid the later out-of-bounds array read. Detected by CoverityScan, CID#711191 ("Out-of-bounds-read") Fixes: commit 02b20b0b4cde ("V4L/DVB (12730): Add conexant cx25821 driver") Signed-off-by: Colin Ian King Signed-off-by: Hans Verkuil [hans.verkuil@cisco.com: %ld -> %zd] Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

media: cx23885: Set subdev host data to clk_freq pointer

2018-05-25T14:46:17+00:00

[ Upstream commit 5ceade1d97fc6687e050c44c257382c192f56276 ] Currently clk_freq is ignored entirely, because the cx235840 driver configures the xtal at the chip defaults. This is an issue if a board is produced with a non-default frequency crystal. If clk_freq is not zero the cx25840 will attempt to use the setting provided, or fall back to defaults otherwise. Signed-off-by: Brad Love Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

media: cx23885: Override 888 ImpactVCBe crystal frequency

2018-05-25T14:46:17+00:00

[ Upstream commit 779c79d4b833ec646b0aed878da38edb45bbe156 ] Hauppauge produced a revision of ImpactVCBe using an 888, with a 25MHz crystal, instead of using the default third overtone 50Mhz crystal. This overrides that frequency so that the cx25840 is properly configured. Without the proper crystal setup the cx25840 cannot load the firmware or decode video. Signed-off-by: Brad Love Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

media: dvb: update buffer mmaped flags and frame counter

2018-02-23T16:44:08+00:00

Now that we have support for a buffer counter and for error flags, update them at DMX_DQBUF. Signed-off-by: Mauro Carvalho Chehab

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03+00:00

This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^$[^\"]*$$\$/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro Signed-off-by: Linus Torvalds

Merge tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2018-02-06T19:27:48+00:00

Pull media updates from Mauro Carvalho Chehab: - videobuf2 was moved to a media/common dir, as it is now used by the DVB subsystem too - Digital TV core memory mapped support interface - new sensor driver: ov7740 - several improvements at ddbridge driver - new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel SoCs - new tuner driver: tda18250 - finally got rid of all LIRC staging drivers - as we don't have old lirc drivers anymore, restruct the lirc device code - add support for UVC metadata - add a new staging driver for NVIDIA Tegra Video Decoder Engine - DVB kAPI headers moved to include/media - synchronize the kAPI and uAPI for the DVB subsystem, removing the gap for non-legacy APIs - reduce the kAPI gap for V4L2 - lots of other driver enhancements, cleanups, etc. * tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits) media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32 media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32 media: v4l2-compat-ioctl32.c: avoid sizeof(type) media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32 media: v4l2-compat-ioctl32.c: fix the indentation media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF media: v4l2-ioctl.c: don't copy back the result for -ENOTTY media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt media: vivid: fix module load error when enabling fb and no_error_inj=1 media: dvb_demux: improve debug messages media: dvb_demux: Better handle discontinuity errors media: cxusb, dib0700: ignore XC2028_I2C_FLUSH media: ts2020: avoid integer overflows on 32 bit machines media: i2c: ov7740: use gpio/consumer.h instead of gpio.h media: entity: Add a nop variant of media_entity_cleanup ...

Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2018-01-31T01:58:07+00:00

Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...

media: intel-ipu3: cio2: fixup off-by-one bug in cio2_vb2_buf_init

2018-01-23T13:08:44+00:00

With "pages" initialized to vb length + 1 pages, the condition check if(!pages--) will break at one more page than intended, this can result in out-of-bound access to b->lop[i][j] when setting the last dummy page. Fixes: c7cbef1fdb54 ("media: intel-ipu3: cio2: fix a crash with out-of-bounds access") Signed-off-by: Yong Zhi Signed-off-by: Cao Bing Bu Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: intel-ipu3: cio2: mark more PM functions as __maybe_unused

2018-01-23T13:07:29+00:00

My earlier patch missed two functions, these must be __maybe_unused as well: drivers/media/pci/intel/ipu3/ipu3-cio2.c:1867:12: error: 'cio2_runtime_resume' defined but not used [-Werror=unused-function] drivers/media/pci/intel/ipu3/ipu3-cio2.c:1849:12: error: 'cio2_runtime_suspend' defined but not used [-Werror=unused-function] Fixes: 2086dd35705f ("media: intel-ipu3: cio2: mark PM functions as __maybe_unused") Signed-off-by: Arnd Bergmann Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: cobalt: select CONFIG_SND_PCM

2018-01-23T13:05:01+00:00

The cobalt sound driver has a dependency on ALSA, but not on the PCM helper code, so this can lead to an extremely rare link error in randconfig builds: ERROR: "snd_pcm_period_elapsed" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "_snd_pcm_stream_lock_irqsave" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_hw_constraint_integer" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_set_ops" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_stream_unlock_irqrestore" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_lib_ioctl" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_new" [drivers/media/pci/cobalt/cobalt.ko] undefined! The other audio drivers select 'SND_PCM' for this, so let's do the same. Signed-off-by: Arnd Bergmann Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab