kernel/linux.git/drivers/md/dm.h, branch linux-5.15.y

dm: send just one event on resize, not two

2023-03-10T08:40:05+00:00

commit 7533afa1d27ba1234146d31d2402c195cf195962 upstream. Device mapper sends an uevent when the device is suspended, using the function set_capacity_and_notify. However, this causes a race condition with udev. Udev skips scanning dm devices that are suspended. If we send an uevent while we are suspended, udev will be racing with device mapper resume code. If the device mapper resume code wins the race, udev will process the uevent after the device is resumed and it will properly scan the device. However, if udev wins the race, it will receive the uevent, find out that the dm device is suspended and skip scanning the device. This causes bugs such as systemd unmounting the device - see https://bugzilla.redhat.com/show_bug.cgi?id=2158628 This commit fixes this race. We replace the function set_capacity_and_notify with set_capacity, so that the uevent is not sent at this point. In do_resume, we detect if the capacity has changed and we pass a boolean variable need_resize_uevent to dm_kobject_uevent. dm_kobject_uevent adds "RESIZE=1" to the uevent if need_resize_uevent is set. Signed-off-by: Mikulas Patocka Tested-by: Peter Rajnoha Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

dm: introduce zone append emulation

2021-06-04T16:07:37+00:00

For zoned targets that cannot support zone append operations, implement an emulation using regular write operations. If the original BIO submitted by the user is a zone append operation, change its clone into a regular write operation directed at the target zone write pointer position. To do so, an array of write pointer offsets (write pointer position relative to the start of a zone) is added to struct mapped_device. All operations that modify a sequential zone write pointer (writes, zone reset, zone finish and zone append) are intersepted in __map_bio() and processed using the new functions dm_zone_map_bio(). Detection of the target ability to natively support zone append operations is done from dm_table_set_restrictions() by calling the function dm_set_zones_restrictions(). A target that does not support zone append operation, either by explicitly declaring it using the new struct dm_target field zone_append_not_supported, or because the device table contains a non-zoned device, has its mapped device marked with the new flag DMF_ZONE_APPEND_EMULATED. The helper function dm_emulate_zone_append() is introduced to test a mapped device for this new flag. Atomicity of the zones write pointer tracking and updates is done using a zone write locking mechanism based on a bitmap. This is similar to the block layer method but based on BIOs rather than struct request. A zone write lock is taken in dm_zone_map_bio() for any clone BIO with an operation type that changes the BIO target zone write pointer position. The zone write lock is released if the clone BIO is failed before submission or when dm_zone_endio() is called when the clone BIO completes. The zone write lock bitmap of the mapped device, together with a bitmap indicating zone types (conv_zones_bitmap) and the write pointer offset array (zwp_offset) are allocated and initialized with a full device zone report in dm_set_zones_restrictions() using the function dm_revalidate_zones(). For failed operations that may have modified a zone write pointer, the zone write pointer offset is marked as invalid in dm_zone_endio(). Zones with an invalid write pointer offset are checked and the write pointer updated using an internal report zone operation when the faulty zone is accessed again by the user. All functions added for this emulation have a minimal overhead for zoned targets natively supporting zone append operations. Regular device targets are also not affected. The added code also does not impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all dm zone related functions. Signed-off-by: Damien Le Moal Reviewed-by: Himanshu Madhani Reviewed-by: Hannes Reinecke Signed-off-by: Mike Snitzer

dm: Forbid requeue of writes to zones

2021-06-04T16:07:33+00:00

A target map method requesting the requeue of a bio with DM_MAPIO_REQUEUE or completing it with DM_ENDIO_REQUEUE can cause unaligned write errors if the bio is a write operation targeting a sequential zone. If a zoned target request such a requeue, warn about it and kill the IO. The function dm_is_zone_write() is introduced to detect write operations to zoned targets. This change does not affect the target drivers supporting zoned devices and exposing a zoned device, namely dm-crypt, dm-linear and dm-flakey as none of these targets ever request a requeue. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Himanshu Madhani Signed-off-by: Mike Snitzer

dm: move zone related code to dm-zone.c

2021-06-04T16:07:31+00:00

Move core and table code used for zoned targets and conditionally defined with #ifdef CONFIG_BLK_DEV_ZONED to the new file dm-zone.c. This file is conditionally compiled depending on CONFIG_BLK_DEV_ZONED. The small helper dm_set_zones_restrictions() is introduced to initialize a mapped device request queue zone attributes in dm_table_set_restrictions(). Signed-off-by: Damien Le Moal Reviewed-by: Johannes Thumshirn Reviewed-by: Hannes Reinecke Reviewed-by: Himanshu Madhani Signed-off-by: Mike Snitzer

dm table: fix DAX iterate_devices based device capability checks

2021-02-09T13:45:30+00:00

Fix dm_table_supports_dax() and invert logic of both iterate_devices_callout_fn so that all devices' DAX capabilities are properly checked. Fixes: 545ed20e6df6 ("dm: add infrastructure for DAX support") Cc: stable@vger.kernel.org Signed-off-by: Jeffle Xu Signed-off-by: Mike Snitzer

dm table: make 'struct dm_table' definition accessible to all of DM core

2020-09-29T20:33:07+00:00

Move 'struct dm_table' definition from dm-table.c to dm-core.h and update DM core to access its members directly. Helps optimize max_io_len() and other methods slightly. Signed-off-by: Mike Snitzer

writeback: remove bdi->congested_fn

2020-07-08T23:20:46+00:00

Except for pktdvd, the only places setting congested bits are file systems that allocate their own backing_dev_info structures. And pktdvd is a deprecated driver that isn't useful in stack setup either. So remove the dead congested_fn stacking infrastructure. Signed-off-by: Christoph Hellwig Acked-by: Song Liu Acked-by: David Sterba [axboe: fixup unused variables in bcache/request.c] Signed-off-by: Jens Axboe

dm: make dm_table_find_target return NULL

2019-08-23T14:13:12+00:00

Currently, if we pass too high sector number to dm_table_find_target, it returns zeroed dm_target structure and callers test if the structure is zeroed with the macro dm_target_is_valid. However, returning NULL is common practice to indicate errors. This patch refactors the dm code, so that dm_table_find_target returns NULL and its callers test the returned value for NULL. The macro dm_target_is_valid is deleted. In alloc_targets, we no longer allocate an extra zeroed target. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer

dm: enable synchronous dax

2019-07-05T22:19:10+00:00

This patch sets dax device 'DAXDEV_SYNC' flag if all the target devices of device mapper support synchrononous DAX. If device mapper consists of both synchronous and asynchronous dax devices, we don't set 'DAXDEV_SYNC' flag. 'dm_table_supports_dax' is refactored to pass 'iterate_devices_fn' as argument so that the callers can pass the appropriate functions. Suggested-by: Mike Snitzer Signed-off-by: Pankaj Gupta Reviewed-by: Mike Snitzer Signed-off-by: Dan Williams

dax: Arrange for dax_supported check to span multiple devices

2019-05-20T22:02:08+00:00

Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: Cc: Ira Weiny Cc: Dave Jiang Cc: Keith Busch Cc: Matthew Wilcox Cc: Vishal Verma Cc: Heiko Carstens Cc: Martin Schwidefsky Reviewed-by: Jan Kara Reported-by: Pankaj Gupta Reviewed-by: Pankaj Gupta Tested-by: Pankaj Gupta Tested-by: Vaibhav Jain Reviewed-by: Mike Snitzer Signed-off-by: Dan Williams