kernel/linux.git/drivers/media/i2c, branch v6.19.12

media: i2c: ov01a10: Fix digital gain range

2026-03-04T12:21:15+00:00

[ Upstream commit 91848c99ed6a98daf77f4cb7d44cf3f13bc6998f ] Digital gain wraps-around at the maximum of 16838 / 0x3fff. Fix the maximum digital gain by setting it to 0x3fff. Signed-off-by: Mehdi Djait Reviewed-by: Hans de Goede Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: dw9714: Fix powerup sequence

2026-03-04T12:21:11+00:00

[ Upstream commit 401aec35ac7bd04b4018a519257b945abb88e26c ] We have experienced seen multiple I2C errors while doing stress test on the module: dw9714 i2c-PRP0001:01: dw9714_vcm_resume I2C failure: -5 dw9714 i2c-PRP0001:01: I2C write fail Inspecting the powerup sequence we found that it does not match the documentation at: https://blog.arducam.com/downloads/DW9714A-DONGWOON(Autofocus_motor_manual).pdf """ (2) DW9714A requires waiting time of 12ms after power on. During this waiting time, the offset calibration of internal amplifier is operating for minimization of output offset current . """ This patch increases the powerup delay to follow the documentation. Fixes: 9d00ccabfbb5 ("media: i2c: dw9714: Fix occasional probe errors") Signed-off-by: Ricardo Ribalda Reviewed-by: Hans de Goede Tested-by: Neil Sun Reported-by: Naomi Huang Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: i2c: ov5647: use our own mutex for the ctrl lock

2026-03-04T12:21:11+00:00

[ Upstream commit 973e42fd5d2b397bff34f0c249014902dbf65912 ] __v4l2_ctrl_handler_setup() and __v4l2_ctrl_modify_range() contains an assertion to verify that the v4l2_ctrl_handler::lock is held, as it should only be called when the lock has already been acquired. Therefore use our own mutex for the ctrl lock, otherwise a warning will be reported. Fixes: 4974c2f19fd8 ("media: ov5647: Support gain, exposure and AWB controls") Cc: stable@vger.kernel.org Signed-off-by: Xiaolei Wang [Sakari Ailus: Fix a minor conflict.] Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: ccs: Fix setting initial sub-device state

2026-03-04T12:21:11+00:00

[ Upstream commit 31e5191aa11931b53e1242acef4f4375f00ca523 ] Fix setting sub-device state for non-source sub-devices. Fixes: 5755be5f15d9 ("media: v4l2-subdev: Rename .init_cfg() operation to .init_state()") Cc: stable@vger.kernel.org # for v6.8 and later Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: i2c: ov5647: Fix PIXEL_RATE value for VGA mode

2026-03-04T12:21:11+00:00

[ Upstream commit c063632b494b02e891442d10f17e37b7fcfab9b3 ] The pixel rate for VGA (640x480) mode is configured in the mode's table to be 58.333 MPix/s instead of 55 MPix/s, so fix it. Fixes: 911f4516ee2b ("media: ov5647: Support V4L2_CID_PIXEL_RATE") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/CAPY8ntA2TCf9FuB6Nk%2BOn%2By6N_PMuYPAOAr3Yx8YESwe4skWvw@mail.gmail.com/ Suggested-by: Dave Stevenson Signed-off-by: Jai Luthra Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: i2c: ov5647: Sensor should report RAW color space

2026-03-04T12:21:11+00:00

[ Upstream commit f007586b1e89dcea40168415d0422cb7a0fc31b1 ] As this sensor captures RAW bayer frames, the colorspace should be V4L2_COLORSPACE_RAW instead of SRGB. Fixes: a8df5af695a1 ("media: ov5647: Add SGGBR10_1X10 modes") Cc: stable@vger.kernel.org Signed-off-by: David Plowman Reviewed-by: Jacopo Mondi Signed-off-by: Jai Luthra Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: i2c: ov5647: Correct minimum VBLANK value

2026-03-04T12:21:11+00:00

[ Upstream commit 1438248c5a82c86b4e1f0311c3bb827af747a8cf ] Trial and error reveals that the minimum vblank value appears to be 24 (the OV5647 data sheet does not give any clues). This fixes streaming lock-ups in full resolution mode. Fixes: 2512c06441e3 ("media: ov5647: Support V4L2_CID_VBLANK control") Cc: stable@vger.kernel.org Signed-off-by: David Plowman Reviewed-by: Jacopo Mondi Signed-off-by: Jai Luthra Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: i2c: ov5647: Correct pixel array offset

2026-03-04T12:21:11+00:00

[ Upstream commit a4e62e597f21bb37db0ad13aca486094e9188167 ] The top offset in the pixel array is actually 6 (see page 3-1 of the OV5647 data sheet). Fixes: 14f70a3232aa ("media: ov5647: Add support for get_selection()") Cc: stable@vger.kernel.org Signed-off-by: David Plowman Reviewed-by: Jacopo Mondi Signed-off-by: Jai Luthra Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: i2c: ov5647: Initialize subdev before controls

2026-03-04T12:21:10+00:00

[ Upstream commit eee13cbccacb6d0a3120c126b8544030905b069d ] In ov5647_init_controls() we call v4l2_get_subdevdata, but it is initialized by v4l2_i2c_subdev_init() in the probe, which currently happens after init_controls(). This can result in a segfault if the error condition is hit, and we try to access i2c_client, so fix the order. Fixes: 4974c2f19fd8 ("media: ov5647: Support gain, exposure and AWB controls") Cc: stable@vger.kernel.org Suggested-by: Jacopo Mondi Signed-off-by: Jai Luthra Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: ccs: Avoid possible division by zero

2026-03-04T12:21:10+00:00

[ Upstream commit 679f0b7b6a409750a25754c8833e268e5fdde742 ] Calculating maximum M for scaler configuration involves dividing by MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably non-zero, the driver was missing the check it in fact was. Fix this. Reported-by: Josh Poimboeuf Closes: https://lore.kernel.org/all/ahukd6b3wonye3zgtptvwzvrxldcruazs2exfvll6etjhmcxyj@vq3eh6pd375b/ Fixes: ccfc97bdb5ae ("[media] smiapp: Add driver") Cc: stable@vger.kernel.org # for 5.15 and later Signed-off-by: Sakari Ailus Reviewed-by: Nathan Chancellor Tested-by: Nathan Chancellor # build Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin