kernel/linux.git/drivers/md/raid10.c, branch v6.18.43

md: merge mddev faillast_dev into mddev_flags

2026-07-24T14:16:32+00:00

[ Upstream commit 4f6d2e648cbe963b328cb8815290676da3866434 ] There is not need to use a separate field in struct mddev, there are no functional changes. Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-4-yukuai@fnnas.com Signed-off-by: Yu Kuai Reviewed-by: Li Nan Stable-dep-of: a286cb88ddb2 ("md/raid1: honor REQ_NOWAIT when waiting for behind writes") Signed-off-by: Sasha Levin

md/raid10: reset read_slot when reusing r10bio for discard

2026-07-24T14:15:57+00:00

[ Upstream commit 6b8a26af065ddc93de2aa5c9f0df98dce9723442 ] put_all_bios() always drops devs[i].bio, but it only drops devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an r10bio that was previously used for a read, read_slot can still be non-negative, and discard cleanup can skip bio_put() on repl_bio. Reset read_slot to -1 when preparing an r10bio for discard so the replacement bio is always released correctly. Fixes: d30588b2731f ("md/raid10: improve raid10 discard request") Signed-off-by: Chen Cheng Reviewed-by: Xiao Ni Link: https://patch.msgid.link/20260515093019.3436882-1-chencheng@fnnas.com Signed-off-by: Yu Kuai Signed-off-by: Sasha Levin

md/raid10: fix divide-by-zero in setup_geo() with zero far_copies

2026-05-14T13:30:20+00:00

commit 9aa6d860b0930e2f72795665c42c44252a558a0c upstream. setup_geo() extracts near_copies (nc) and far_copies (fc) from the user-provided layout parameter without checking for zero. When fc=0 with the "improved" far set layout selected, 'geo->far_set_size = disks / fc' triggers a divide-by-zero. Validate nc and fc immediately after extraction, returning -1 if either is zero. Fixes: 475901aff158 ("MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1)") Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo Link: https://lore.kernel.org/linux-raid/SYBPR01MB7881A5E2556806CC1D318582AF232@SYBPR01MB7881.ausprd01.prod.outlook.com Signed-off-by: Yu Kuai Signed-off-by: Greg Kroah-Hartman

md/raid10: fix deadlock with check operation and nowait requests

2026-05-07T04:11:39+00:00

commit 7d96f3120a7fb7210d21b520c5b6f495da6ba436 upstream. When an array check is running it will raise the barrier at which point normal requests will become blocked and increment the nr_pending value to signal there is work pending inside of wait_barrier(). NOWAIT requests do not block and so will return immediately with an error, and additionally do not increment nr_pending in wait_barrier(). Upstream change commit 43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added a call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit this condition. raid_end_bio_io() eventually calls allow_barrier() and it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even though the corresponding increment on nr_pending didn't happen in the NOWAIT case. This can be easily seen by starting a check operation while an application is doing nowait IO on the same array. This results in a deadlocked state due to nr_pending value underflowing and so the md resync thread gets stuck waiting for nr_pending to == 0. Output of r10conf state of the array when we hit this condition: crash> struct r10conf barrier = 1, nr_pending = { counter = -41 }, nr_waiting = 15, nr_queued = 0, Example of md_sync thread stuck waiting on raise_barrier() and other requests stuck in wait_barrier(): md1_resync [<0>] raise_barrier+0xce/0x1c0 [<0>] raid10_sync_request+0x1ca/0x1ed0 [<0>] md_do_sync+0x779/0x1110 [<0>] md_thread+0x90/0x160 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30 kworker/u1040:2+flush-253:4 [<0>] wait_barrier+0x1de/0x220 [<0>] regular_request_wait+0x30/0x180 [<0>] raid10_make_request+0x261/0x1000 [<0>] md_handle_request+0x13b/0x230 [<0>] __submit_bio+0x107/0x1f0 [<0>] submit_bio_noacct_nocheck+0x16f/0x390 [<0>] ext4_io_submit+0x24/0x40 [<0>] ext4_do_writepages+0x254/0xc80 [<0>] ext4_writepages+0x84/0x120 [<0>] do_writepages+0x7a/0x260 [<0>] __writeback_single_inode+0x3d/0x300 [<0>] writeback_sb_inodes+0x1dd/0x470 [<0>] __writeback_inodes_wb+0x4c/0xe0 [<0>] wb_writeback+0x18b/0x2d0 [<0>] wb_workfn+0x2a1/0x400 [<0>] process_one_work+0x149/0x330 [<0>] worker_thread+0x2d2/0x410 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30 Fixes: 43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") Cc: stable@vger.kernel.org Signed-off-by: Josh Hunt Link: https://lore.kernel.org/linux-raid/20260303005619.1352958-1-johunt@akamai.com Signed-off-by: Yu Kuai Signed-off-by: Greg Kroah-Hartman

md/raid10: fix any_working flag handling in raid10_sync_request

2026-02-26T22:59:00+00:00

[ Upstream commit 99582edb3f62e8ee6c34512021368f53f9b091f2 ] In raid10_sync_request(), 'any_working' indicates if any IO will be submitted. When there's only one In_sync disk with badblocks, 'any_working' might be set to 1 but no IO is submitted. Fix it by setting 'any_working' after badblock checks. Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-11-linan666@huaweicloud.com Fixes: e875ecea266a ("md/raid10 record bad blocks as needed during recovery.") Signed-off-by: Li Nan Reviewed-by: Yu Kuai Signed-off-by: Yu Kuai Signed-off-by: Sasha Levin

Merge tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

2025-10-02T17:16:56+00:00

Pull block updates from Jens Axboe: - NVMe pull request via Keith: - FC target fixes (Daniel) - Authentication fixes and updates (Martin, Chris) - Admin controller handling (Kamaljit) - Target lockdep assertions (Max) - Keep-alive updates for discovery (Alastair) - Suspend quirk (Georg) - MD pull request via Yu: - Add support for a lockless bitmap. A key feature for the new bitmap are that the IO fastpath is lockless. If a user issues lots of write IO to the same bitmap bit in a short time, only the first write has additional overhead to update bitmap bit, no additional overhead for the following writes. By supporting only resync or recover written data, means in the case creating new array or replacing with a new disk, there is no need to do a full disk resync/recovery. - Switch ->getgeo() and ->bios_param() to using struct gendisk rather than struct block_device. - Rust block changes via Andreas. This series adds configuration via configfs and remote completion to the rnull driver. The series also includes a set of changes to the rust block device driver API: a few cleanup patches, and a few features supporting the rnull changes. The series removes the raw buffer formatting logic from `kernel::block` and improves the logic available in `kernel::string` to support the same use as the removed logic. - floppy arch cleanups - Reduce the number of dereferencing needed for ublk commands - Restrict supported sockets for nbd. Mostly done to eliminate a class of issues perpetually reported by syzbot, by using nonsensical socket setups. - A few s390 dasd block fixes - Fix a few issues around atomic writes - Improve DMA interation for integrity requests - Improve how iovecs are treated with regards to O_DIRECT aligment constraints. We used to require each segment to adhere to the constraints, now only the request as a whole needs to. - Clean up and improve p2p support, enabling use of p2p for metadata payloads - Improve locking of request lookup, using SRCU where appropriate - Use page references properly for brd, avoiding very long RCU sections - Fix ordering of recursively submitted IOs - Clean up and improve updating nr_requests for a live device - Various fixes and cleanups * tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits) s390/dasd: enforce dma_alignment to ensure proper buffer validation s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request ublk: remove redundant zone op check in ublk_setup_iod() nvme: Use non zero KATO for persistent discovery connections nvmet: add safety check for subsys lock nvme-core: use nvme_is_io_ctrl() for I/O controller check nvme-core: do ioccsz/iorcsz validation only for I/O controllers nvme-core: add method to check for an I/O controller blk-cgroup: fix possible deadlock while configuring policy blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path blk-mq: Fix more tag iteration function documentation selftests: ublk: fix behavior when fio is not installed ublk: don't access ublk_queue in ublk_unmap_io() ublk: pass ublk_io to __ublk_complete_rq() ublk: don't access ublk_queue in ublk_need_complete_req() ublk: don't access ublk_queue in ublk_check_commit_and_fetch() ublk: don't pass ublk_queue to ublk_fetch() ublk: don't access ublk_queue in ublk_config_io_buf() ublk: don't access ublk_queue in ublk_check_fetch_buf() ublk: pass q_id and tag to __ublk_check_and_get_req() ...

md: init queue_limits->max_hw_wzeroes_unmap_sectors parameter

2025-09-16T16:37:12+00:00

The parameter max_hw_wzeroes_unmap_sectors in queue_limits should be equal to max_write_zeroes_sectors if it is set to a non-zero value. However, the stacked md drivers call md_init_stacking_limits() to initialize this parameter to UINT_MAX but only adjust max_write_zeroes_sectors when setting limits. Therefore, this discrepancy triggers a value check failure in blk_validate_limits(). $ modprobe scsi_debug num_parts=2 dev_size_mb=8 lbprz=1 lbpws=1 $ mdadm --create /dev/md0 --level=0 --raid-device=2 /dev/sda1 /dev/sda2 mdadm: Defaulting to version 1.2 metadata mdadm: RUN_ARRAY failed: Invalid argument Fix this failure by explicitly setting max_hw_wzeroes_unmap_sectors to max_write_zeroes_sectors. Since the linear and raid0 drivers support write zeroes, so they can support unmap write zeroes operation if all of the backend devices support it. However, the raid1/10/5 drivers don't support write zeroes, so we have to set it to zero. Fixes: 0c40d7cb5ef3 ("block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits") Reported-by: John Garry Closes: https://lore.kernel.org/linux-block/803a2183-a0bb-4b7a-92f1-afc5097630d2@oracle.com/ Signed-off-by: Zhang Yi Tested-by: John Garry Reviewed-by: Li Nan Reviewed-by: Martin K. Petersen Reviewed-by: Yu Kuai Reviewed-by: Hannes Reinecke Link: https://lore.kernel.org/linux-raid/20250910111107.3247530-2-yi.zhang@huaweicloud.com Signed-off-by: Yu Kuai

md/raid10: convert read/write to use bio_submit_split_bioset()

2025-09-10T11:23:45+00:00

Unify bio split code, prepare to fix ordering of split IO, the error path is modified a bit, however no functional changes are intended: - bio_submit_split_bioset() can fail the original bio directly by split error, set R10BIO_Uptodate in this case to notify raid_end_bio_io() that the original bio is returned already. - set R10BIO_Uptodate and set error value to -EIO is useless now, for r10_bio without R10BIO_Uptodate, -EIO will be returned for original bio. And discard is not handled, because discard is only split for unaligned head and tail, and this can be considered slow path, the reorder here does not matter much. Signed-off-by: Yu Kuai Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe

md/raid10: add a new r10bio flag R10BIO_Returned

2025-09-10T11:23:45+00:00

The new helper bio_submit_split_bioset() can failed the orginal bio on split errors, prepare to handle this case in raid_end_bio_io(). The flag name is refer to the r1bio flag name. Signed-off-by: Yu Kuai Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe

md: fix mssing blktrace bio split events

2025-09-10T11:23:45+00:00

If bio is split by internal handling like chunksize or badblocks, the corresponding trace_block_split() is missing, resulting in blktrace inability to catch BIO split events and making it harder to analyze the BIO sequence. Cc: stable@vger.kernel.org Fixes: 4b1faf931650 ("block: Kill bio_pair_split()") Signed-off-by: Yu Kuai Reviewed-by: Damien Le Moal Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe