kernel/linux.git/drivers/md/md.h, branch v5.15.208

md: add error_handlers for raid0 and linear

2023-09-19T10:22:39+00:00

[ Upstream commit c31fea2f8e2a72c817f318016bbc327095175a9f ] After the commit 9631abdbf406c("md: Set MD_BROKEN for RAID1 and RAID10") MD_BROKEN must be set if array is failed because state_store() checks it. If it is set then -EBUSY is returned to userspace. For raid0 and linear MD_BROKEN is not set by error_handler(). As a result mdadm is unable to trigger clean-up actions. It is a regression. This patch adds appropriate error_handler for raid0 and linear. The error handler sets MD_BROKEN for this device. Reviewed-by: Xiao Ni Signed-off-by: Mariusz Tkaczyk Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20230306130317.3418-1-mariusz.tkaczyk@linux.intel.com Stable-dep-of: 319ff40a5427 ("md/raid0: Fix performance regression for large sequential writes") Signed-off-by: Sasha Levin

md: Set MD_BROKEN for RAID1 and RAID10

2023-09-19T10:22:39+00:00

[ Upstream commit 9631abdbf406c764f2a5d8305eac063bc3396a0a ] There is no direct mechanism to determine raid failure outside personality. It is done by checking rdev->flags after executing md_error(). If "faulty" flag is not set then -EBUSY is returned to userspace. -EBUSY means that array will be failed after drive removal. Mdadm has special routine to handle the array failure and it is executed if -EBUSY is returned by md. There are at least two known reasons to not consider this mechanism as correct: 1. drive can be removed even if array will be failed[1]. 2. -EBUSY seems to be wrong status. Array is not busy, but removal process cannot proceed safe. -EBUSY expectation cannot be removed without breaking compatibility with userspace. In this patch first issue is resolved by adding support for MD_BROKEN flag for RAID1 and RAID10. Support for RAID456 is added in next commit. The idea is to set the MD_BROKEN if we are sure that raid is in failed state now. This is done in each error_handler(). In md_error() MD_BROKEN flag is checked. If is set, then -EBUSY is returned to userspace. As in previous commit, it causes that #mdadm --set-faulty is able to fail array. Previously proposed workaround is valid if optional functionality[1] is disabled. [1] commit 9a567843f7ce("md: allow last device to be forcibly removed from RAID1/RAID10.") Reviewd-by: Xiao Ni Signed-off-by: Mariusz Tkaczyk Signed-off-by: Song Liu Stable-dep-of: 319ff40a5427 ("md/raid0: Fix performance regression for large sequential writes") Signed-off-by: Sasha Levin

md: Move alloc/free acct bioset in to personality

2022-01-27T10:05:08+00:00

commit 0c031fd37f69deb0cd8c43bbfcfccd62ebd7e952 upstream. bioset acct is only needed for raid0 and raid5. Therefore, md_run only allocates it for raid0 and raid5. However, this does not cover personality takeover, which may cause uninitialized bioset. For example, the following repro steps: mdadm -CR /dev/md0 -l1 -n2 /dev/loop0 /dev/loop1 mdadm --wait /dev/md0 mkfs.xfs /dev/md0 mdadm /dev/md0 --grow -l5 mount /dev/md0 /mnt causes panic like: [ 225.933939] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 225.934903] #PF: supervisor instruction fetch in kernel mode [ 225.935639] #PF: error_code(0x0010) - not-present page [ 225.936361] PGD 0 P4D 0 [ 225.936677] Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI [ 225.937525] CPU: 27 PID: 1133 Comm: mount Not tainted 5.16.0-rc3+ #706 [ 225.938416] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.module_el8.4.0+547+a85d02ba 04/01/2014 [ 225.939922] RIP: 0010:0x0 [ 225.940289] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 225.941196] RSP: 0018:ffff88815897eff0 EFLAGS: 00010246 [ 225.941897] RAX: 0000000000000000 RBX: 0000000000092800 RCX: ffffffff81370a39 [ 225.942813] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000092800 [ 225.943772] RBP: 1ffff1102b12fe04 R08: fffffbfff0b43c01 R09: fffffbfff0b43c01 [ 225.944807] R10: ffffffff85a1e007 R11: fffffbfff0b43c00 R12: ffff88810eaaaf58 [ 225.945757] R13: 0000000000000000 R14: ffff88810eaaafb8 R15: ffff88815897f040 [ 225.946709] FS: 00007ff3f2505080(0000) GS:ffff888fb5e00000(0000) knlGS:0000000000000000 [ 225.947814] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 225.948556] CR2: ffffffffffffffd6 CR3: 000000015aa5a006 CR4: 0000000000370ee0 [ 225.949537] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 225.950455] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 225.951414] Call Trace: [ 225.951787] [ 225.952120] mempool_alloc+0xe5/0x250 [ 225.952625] ? mempool_resize+0x370/0x370 [ 225.953187] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 225.953862] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 225.954464] ? sched_clock_cpu+0x15/0x120 [ 225.955019] ? find_held_lock+0xac/0xd0 [ 225.955564] bio_alloc_bioset+0x1ed/0x2a0 [ 225.956080] ? lock_downgrade+0x3a0/0x3a0 [ 225.956644] ? bvec_alloc+0xc0/0xc0 [ 225.957135] bio_clone_fast+0x19/0x80 [ 225.957651] raid5_make_request+0x1370/0x1b70 [ 225.958286] ? sched_clock_cpu+0x15/0x120 [ 225.958797] ? __lock_acquire+0x8b2/0x3510 [ 225.959339] ? raid5_get_active_stripe+0xce0/0xce0 [ 225.959986] ? lock_is_held_type+0xd8/0x130 [ 225.960528] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 225.961135] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 225.961703] ? sched_clock_cpu+0x15/0x120 [ 225.962232] ? lock_release+0x27a/0x6c0 [ 225.962746] ? do_wait_intr_irq+0x130/0x130 [ 225.963302] ? lock_downgrade+0x3a0/0x3a0 [ 225.963815] ? lock_release+0x6c0/0x6c0 [ 225.964348] md_handle_request+0x342/0x530 [ 225.964888] ? set_in_sync+0x170/0x170 [ 225.965397] ? blk_queue_split+0x133/0x150 [ 225.965988] ? __blk_queue_split+0x8b0/0x8b0 [ 225.966524] ? submit_bio_checks+0x3b2/0x9d0 [ 225.967069] md_submit_bio+0x127/0x1c0 [...] Fix this by moving alloc/free of acct bioset to pers->run and pers->free. While we are on this, properly handle md_integrity_register() error in raid0_run(). Fixes: daee2024715d (md: check level before create and exit io_acct_set) Cc: stable@vger.kernel.org Acked-by: Guoqing Jiang Signed-off-by: Xiao Ni Signed-off-by: Song Liu Signed-off-by: Greg Kroah-Hartman

block: remove GENHD_FL_UP

2021-08-12T16:29:36+00:00

Just check inode_unhashed on the whole device bdev inode instead, and provide a helper to check for that information. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20210809064028.1198327-9-hch@lst.de Signed-off-by: Jens Axboe

Merge tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block

2021-06-30T19:21:16+00:00

Pull block driver updates from Jens Axboe: "Pretty calm round, mostly just NVMe and a bit of MD: - NVMe updates (via Christoph) - improve the APST configuration algorithm (Alexey Bogoslavsky) - look for StorageD3Enable on companion ACPI device (Mario Limonciello) - allow selecting the network interface for TCP connections (Martin Belanger) - misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King, Christoph) - move the ACPI StorageD3 code to drivers/acpi/ and add quirks for certain AMD CPUs (Mario Limonciello) - zoned device support for nvmet (Chaitanya Kulkarni) - fix the rules for changing the serial number in nvmet (Noam Gottlieb) - various small fixes and cleanups (Dan Carpenter, JK Kim, Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert Uytterhoeven, Daniel Wagner) - MD updates (Via Song) - iostats rewrite (Guoqing Jiang) - raid5 lock contention optimization (Gal Ofri) - Fall through warning fix (Gustavo) - Misc fixes (Gustavo, Jiapeng)" * tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits) nvmet: use NVMET_MAX_NAMESPACES to set nn value loop: Fix missing discard support when using LOOP_CONFIGURE nvme.h: add missing nvme_lba_range_type endianness annotations nvme: remove zeroout memset call for struct nvme-pci: remove zeroout memset call for struct nvmet: remove zeroout memset call for struct nvmet: add ZBD over ZNS backend support nvmet: add Command Set Identifier support nvmet: add nvmet_req_bio put helper for backends nvmet: add req cns error complete helper block: export blk_next_bio() nvmet: remove local variable nvmet: use nvme status value directly nvmet: use u32 type for the local variable nsid nvmet: use u32 for nvmet_subsys max_nsid nvmet: use req->cmd directly in file-ns fast path nvmet: use req->cmd directly in bdev-ns fast path nvmet: make ver stable once connection established nvmet: allow mn change if subsys not discovered nvmet: make sn stable once connection was established ...

md: Constify attribute_group structs

2021-06-15T05:32:07+00:00

The attribute_group structs are never modified, they're only passed to sysfs_create_group() and sysfs_remove_group(). Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn Signed-off-by: Song Liu

md: add io accounting for raid0 and raid5

2021-06-15T05:32:06+00:00

We introduce a new bioset (io_acct_set) for raid0 and raid5 since they don't own clone infrastructure to accounting io. And the bioset is added to mddev instead of to raid0 and raid5 layer, because with this way, we can put common functions to md.h and reuse them in raid0 and raid5. Also struct md_io_acct is added accordingly which includes io start_time, the origin bio and cloned bio. Then we can call bio_{start,end}_io_acct to get related io status. Signed-off-by: Guoqing Jiang Signed-off-by: Song Liu

md: revert io stats accounting

2021-06-15T05:32:06+00:00

The commit 41d2d848e5c0 ("md: improve io stats accounting") could cause double fault problem per the report [1], and also it is not correct to change ->bi_end_io if md don't own it, so let's revert it. And io stats accounting will be replemented in later commits. [1]. https://lore.kernel.org/linux-raid/3bf04253-3fad-434a-63a7-20214e38cf26@gmail.com/T/#t Fixes: 41d2d848e5c0 ("md: improve io stats accounting") Signed-off-by: Guoqing Jiang Signed-off-by: Song Liu

block: move bd_mutex to struct gendisk

2021-06-01T13:44:32+00:00

Replace the per-block device bd_mutex with a per-gendisk open_mutex, thus simplifying locking wherever we deal with partitions. Signed-off-by: Christoph Hellwig Reviewed-by: Ming Lei Acked-by: Roger Pau Monné Link: https://lore.kernel.org/r/20210525061301.2242282-4-hch@lst.de Signed-off-by: Jens Axboe

md: add md_submit_discard_bio() for submitting discard bio

2021-03-24T23:29:06+00:00

Move these logic from raid0.c to md.c, so that we can also use it in raid10.c. Reviewed-by: Coly Li Reviewed-by: Guoqing Jiang Tested-by: Adrian Huang Signed-off-by: Xiao Ni Signed-off-by: Song Liu