kernel/linux.git/drivers/media/i2c/Makefile, branch linux-7.0.y

media: i2c: add os05b10 image sensor driver

2026-01-12T07:43:11+00:00

Add a v4l2 subdevice driver for the Omnivision OS05B10 sensor. The Omnivision OS05B10 image sensor with an active array size of 2592 x 1944. The following features are supported: - Manual exposure an gain control support - vblank/hblank control support - Supported resolution: 2592 x 1944 @ 60fps (SBGGR10) Co-developed-by: Elgin Perumbilly Signed-off-by: Elgin Perumbilly Signed-off-by: Himanshu Bhavani Reviewed-by: Vladimir Zapolskiy Reviewed-by: Mehdi Djait Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: Add Samsung S5K3M5 13MP camera sensor driver

2026-01-12T07:43:11+00:00

Samsung S5K3M5 (ISOCELL 3M5) is a 13MP image sensor, it produces Bayer GRBG (2x2) frames in RAW10 output format, the maximum supported output resolution is 4208x3120 at 30 frames per second. Tested-by: Neil Armstrong # on SM8550-QRD Signed-off-by: Vladimir Zapolskiy Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: add Samsung S5KJN1 image sensor device driver

2026-01-12T07:43:11+00:00

Samsung S5KJN1 is a 50MP image sensor, it produces Bayer GRBG (2x2) frames in RAW10 output format, the maximum supported output resolution is 8160x6144 at 10 frames per second. Tested-by: Neil Armstrong # on SM8650-QRD Signed-off-by: Vladimir Zapolskiy Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: add Sony IMX111 CMOS camera sensor driver

2025-11-13T10:33:39+00:00

Add a v4l2 sub-device driver for the Sony IMX111 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure, digital and analog gain control support - pixel rate/link freq control support - supported resolution up to 3280x2464 for single shot capture - supported resolution up to 1920x1080 @ 30fps for video - supported bayer order output SGBRG10 and SGBRG8 Camera module seems to be partially compatible with Nokia SMIA but it lacks a few registers required for clock calculations and has different vendor-specific per-mode configurations which makes it incompatible with existing CCS driver. Signed-off-by: Svyatoslav Ryhel [Sakari Ailus: Fix set_fmt() callback a bit and idle after autosuspend.] Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: ov6650: Drop unused driver

2025-09-09T13:59:17+00:00

The ov6650 driver was introduced in v2.6.37 to support the OMAP1-based Amstrad Delta video phone. The platform still has a board file in the kernel, but support for the camera was dropped in commit ce548396a433 ("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies") in v5.9. The driver has been unused since as it has received neither ACPI nor DT support. The ov6650 driver is one of the last sensor drivers calling clk_set_rate(). This is deprecated, and calls to the function are being removed to avoid cargo-cult. As the driver is unlikely to ever be used again, drop it instead of trying to avoid call clk_set_rate(). Signed-off-by: Laurent Pinchart Signed-off-by: Sakari Ailus Reviewed-by: Mehdi Djait Signed-off-by: Hans Verkuil

media: i2c: add ov2735 image sensor driver

2025-09-09T13:59:17+00:00

Add a v4l2 subdevice driver for the Omnivision OV2735 sensor. The Omnivision OV2735 is a 1/2.7-Inch CMOS image sensor with an active array size of 1920 x 1080. The following features are supported: - Manual exposure an gain control support - vblank/hblank control support - Test pattern support control - Supported resolution: 1920 x 1080 @ 30fps (SGRBG10) Co-developed-by: Himanshu Bhavani Signed-off-by: Himanshu Bhavani Signed-off-by: Hardevsinh Palaniya [Sakari Ailus: Use container_of_const(), fix enum_bus_code condition.] Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: Add OmniVision OG0VE1B camera sensor

2025-09-09T13:59:16+00:00

OmniVision OG0VE1B is a monochrome image sensor, which produces frames in 8/10-bit raw output format and supports 640x480, 400x400, 200x200 and 100x100 output image resolution modes. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: Add OmniVision OV6211 image sensor driver

2025-09-09T13:59:16+00:00

OmniVision OV6211 is a monochrome image sensor, which produces frames in 8/10-bit raw output format and supports 400x400, 200x200 and 100x100 output image resolution modes. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: Move gc0310 sensor drivers to drivers/media/i2c/

2025-08-25T13:40:35+00:00

The atomisp gc0310 sensor driver has now been fully converted to a standard v4l2 sensor driver. Move it to drivers/media/i2c/ to reflect this. Signed-off-by: Hans de Goede Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: i2c: Add driver for ST VD55G1 camera sensor

2025-05-06T07:53:54+00:00

The VD55G1 is a monochrome global shutter camera with a 804x704 maximum resolution with RAW8 and RAW10 bytes per pixel. The driver supports : - Auto exposure from the sensor, or manual exposure mode - HDR subtraction mode, allowing edge detection and background removal - Auto exposure cold start, using configuration values from last stream to start the next one - LED GPIOs for illumination - Most standard camera sensor features (hblank, vblank, test patterns, again, dgain, hflip, vflip, auto exposure bias, etc.) Add driver source code to MAINTAINERS file. Signed-off-by: Benjamin Mugnier Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil