kernel/linux.git/drivers/md/raid10.c, branch v6.1.2

md/raid0, raid10: Don't set discard sectors for request queue

2022-12-31T12:33:01+00:00

[ Upstream commit 8e1a2279ca2b0485cc379a153d02a9793f74a48f ] It should use disk_stack_limits to get a proper max_discard_sectors rather than setting a value by stack drivers. And there is a bug. If all member disks are rotational devices, raid0/raid10 set max_discard_sectors. So the member devices are not ssd/nvme, but raid0/raid10 export the wrong value. It reports warning messages in function __blkdev_issue_discard when mkfs.xfs like this: [ 4616.022599] ------------[ cut here ]------------ [ 4616.027779] WARNING: CPU: 4 PID: 99634 at block/blk-lib.c:50 __blkdev_issue_discard+0x16a/0x1a0 [ 4616.140663] RIP: 0010:__blkdev_issue_discard+0x16a/0x1a0 [ 4616.146601] Code: 24 4c 89 20 31 c0 e9 fe fe ff ff c1 e8 09 8d 48 ff 4c 89 f0 4c 09 e8 48 85 c1 0f 84 55 ff ff ff b8 ea ff ff ff e9 df fe ff ff <0f> 0b 48 8d 74 24 08 e8 ea d6 00 00 48 c7 c6 20 1e 89 ab 48 c7 c7 [ 4616.167567] RSP: 0018:ffffaab88cbffca8 EFLAGS: 00010246 [ 4616.173406] RAX: ffff9ba1f9e44678 RBX: 0000000000000000 RCX: ffff9ba1c9792080 [ 4616.181376] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ba1c9792080 [ 4616.189345] RBP: 0000000000000cc0 R08: ffffaab88cbffd10 R09: 0000000000000000 [ 4616.197317] R10: 0000000000000012 R11: 0000000000000000 R12: 0000000000000000 [ 4616.205288] R13: 0000000000400000 R14: 0000000000000cc0 R15: ffff9ba1c9792080 [ 4616.213259] FS: 00007f9a5534e980(0000) GS:ffff9ba1b7c80000(0000) knlGS:0000000000000000 [ 4616.222298] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4616.228719] CR2: 000055a390a4c518 CR3: 0000000123e40006 CR4: 00000000001706e0 [ 4616.236689] Call Trace: [ 4616.239428] blkdev_issue_discard+0x52/0xb0 [ 4616.244108] blkdev_common_ioctl+0x43c/0xa00 [ 4616.248883] blkdev_ioctl+0x116/0x280 [ 4616.252977] __x64_sys_ioctl+0x8a/0xc0 [ 4616.257163] do_syscall_64+0x5c/0x90 [ 4616.261164] ? handle_mm_fault+0xc5/0x2a0 [ 4616.265652] ? do_user_addr_fault+0x1d8/0x690 [ 4616.270527] ? do_syscall_64+0x69/0x90 [ 4616.274717] ? exc_page_fault+0x62/0x150 [ 4616.279097] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 4616.284748] RIP: 0033:0x7f9a55398c6b Signed-off-by: Xiao Ni Reported-by: Yi Zhang Reviewed-by: Ming Lei Signed-off-by: Song Liu Signed-off-by: Sasha Levin

Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux

2022-10-07T16:19:14+00:00

Pull block updates from Jens Axboe: - NVMe pull requests via Christoph: - handle number of queue changes in the TCP and RDMA drivers (Daniel Wagner) - allow changing the number of queues in nvmet (Daniel Wagner) - also consider host_iface when checking ip options (Daniel Wagner) - don't map pages which can't come from HIGHMEM (Fabio M. De Francesco) - avoid unnecessary flush bios in nvmet (Guixin Liu) - shrink and better pack the nvme_iod structure (Keith Busch) - add comment for unaligned "fake" nqn (Linjun Bao) - print actual source IP address through sysfs "address" attr (Martin Belanger) - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang) - handle effects after freeing the request (Keith Busch) - copy firmware_rev on each init (Keith Busch) - restrict management ioctls to admin (Keith Busch) - ensure subsystem reset is single threaded (Keith Busch) - report the actual number of tagset maps in nvme-pci (Keith Busch) - small fabrics authentication fixups (Christoph Hellwig) - add common code for tagset allocation and freeing (Christoph Hellwig) - stop using the request_queue in nvmet (Christoph Hellwig) - set min_align_mask before calculating max_hw_sectors (Rishabh Bhatnagar) - send a rediscover uevent when a persistent discovery controller reconnects (Sagi Grimberg) - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi) - MD pull request via Song: - Various raid5 fix and clean up, by Logan Gunthorpe and David Sloan. - Raid10 performance optimization, by Yu Kuai. - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu) - IO scheduler switching quisce fix (Keith) - s390/dasd block driver updates (Stefan) - support for recovery for the ublk driver (ZiyangZhang) - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph) - blk-mq and null_blk map fixes (Bart) - various bcache fixes (Coly, Jilin, Jules) - nbd signal hang fix (Shigeru) - block writeback throttling fix (Yu) - optimize the passthrough mapping handling (me) - prepare block cgroups to being gendisk based (Christoph) - get rid of an old PSI hack in the block layer, moving it to the callers instead where it belongs (Christoph) - blk-throttle fixes and cleanups (Yu) - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj, Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming, Miaohe, Bart, Coly, Gaosheng * tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits) sbitmap: fix lockup while swapping block: add rationale for not using blk_mq_plug() when applicable block: adapt blk_mq_plug() to not plug for writes that require a zone lock s390/dasd: use blk_mq_alloc_disk blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all blk-mq: use quiesced elevator switch when reinitializing queues block: replace blk_queue_nowait with bdev_nowait nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data ...

md/raid10: convert resync_lock to use seqlock

2022-09-22T07:05:05+00:00

Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier', and io can't be dispatched until 'barrier' is dropped. Since holding the 'barrier' is not common, convert 'resync_lock' to use seqlock so that holding lock can be avoided in fast path. Signed-off-by: Yu Kuai Reviewed-and-Tested-by: Logan Gunthorpe Signed-off-by: Song Liu

md/raid10: fix improper BUG_ON() in raise_barrier()

2022-09-22T07:05:05+00:00

'conf->barrier' is protected by 'conf->resync_lock', reading 'conf->barrier' without holding the lock is wrong. Signed-off-by: Yu Kuai Reviewed-by: Logan Gunthorpe Acked-by: Guoqing Jiang Signed-off-by: Song Liu

md/raid10: prevent unnecessary calls to wake_up() in fast path

2022-09-22T07:05:05+00:00

Currently, wake_up() is called unconditionally in fast path such as raid10_make_request(), which will cause lock contention under high concurrency: raid10_make_request wake_up __wake_up_common_lock spin_lock_irqsave Improve performance by only call wake_up() if waitqueue is not empty in allow_barrier() and raid10_make_request(). Signed-off-by: Yu Kuai Reviewed-by: Logan Gunthorpe Acked-by: Guoqing Jiang Signed-off-by: Song Liu

md/raid10: don't modify 'nr_waitng' in wait_barrier() for the case nowait

2022-09-22T07:05:05+00:00

For the case nowait in wait_barrier(), there is no point to increase nr_waiting and then decrease it. Signed-off-by: Yu Kuai Reviewed-by: Logan Gunthorpe Acked-by: Guoqing Jiang Signed-off-by: Song Liu

md/raid10: factor out code from wait_barrier() to stop_waiting_barrier()

2022-09-22T07:05:05+00:00

Currently the nasty condition in wait_barrier() is hard to read. This patch factors out the condition into a function. There are no functional changes. Signed-off-by: Yu Kuai Acked-by: Paul Menzel Reviewed-by: Logan Gunthorpe Acked-by: Guoqing Jiang Signed-off-by: Song Liu

md/raid10: fix compile warning

2022-09-22T07:05:03+00:00

With W=1, compiler complains. drivers/md/raid10.c:1983: warning: bad line: Signed-off-by: Guoqing Jiang Signed-off-by: Song Liu

md/raid10: Fix the data type of an r10_sync_page_io() argument

2022-08-24T17:26:35+00:00

Fix the following sparse warning: drivers/md/raid10.c:2647:60: sparse: sparse: incorrect type in argument 5 (different base types) @@ expected restricted blk_opf_t [usertype] opf @@ got int rw @@ This patch does not change any functionality since REQ_OP_READ = READ = 0 and since REQ_OP_WRITE = WRITE = 1. Cc: Rong A Chen Cc: Jens Axboe Cc: Paul Menzel Fixes: 4ce4c73f662b ("md/core: Combine two sync_page_io() arguments") Reported-by: kernel test robot Signed-off-by: Bart Van Assche Signed-off-by: Song Liu

md-raid10: fix KASAN warning

2022-08-02T23:22:46+00:00

There's a KASAN warning in raid10_remove_disk when running the lvm test lvconvert-raid-reshape.sh. We fix this warning by verifying that the value "number" is valid. BUG: KASAN: slab-out-of-bounds in raid10_remove_disk+0x61/0x2a0 [raid10] Read of size 8 at addr ffff889108f3d300 by task mdX_raid10/124682 CPU: 3 PID: 124682 Comm: mdX_raid10 Not tainted 5.19.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: dump_stack_lvl+0x34/0x44 print_report.cold+0x45/0x57a ? __lock_text_start+0x18/0x18 ? raid10_remove_disk+0x61/0x2a0 [raid10] kasan_report+0xa8/0xe0 ? raid10_remove_disk+0x61/0x2a0 [raid10] raid10_remove_disk+0x61/0x2a0 [raid10] Buffer I/O error on dev dm-76, logical block 15344, async page read ? __mutex_unlock_slowpath.constprop.0+0x1e0/0x1e0 remove_and_add_spares+0x367/0x8a0 [md_mod] ? super_written+0x1c0/0x1c0 [md_mod] ? mutex_trylock+0xac/0x120 ? _raw_spin_lock+0x72/0xc0 ? _raw_spin_lock_bh+0xc0/0xc0 md_check_recovery+0x848/0x960 [md_mod] raid10d+0xcf/0x3360 [raid10] ? sched_clock_cpu+0x185/0x1a0 ? rb_erase+0x4d4/0x620 ? var_wake_function+0xe0/0xe0 ? psi_group_change+0x411/0x500 ? preempt_count_sub+0xf/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? raid10_sync_request+0x36c0/0x36c0 [raid10] ? preempt_count_sub+0xf/0xc0 ? _raw_spin_unlock_irqrestore+0x19/0x40 ? del_timer_sync+0xa9/0x100 ? try_to_del_timer_sync+0xc0/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? _raw_spin_unlock_irq+0x11/0x24 ? __list_del_entry_valid+0x68/0xa0 ? finish_wait+0xa3/0x100 md_thread+0x161/0x260 [md_mod] ? unregister_md_personality+0xa0/0xa0 [md_mod] ? _raw_spin_lock_irqsave+0x78/0xc0 ? prepare_to_wait_event+0x2c0/0x2c0 ? unregister_md_personality+0xa0/0xa0 [md_mod] kthread+0x148/0x180 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 Allocated by task 124495: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x80/0xa0 setup_conf+0x140/0x5c0 [raid10] raid10_run+0x4cd/0x740 [raid10] md_run+0x6f9/0x1300 [md_mod] raid_ctr+0x2531/0x4ac0 [dm_raid] dm_table_add_target+0x2b0/0x620 [dm_mod] table_load+0x1c8/0x400 [dm_mod] ctl_ioctl+0x29e/0x560 [dm_mod] dm_compat_ctl_ioctl+0x7/0x20 [dm_mod] __do_compat_sys_ioctl+0xfa/0x160 do_syscall_64+0x90/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 L __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff889108f3d200 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of 256-byte region [ffff889108f3d200, ffff889108f3d300) The buggy address belongs to the physical page: page:000000007ef2a34c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1108f3c head:000000007ef2a34c order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=2) raw: 4000000000010200 0000000000000000 dead000000000001 ffff889100042b40 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff889108f3d200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff889108f3d280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff889108f3d300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff889108f3d380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff889108f3d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Song Liu Signed-off-by: Jens Axboe