kernel/linux.git/drivers/media/i2c, branch v6.12.80

media: dw9714: Fix powerup sequence

2026-03-13T16:20:22+00:00

[ Upstream commit 401aec35ac7bd04b4018a519257b945abb88e26c ] We have experienced seen multiple I2C errors while doing stress test on the module: dw9714 i2c-PRP0001:01: dw9714_vcm_resume I2C failure: -5 dw9714 i2c-PRP0001:01: I2C write fail Inspecting the powerup sequence we found that it does not match the documentation at: https://blog.arducam.com/downloads/DW9714A-DONGWOON(Autofocus_motor_manual).pdf """ (2) DW9714A requires waiting time of 12ms after power on. During this waiting time, the offset calibration of internal amplifier is operating for minimization of output offset current . """ This patch increases the powerup delay to follow the documentation. Fixes: 9d00ccabfbb5 ("media: i2c: dw9714: Fix occasional probe errors") Signed-off-by: Ricardo Ribalda Reviewed-by: Hans de Goede Tested-by: Neil Sun Reported-by: Naomi Huang Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: dw9714: add support for powerdown pin

2026-03-13T16:20:22+00:00

[ Upstream commit 03dca1842421b068d6a65b8ae16e2191882c7753 ] Add support for the powerdown pin (xSD), which can be used to put the VCM driver into power down mode. This is useful, for example, if the VCM driver's power supply cannot be controlled. The use of the powerdown pin is optional. Signed-off-by: Matthias Fend Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Stable-dep-of: 401aec35ac7b ("media: dw9714: Fix powerup sequence") Signed-off-by: Sasha Levin

media: dw9714: move power sequences to dedicated functions

2026-03-13T16:20:22+00:00

[ Upstream commit 1eefe42e9de503e422a9c925eebdbd215ee28966 ] Move the power-up and power-down sequences to their own functions. This is a preparation for the upcoming powerdown pin support. Signed-off-by: Matthias Fend Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Stable-dep-of: 401aec35ac7b ("media: dw9714: Fix powerup sequence") Signed-off-by: Sasha Levin

media: i2c: ov01a10: Fix digital gain range

2026-03-04T12:21:45+00:00

[ Upstream commit 91848c99ed6a98daf77f4cb7d44cf3f13bc6998f ] Digital gain wraps-around at the maximum of 16838 / 0x3fff. Fix the maximum digital gain by setting it to 0x3fff. Signed-off-by: Mehdi Djait Reviewed-by: Hans de Goede Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: i2c: ov5647: use our own mutex for the ctrl lock

2026-03-04T12:21:43+00:00

[ Upstream commit 973e42fd5d2b397bff34f0c249014902dbf65912 ] __v4l2_ctrl_handler_setup() and __v4l2_ctrl_modify_range() contains an assertion to verify that the v4l2_ctrl_handler::lock is held, as it should only be called when the lock has already been acquired. Therefore use our own mutex for the ctrl lock, otherwise a warning will be reported. Fixes: 4974c2f19fd8 ("media: ov5647: Support gain, exposure and AWB controls") Cc: stable@vger.kernel.org Signed-off-by: Xiaolei Wang [Sakari Ailus: Fix a minor conflict.] Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: ccs: Fix setting initial sub-device state

2026-03-04T12:21:43+00:00

[ Upstream commit 31e5191aa11931b53e1242acef4f4375f00ca523 ] Fix setting sub-device state for non-source sub-devices. Fixes: 5755be5f15d9 ("media: v4l2-subdev: Rename .init_cfg() operation to .init_state()") Cc: stable@vger.kernel.org # for v6.8 and later Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: i2c: ov5647: Fix PIXEL_RATE value for VGA mode

2026-03-04T12:21:43+00:00

[ Upstream commit c063632b494b02e891442d10f17e37b7fcfab9b3 ] The pixel rate for VGA (640x480) mode is configured in the mode's table to be 58.333 MPix/s instead of 55 MPix/s, so fix it. Fixes: 911f4516ee2b ("media: ov5647: Support V4L2_CID_PIXEL_RATE") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/CAPY8ntA2TCf9FuB6Nk%2BOn%2By6N_PMuYPAOAr3Yx8YESwe4skWvw@mail.gmail.com/ Suggested-by: Dave Stevenson Signed-off-by: Jai Luthra Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: i2c: ov5647: Sensor should report RAW color space

2026-03-04T12:21:42+00:00

[ Upstream commit f007586b1e89dcea40168415d0422cb7a0fc31b1 ] As this sensor captures RAW bayer frames, the colorspace should be V4L2_COLORSPACE_RAW instead of SRGB. Fixes: a8df5af695a1 ("media: ov5647: Add SGGBR10_1X10 modes") Cc: stable@vger.kernel.org Signed-off-by: David Plowman Reviewed-by: Jacopo Mondi Signed-off-by: Jai Luthra Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: i2c: ov5647: Correct minimum VBLANK value

2026-03-04T12:21:42+00:00

[ Upstream commit 1438248c5a82c86b4e1f0311c3bb827af747a8cf ] Trial and error reveals that the minimum vblank value appears to be 24 (the OV5647 data sheet does not give any clues). This fixes streaming lock-ups in full resolution mode. Fixes: 2512c06441e3 ("media: ov5647: Support V4L2_CID_VBLANK control") Cc: stable@vger.kernel.org Signed-off-by: David Plowman Reviewed-by: Jacopo Mondi Signed-off-by: Jai Luthra Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: i2c: ov5647: Correct pixel array offset

2026-03-04T12:21:42+00:00

[ Upstream commit a4e62e597f21bb37db0ad13aca486094e9188167 ] The top offset in the pixel array is actually 6 (see page 3-1 of the OV5647 data sheet). Fixes: 14f70a3232aa ("media: ov5647: Add support for get_selection()") Cc: stable@vger.kernel.org Signed-off-by: David Plowman Reviewed-by: Jacopo Mondi Signed-off-by: Jai Luthra Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin