kernel/linux.git/drivers/md/raid5.c, branch v5.4.50

raid5: remove gfp flags from scribble_alloc()

2020-06-22T07:31:06+00:00

[ Upstream commit ba54d4d4d2844c234f1b4692bd8c9e0f833c8a54 ] Using GFP_NOIO flag to call scribble_alloc() from resize_chunk() does not have the expected behavior. kvmalloc_array() inside scribble_alloc() which receives the GFP_NOIO flag will eventually call kmalloc_node() to allocate physically continuous pages. Now we have memalloc scope APIs in mddev_suspend()/mddev_resume() to prevent memory reclaim I/Os during raid array suspend context, calling to kvmalloc_array() with GFP_KERNEL flag may avoid deadlock of recursive I/O as expected. This patch removes the useless gfp flags from parameters list of scribble_alloc(), and call kvmalloc_array() with GFP_KERNEL flag. The incorrect GFP_NOIO flag does not exist anymore. Fixes: b330e6a49dc3 ("md: convert to kvmalloc") Suggested-by: Michal Hocko Signed-off-by: Coly Li Signed-off-by: Song Liu Signed-off-by: Sasha Levin

raid5: need to set STRIPE_HANDLE for batch head

2020-01-09T09:19:48+00:00

[ Upstream commit a7ede3d16808b8f3915c8572d783530a82b2f027 ] With commit 6ce220dd2f8ea71d6afc29b9a7524c12e39f374a ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list"), we don't want to set STRIPE_HANDLE flag for sh which is already in batch list. However, the stripe which is the head of batch list should set this flag, otherwise panic could happen inside init_stripe at BUG_ON(sh->batch_head), it is reproducible with raid5 on top of nvdimm devices per Xiao oberserved. Thanks for Xiao's effort to verify the change. Fixes: 6ce220dd2f8ea ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list") Reported-by: Xiao Ni Tested-by: Xiao Ni Signed-off-by: Guoqing Jiang Signed-off-by: Song Liu Signed-off-by: Sasha Levin

md: improve handling of bio with REQ_PREFLUSH in md_flush_request()

2019-12-17T18:56:14+00:00

commit 775d78319f1ceb32be8eb3b1202ccdc60e9cb7f1 upstream. If pers->make_request fails in md_flush_request(), the bio is lost. To fix this, pass back a bool to indicate if the original make_request call should continue to handle the I/O and instead of assuming the flush logic will push it to completion. Convert md_flush_request to return a bool and no longer calls the raid driver's make_request function. If the return is true, then the md flush logic has or will complete the bio and the md make_request call is done. If false, then the md make_request function needs to keep processing like it is a normal bio. Let the original call to md_handle_request handle any need to retry sending the bio to the raid driver's make_request function should it be needed. Also mark md_flush_request and the make_request function pointer as __must_check to issue warnings should these critical return values be ignored. Fixes: 2bc13b83e629 ("md: batch flush requests.") Cc: stable@vger.kernel.org # # v4.19+ Cc: NeilBrown Signed-off-by: David Jeffery Reviewed-by: Xiao Ni Signed-off-by: Song Liu Signed-off-by: Greg Kroah-Hartman

raid5: remove STRIPE_OPS_REQ_PENDING

2019-09-13T20:14:39+00:00

This stripe state is not used anymore after commit 51acbcec6c42b24 ("md: remove CONFIG_MULTICORE_RAID456"), so remove the obsoleted state. gjiang@nb01257:~/md$ grep STRIPE_OPS_REQ_PENDING drivers/md/ -r drivers/md/raid5.c: (1 << STRIPE_OPS_REQ_PENDING) | drivers/md/raid5.h: STRIPE_OPS_REQ_PENDING, Signed-off-by: Guoqing Jiang Signed-off-by: Song Liu

raid5: don't set STRIPE_HANDLE to stripe which is in batch list

2019-09-13T20:10:05+00:00

If stripe in batch list is set with STRIPE_HANDLE flag, then the stripe could be set with STRIPE_ACTIVE by the handle_stripe function. And if error happens to the batch_head at the same time, break_stripe_batch_list is called, then below warning could happen (the same report in [1]), it means a member of batch list was set with STRIPE_ACTIVE. [7028915.431770] stripe state: 2001 [7028915.431815] ------------[ cut here ]------------ [7028915.431828] WARNING: CPU: 18 PID: 29089 at drivers/md/raid5.c:4614 break_stripe_batch_list+0x203/0x240 [raid456] [...] [7028915.431879] CPU: 18 PID: 29089 Comm: kworker/u82:5 Tainted: G O 4.14.86-1-storage #4.14.86-1.2~deb9 [7028915.431881] Hardware name: Supermicro SSG-2028R-ACR24L/X10DRH-iT, BIOS 3.1 06/18/2018 [7028915.431888] Workqueue: raid5wq raid5_do_work [raid456] [7028915.431890] task: ffff9ab0ef36d7c0 task.stack: ffffb72926f84000 [7028915.431896] RIP: 0010:break_stripe_batch_list+0x203/0x240 [raid456] [7028915.431898] RSP: 0018:ffffb72926f87ba8 EFLAGS: 00010286 [7028915.431900] RAX: 0000000000000012 RBX: ffff9aaa84a98000 RCX: 0000000000000000 [7028915.431901] RDX: 0000000000000000 RSI: ffff9ab2bfa15458 RDI: ffff9ab2bfa15458 [7028915.431902] RBP: ffff9aaa8fb4e900 R08: 0000000000000001 R09: 0000000000002eb4 [7028915.431903] R10: 00000000ffffffff R11: 0000000000000000 R12: ffff9ab1736f1b00 [7028915.431904] R13: 0000000000000000 R14: ffff9aaa8fb4e900 R15: 0000000000000001 [7028915.431906] FS: 0000000000000000(0000) GS:ffff9ab2bfa00000(0000) knlGS:0000000000000000 [7028915.431907] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [7028915.431908] CR2: 00007ff953b9f5d8 CR3: 0000000bf4009002 CR4: 00000000003606e0 [7028915.431909] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [7028915.431910] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [7028915.431910] Call Trace: [7028915.431923] handle_stripe+0x8e7/0x2020 [raid456] [7028915.431930] ? __wake_up_common_lock+0x89/0xc0 [7028915.431935] handle_active_stripes.isra.58+0x35f/0x560 [raid456] [7028915.431939] raid5_do_work+0xc6/0x1f0 [raid456] Also commit 59fc630b8b5f9f ("RAID5: batch adjacent full stripe write") said "If a stripe is added to batch list, then only the first stripe of the list should be put to handle_list and run handle_stripe." So don't set STRIPE_HANDLE to stripe which is already in batch list, otherwise the stripe could be put to handle_list and run handle_stripe, then the above warning could be triggered. [1]. https://www.spinics.net/lists/raid/msg62552.html Signed-off-by: Guoqing Jiang Signed-off-by: Song Liu

raid5: don't increment read_errors on EILSEQ return

2019-09-13T20:10:05+00:00

While MD continues to count read errors returned by the lower layer. If those errors are -EILSEQ, instead of -EIO, it should NOT increase the read_errors count. When RAID6 is set up on dm-integrity target that detects massive corruption, the leg will be ejected from the array. Even if the issue is correctable with a sector re-write and the array has necessary redundancy to correct it. The leg is ejected because it runs up the rdev->read_errors beyond conf->max_nr_stripes. The return status in dm-drypt when there is a data integrity error is -EILSEQ (BLK_STS_PROTECTION). Signed-off-by: Nigel Croxon Signed-off-by: Song Liu

md/raid5: use bio_end_sector to calculate last_sector

2019-09-03T21:52:38+00:00

Use the common way to get last_sector. Signed-off-by: Guoqing Jiang Signed-off-by: Song Liu

raid5 improve too many read errors msg by adding limits

2019-08-27T19:36:37+00:00

Often limits can be changed by admin. When discussing such things it helps if you can provide "self-sustained" facts. Also sometimes the admin thinks he changed a limit, but it did not take effect for some reason or he changed the wrong thing. V3: Only pr_warn when Faulty is 0. V2: Add read_errors value to pr_warn. Signed-off-by: Nigel Croxon Signed-off-by: Song Liu

md/raid6: Set R5_ReadError when there is read failure on parity disk

2019-08-07T17:25:02+00:00

7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in RAID6.") avoids rereading P when it can be computed from other members. However, this misses the chance to re-write the right data to P. This patch sets R5_ReadError if the re-read fails. Also, when re-read is skipped, we also missed the chance to reset rdev->read_errors to 0. It can fail the disk when there are many read errors on P member disk (other disks don't have read error) V2: upper layer read request don't read parity/Q data. So there is no need to consider such situation. This is Reported-by: kbuild test robot Fixes: 7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in RAID6.") Cc: #4.4+ Signed-off-by: Xiao Ni Signed-off-by: Song Liu

block: remove the bi_phys_segments field in struct bio

2019-06-20T16:29:22+00:00

We only need the number of segments in the blk-mq submission path. Remove the field from struct bio, and return it from a variant of blk_queue_split instead of that it can passed as an argument to those functions that need the value. This also means we stop recounting segments except for cloning and partial segments. To keep the number of arguments in this how path down remove pointless struct request_queue arguments from any of the functions that had it and grew a nr_segs argument. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe