kernel/linux.git/drivers/md/dm.c, branch v4.19.16

dm: call blk_queue_split() to impose device limits on bios

2018-12-19T18:19:52+00:00

commit 89f5fa47476eda56402e29fff3c5097f5c2a1e19 upstream. Otherwise the incoming bios, of various types, won't be shaped based on the DM device's advertised limits. Depends-on: af67c31fba ("blk: remove bio_set arg from blk_queue_split()") Fixes: 744889b7cb ("block: don't deal with discard limit in blkdev_issue_discard()") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

dm: fix report zone remapping to account for partition offset

2018-10-09T18:20:13+00:00

If dm-linear or dm-flakey are layered on top of a partition of a zoned block device, remapping of the start sector and write pointer position of the zones reported by a report zones BIO must be modified to account for the target table entry mapping (start offset within the device and entry mapping with the dm device). If the target's backing device is a partition of a whole disk, the start sector on the physical device of the partition must also be accounted for when modifying the zone information. However, dm_remap_zone_report() was not considering this last case, resulting in incorrect zone information remapping with targets using disk partitions. Fix this by calculating the target backing device start sector using the position of the completed report zones BIO and the unchanged position and size of the original report zone BIO. With this value calculated, the start sector and write pointer position of the target zones can be correctly remapped. Fixes: 10999307c14e ("dm: introduce dm_remap_zone_report()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Mike Snitzer

block: Add and use op_stat_group() for indexing disk_stat fields.

2018-07-18T14:44:20+00:00

Add and use a new op_stat_group() function for indexing partition stat fields rather than indexing them by rq_data_dir() or bio_data_dir(). This function works similarly to op_is_sync() in that it takes the request::cmd_flags or bio::bi_opf flags and determines which stats should et updated. In addition, the second parameter to generic_start_io_acct() and generic_end_io_acct() is now a REQ_OP rather than simply a read or write bit and it uses op_stat_group() on the parameter to determine the stat group. Note that the partition in_flight counts are not part of the per-cpu statistics and as such are not indexed via this function. It's now indexed by op_is_write(). tj: Refreshed on top of v4.17. Updated to pass around REQ_OP. Signed-off-by: Michael Callahan Signed-off-by: Tejun Heo Cc: Minchan Kim Cc: Dan Williams Cc: Joshua Morris Cc: Philipp Reisner Cc: Matias Bjorling Cc: Kent Overstreet Cc: Alasdair Kergon Signed-off-by: Jens Axboe

dm: prevent DAX mounts if not supported

2018-06-28T20:06:14+00:00

Currently device_supports_dax() just checks to see if the QUEUE_FLAG_DAX flag is set on the device's request queue to decide whether or not the device supports filesystem DAX. Really we should be using bdev_dax_supported() like filesystems do at mount time. This performs other tests like checking to make sure the dax_direct_access() path works. We also explicitly clear QUEUE_FLAG_DAX on the DM device's request queue if any of the underlying devices do not support DAX. This makes the handling of QUEUE_FLAG_DAX consistent with the setting/clearing of most other flags in dm_table_set_restrictions(). Now that bdev_dax_supported() explicitly checks for QUEUE_FLAG_DAX, this will ensure that filesystems built upon DM devices will only be able to mount with DAX if all underlying devices also support DAX. Signed-off-by: Ross Zwisler Fixes: commit 545ed20e6df6 ("dm: add infrastructure for DAX support") Cc: stable@vger.kernel.org Acked-by: Dan Williams Reviewed-by: Toshi Kani Signed-off-by: Mike Snitzer

dm: use bio_split() when splitting out the already processed bio

2018-06-22T18:51:11+00:00

Use of bio_clone_bioset() is inefficient if there is no need to clone the original bio's bio_vec array. Best to use the bio_clone_fast() variant. Also, just using bio_advance() is only part of what is needed to properly setup the clone -- it doesn't account for the various bio_integrity() related work that also needs to be performed (see bio_split). Address both of these issues by switching from bio_clone_bioset() to bio_split(). Fixes: 18a25da8 ("dm: ensure bio submission follows a depth-first tree walk") Cc: stable@vger.kernel.org # 4.15+, requires removal of '&' before md->queue->bio_split Reported-by: Christoph Hellwig Reviewed-by: NeilBrown Signed-off-by: Mike Snitzer

Merge tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

2018-06-09T00:21:52+00:00

Pull libnvdimm updates from Dan Williams: "This adds a user for the new 'bytes-remaining' updates to memcpy_mcsafe() that you already received through Ingo via the x86-dax- for-linus pull. Not included here, but still targeting this cycle, is support for handling memory media errors (poison) consumed via userspace dax mappings. Summary: - DAX broke a fundamental assumption of truncate of file mapped pages. The truncate path assumed that it is safe to disconnect a pinned page from a file and let the filesystem reclaim the physical block. With DAX the page is equivalent to the filesystem block. Introduce dax_layout_busy_page() to enable filesystems to wait for pinned DAX pages to be released. Without this wait a filesystem could allocate blocks under active device-DMA to a new file. - DAX arranges for the block layer to be bypassed and uses dax_direct_access() + copy_to_iter() to satisfy read(2) calls. However, the memcpy_mcsafe() facility is available through the pmem block driver. In order to safely handle media errors, via the DAX block-layer bypass, introduce copy_to_iter_mcsafe(). - Fix cache management policy relative to the ACPI NFIT Platform Capabilities Structure to properly elide cache flushes when they are not necessary. The table indicates whether CPU caches are power-fail protected. Clarify that a deep flush is always performed on REQ_{FUA,PREFLUSH} requests" * tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) dax: Use dax_write_cache* helpers libnvdimm, pmem: Do not flush power-fail protected CPU caches libnvdimm, pmem: Unconditionally deep flush on *sync libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH acpi, nfit: Remove ecc_unit_size dax: dax_insert_mapping_entry always succeeds libnvdimm, e820: Register all pmem resources libnvdimm: Debug probe times linvdimm, pmem: Preserve read-only setting for pmem devices x86, nfit_test: Add unit test for memcpy_mcsafe() pmem: Switch to copy_to_iter_mcsafe() dax: Report bytes remaining in dax_iomap_actor() dax: Introduce a ->copy_to_iter dax operation uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation xfs, dax: introduce xfs_break_dax_layouts() xfs: prepare xfs_break_layouts() for another layout type xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL mm, fs, dax: handle layout changes to pinned dax mappings mm: fix __gup_device_huge vs unmap mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS ...

dm: use bioset_init_from_src() to copy bio_set

2018-06-08T13:06:29+00:00

We can't just copy and clear a bio_set, use the bio helper to setup a new bio_set with the settings from another one. Fixes: 6f1c819c219f ("dm: convert to bioset_init()/mempool_init()") Reported-by: Venkat R.B Tested-by: Venkat R.B Tested-by: Li Wang Reviewed-by: Mike Snitzer Signed-off-by: Jens Axboe

Merge tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block

2018-06-04T14:58:06+00:00

Pull block updates from Jens Axboe: - clean up how we pass around gfp_t and blk_mq_req_flags_t (Christoph) - prepare us to defer scheduler attach (Christoph) - clean up drivers handling of bounce buffers (Christoph) - fix timeout handling corner cases (Christoph/Bart/Keith) - bcache fixes (Coly) - prep work for bcachefs and some block layer optimizations (Kent). - convert users of bio_sets to using embedded structs (Kent). - fixes for the BFQ io scheduler (Paolo/Davide/Filippo) - lightnvm fixes and improvements (Matias, with contributions from Hans and Javier) - adding discard throttling to blk-wbt (me) - sbitmap blk-mq-tag handling (me/Omar/Ming). - remove the sparc jsflash block driver, acked by DaveM. - Kyber scheduler improvement from Jianchao, making it more friendly wrt merging. - conversion of symbolic proc permissions to octal, from Joe Perches. Previously the block parts were a mix of both. - nbd fixes (Josef and Kevin Vigor) - unify how we handle the various kinds of timestamps that the block core and utility code uses (Omar) - three NVMe pull requests from Keith and Christoph, bringing AEN to feature completeness, file backed namespaces, cq/sq lock split, and various fixes - various little fixes and improvements all over the map * tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block: (196 commits) blk-mq: update nr_requests when switching to 'none' scheduler block: don't use blocking queue entered for recursive bio submits dm-crypt: fix warning in shutdown path lightnvm: pblk: take bitmap alloc. out of critical section lightnvm: pblk: kick writer on new flush points lightnvm: pblk: only try to recover lines with written smeta lightnvm: pblk: remove unnecessary bio_get/put lightnvm: pblk: add possibility to set write buffer size manually lightnvm: fix partial read error path lightnvm: proper error handling for pblk_bio_add_pages lightnvm: pblk: fix smeta write error path lightnvm: pblk: garbage collect lines with failed writes lightnvm: pblk: rework write error recovery path lightnvm: pblk: remove dead function lightnvm: pass flag on graceful teardown to targets lightnvm: pblk: check for chunk size before allocating it lightnvm: pblk: remove unnecessary argument lightnvm: pblk: remove unnecessary indirection lightnvm: pblk: return NVM_ error on failed submission lightnvm: pblk: warn in case of corrupted write buffer ...

dm: convert to bioset_init()/mempool_init()

2018-05-30T21:33:32+00:00

Convert dm to embedded bio sets. Acked-by: Mike Snitzer Signed-off-by: Kent Overstreet Signed-off-by: Jens Axboe

block: convert bounce, q->bio_split to bioset_init()/mempool_init()

2018-05-30T21:33:32+00:00

Convert the core block functionality to embedded bio sets. Reviewed-by: Christoph Hellwig Signed-off-by: Kent Overstreet Signed-off-by: Jens Axboe