kernel/linux.git/drivers/media/common, branch v4.19.16

media: v4l2-tpg: array index could become negative

2019-01-09T16:38:47+00:00

commit e5f71a27fa12c1a1b02ad478a568e76260f1815e upstream. text[s] is a signed char, so using that as index into the font8x16 array can result in negative indices. Cast it to u8 to be safe. Signed-off-by: Hans Verkuil Reported-by: syzbot+ccf0a61ed12f2a7313ee@syzkaller.appspotmail.com Cc: # for v4.7 and up Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: vb2: check memory model for VIDIOC_CREATE_BUFS

2019-01-09T16:38:47+00:00

commit 62dcb4f41836bd3c44b5b651bb6df07ea4cb1551 upstream. vb2_core_create_bufs did not check if the memory model for newly added buffers is the same as for already existing buffers. It should return an error if they aren't the same. Signed-off-by: Hans Verkuil Reported-by: syzbot+e1fb118a2ebb88031d21@syzkaller.appspotmail.com Cc: # for v4.16 and up Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: vb2: don't call __vb2_queue_cancel if vb2_start_streaming failed

2018-12-19T18:19:52+00:00

commit 04990215dec43c424daff00d1f622167b8aafd1f upstream. vb2_start_streaming() already rolls back the buffers, so there is no need to call __vb2_queue_cancel(). Especially since __vb2_queue_cancel() does too much, such as zeroing the q->queued_count value, causing vb2 to think that no buffers have been queued. It appears that this call to __vb2_queue_cancel() is a left-over from before commit b3379c6201bb3. Fixes: b3379c6201bb3 ('vb2: only call start_streaming if sufficient buffers are queued') Signed-off-by: Hans Verkuil Cc: # for v4.16 and up Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: replace ADOBERGB by OPRGB

2018-11-13T19:08:54+00:00

commit db0340182444612bcadb98bdec22f651aa42266c upstream. The CTA-861 standards have been updated to refer to opRGB instead of AdobeRGB. The official standard is in fact named opRGB, so switch to that. The two old defines referring to ADOBERGB in the public API are put under #ifndef __KERNEL__ and a comment mentions that they are deprecated. Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org Acked-by: Daniel Vetter Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD

2018-11-13T19:08:52+00:00

commit 250854eed5d45a73d81e4137dfd85180af6f2ec3 upstream. When the OSD is on (i.e. vivid displays text on top of the test pattern), and you enable hflip, then the driver crashes. The cause turned out to be a division of a negative number by an unsigned value. You expect that -8 / 2U would be -4, but in reality it is 2147483644 :-( Fixes: 3e14e7a82c1ef ("vivid-tpg: add hor/vert downsampling support to tpg_gen_text") Signed-off-by: Hans Verkuil Reported-by: Mauro Carvalho Chehab Cc: # for v4.1 and up Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

Merge tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2018-08-16T01:29:14+00:00

Pull media updates from Mauro Carvalho Chehab: - new Socionext MN88443x ISDB-S/T demodulator driver: mn88443x - new sensor drivers: ak7375, ov2680 and rj54n1cb0c - an old soc-camera sensor driver converted to the V4L2 framework: mt9v111 - a new Voice-Coil Motor (VCM) driver: dw9807-vcm - some cleanups at cx25821, removing legacy unused code - some improvements at ddbridge driver - new platform driver: vicodec - some DVB API cleanups, removing ioctls and compat code for old out-of-tree drivers that were never merged upstream - improvements at DVB core to support frontents that support both Satellite and non-satellite delivery systems - got rid of the unused VIDIOC_RESERVED V4L2 ioctl - some cleanups/improvements at gl861 ISDB driver - several improvements on ov772x, ov7670 and ov5640, imx274, ov5645, and smiapp sensor drivers - fixes at em28xx to support dual TS devices - some cleanups at V4L2/VB2 locking logic - some API improvements at media controller - some cec core and drivers improvements - some uvcvideo improvements - some improvements at platform drivers: stm32-dcmi, rcar-vin, coda, reneseas-ceu, imx, vsp1, venus, camss - lots of other cleanups and fixes * tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (406 commits) Revert "media: vivid: shut up warnings due to a non-trivial logic" siano: get rid of an unused return code for debugfs register media: isp: fix a warning about a wrong struct initializer media: radio-wl1273: fix return code for the polling routine media: s3c-camif: fix return code for the polling routine media: saa7164: fix return codes for the polling routine media: exynos-gsc: fix return code if mutex was interrupted media: mt9v111: Fix build error with no VIDEO_V4L2_SUBDEV_API media: xc4000: get rid of uneeded casts media: drxj: get rid of uneeded casts media: tuner-xc2028: don't use casts for printing sizes media: cleanup fall-through comments media: vivid: shut up warnings due to a non-trivial logic media: rtl28xxu: be sure that it won't go past the array size media: mt9v111: avoid going past the buffer media: vsp1_dl: add a description for cmdpool field media: sta2x11: add a missing parameter description media: v4l2-mem2mem: add descriptions to MC fields media: i2c: fix warning in Aptina MT9V111 media: imx: shut up a false positive warning ...

siano: get rid of an unused return code for debugfs register

2018-08-08T14:57:14+00:00

The siano's debugfs register logic is optional: it should be ok if it fails. So, no need to check if debufs register succeeded. Signed-off-by: Mauro Carvalho Chehab

media: dvb: represent min/max/step/tolerance freqs in Hz

2018-08-02T22:10:48+00:00

Right now, satellite frontend drivers specify frequencies in kHz, while terrestrial/cable ones specify in Hz. That's confusing for developers. However, the main problem is that universal frontends capable of handling both satellite and non-satelite delivery systems are appearing. We end by needing to hack the drivers in order to support such hybrid frontends. So, convert everything to specify frontend frequencies in Hz. Tested-by: Katsuhiro Suzuki Signed-off-by: Mauro Carvalho Chehab

media: videobuf2-core: check for q->error in vb2_core_qbuf()

2018-07-24T21:51:39+00:00

The vb2_core_qbuf() function didn't check if q->error was set. It is checked in __buf_prepare(), but that function isn't called if the buffer was already prepared before with VIDIOC_PREPARE_BUF. So check it at the start of vb2_core_qbuf() as well. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

Merge tag 'drm-misc-next-2018-06-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2018-06-22T02:58:08+00:00

drm-misc-next for 4.19: UAPI Changes: - Add writeback connector (Brian Starkey/Liviu Dudau) - Add "content type" property to HDMI connectors (Stanislav Lisovskiy) Cross-subsystem Changes: - some devicetree Docs update - fix compile breakage on ION due to the dma-buf cleanups (Christian König) Core Changes: - Reject over-sized allocation requests early (Chris Wilson) - gem-fb-helper: Always do implicit sync (Daniel Vetter) - dma-buf cleanups (Christian König) Driver Changes: - Fixes for the otm8009a panel driver (Philippe Cornu) - Add Innolux TV123WAM panel driver support (Sandeep Panda) - Move GEM BO to drm_framebuffer in few drivers (Daniel Stone) - i915 pinning improvements (Chris Wilson) - Stop consulting plane->fb/crtc in a few drivers (Ville Syrjälä) Signed-off-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20180621105428.GA20795@juma